Menu
EUR

Case IH 695 tractor parts & technical data

For the Case IH 695, also known as the IHC 695, this page lists more than 200 fitting parts, such as steering and front axle parts, lighting and electrics.

222 parts found for Case IH 695
Show:
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€124,74 €103,09 €114,76 €94,84
You save 8%
Stud exhaust 3/8" x 38 mm Case IH
Version: Ø 3/8" x 38 mm. Thread: 3/8". Length: 38 mm. More
Version: Ø 3/8" x 38 mm. Thread: 3/8". Length: 38 mm.
€4,58 €3,78
Sealing ring
€7,10 €5,87
Danfoss Orbitrol OSPC 100 OR Case IH, SAME, Deutz-Fahr
Danfoss
Type: OSPC 100 OR / 150N1222. More
Type: OSPC 100 OR / 150N1222.
€1.002,07 €828,16 €921,90 €761,90
You save 8%
Oil pressure switch engine 1/8" NPT, 0,4 - 0,7 bar, open function
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally closed, Blade terminal. More
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally cl...
€11,46 €9,47
Start safety switch differential lock M18 x 1,5 Case IH
Version: Differential lock (contact function) Thread: M18 x 1.5 2 blade terminals More
Version: Differential lock (contact function) Thread: M18 x 1.5 2 blad...
€40,09 €33,13 €36,88 €30,48
You save 8%
Shut-off valve fuel line Case IH C 50 - C 90, 238 - 4240
€50,95 €42,11 €46,87 €38,74
You save 8%
Sleeve drive shaft 24 teeth Case IH 85-1056, 3210-3230
€200,25 €165,50 €184,23 €152,26
You save 8%
KS Piston set, complete Ø 98,43 mm, combustion chamber Ø 56 mm Case IH
KS
Dimensions: 3 rings, Ø 98.43 mm, Gudgeon pin Ø 36 x 82 mm, Combustion chamber Ø 56 mm, Combustion chamber depth 24 mm, Ring carrier piston. Descrip... More
Dimensions: 3 rings, Ø 98.43 mm, Gudgeon pin Ø 36 x 82 mm, Combustio...
€242,91 €200,75 €223,48 €184,69
You save 8%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
Wiper motor with integrated switch 12 V, 115°, A 53 mm
Volts: 12. W: konisch 8 x M6 mm. Angle: 115 °. A: 53 mm. B: 34 mm. C: 28 mm. D: M12 x 1 mm. E: 6 mm. F: M8 mm. G: 57 mm. More
Volts: 12. W: konisch 8 x M6 mm. Angle: 115 °. A: 53 mm. B: 34 mm. C:...
€152,37 €125,93 €140,18 €115,85
You save 8%
LED work lights round Ø 120 mm floodlight 6800 lm, 60 W
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Voltage range (V): 10 - 30 | Power (watts): 60 | Protection class: IP6K9K / IP67 | W... More
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Volt...
€85,72 €70,84 €78,86 €65,18
You save 8%
HELLA Rocker switch hazard lights locks in place, 7 connections 6,3 mm
HELLA
Version: Insert with symbol must be ordered separately. Without location light, with function light, 7 blade terminals 6.3 mm, 2 switch positions: 0: ... More
Version: Insert with symbol must be ordered separately. Without locati...
€32,91 €27,20
LUK Clutch kit with thrust bearing and pilot bearing Case IH 248 - 4240
LUK
Contents: Pressure plate 458131003813, clutch plate 458331015411, release bearing 458500104650, pilot bearing 458410002641 More
Contents: Pressure plate 458131003813, clutch plate 458331015411, rele...
€915,73 €756,80 €842,47 €696,26
You save 8%
LUK Clutch plate 310TDCN 1 1/8 inch, 10 splines, sintered Case IH
LUK
Material specifications: Sintered clutch lining | Dimensions (inches): 1 1/8"" 10 grooves More
Material specifications: Sintered clutch lining | Dimensions (inches):...
€336,34 €277,97 €309,43 €255,73
You save 8%
Alternator 14 V, 70 A, flange 82 mm
Form: A | Flange size (mm): 82,0 | Direction of rotation: ↻ | Installation angle (°): l 60 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm... More
Form: A | Flange size (mm): 82,0 | Direction of rotation: ↻ | Instal...
€154,77 €127,91 €142,39 €117,68
You save 8%
Elring Cylinder head gasket 1,59 mm Case IH engine D-206, D-239, D-246, D-268
€118,89 €98,26 €109,38 €90,40
You save 8%
FEBI Alternator 14 V / 70 A, form A, flange 80,5 mm
FEBI
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguson More
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguso...
€213,83 €176,72 €161,65 €133,60
You save 24%
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: Ø 168 x 116 mm. Mount... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€81,44 €67,31 €78,43 €64,82
You save 4%
Internal plate PTO clutch 2,1 mm, inner 93,3 mm, outer 125 mm
Version: thickness = 2,1 mm inner = 93,3 mm outer 125 mm More
Version: thickness = 2,1 mm inner = 93,3 mm outer 125 mm
€34,20 €28,26 €31,46 €26,00
You save 8%
Clutch plate 310 CCE sintered, 23,4 x 28,9 mm, 10 splines Case IH
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sin...
€262,94 €217,31 €241,90 €199,92
You save 8%
Thrust bearing 60 x 102 x 20,5 mm Case IH
Dimensions (mm): 60 x 102 x 20.5 More
Dimensions (mm): 60 x 102 x 20.5
€45,69 €37,76 €42,03 €34,74
You save 8%
Elring Gasket set lower Case IH engine D-206, D-239, D-246, D-268
Elring
Additional information: Without cylinder liner gasket set More
Additional information: Without cylinder liner gasket set
€319,07 €263,69 €293,54 €242,60
You save 8%
Starter ring gear Ø 410/372 mm, 128 teeth Case IH
Version: Ø 410/372 mm, 128 teeth. More
Version: Ø 410/372 mm, 128 teeth.
€94,33 €77,96 €86,78 €71,72
You save 8%
Crankshaft seal set for Case IH
Menke no.: 63685. More
Menke no.: 63685.
€59,48 €49,16 €54,72 €45,22
You save 8%
Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€14,85 €12,27
MAHLE Alternator 14 V, 100 A, flange 82 mm
MAHLE
Nominal voltage (V): 14 | Additional information: Compact alternator, dust-tight | Mounting L / d / R (mm): 82,0 / 8,2 / 86,0 | Charging current (A): ... More
Nominal voltage (V): 14 | Additional information: Compact alternator, ...
€410,36 €339,14 €245,78 €203,13
You save 40%
HELLA Starter motor 12 V, 3 kW, 10 teeth, Ø 89 mm, clockwise
€600,18 €496,02 €462,42 €382,17
You save 23%
PTO shaft end piece 244,5 mm Case IH
Version: Length 244,5 mm. More
Version: Length 244,5 mm.
€231,13 €191,02 €212,64 €175,74
You save 8%
Internal plate Hi-Lo PTO shaft 2 mm, 98 - 125 mm Case IH
Version: thickness = 2 mm inner = 98 mm outer = 125 mm More
Version: thickness = 2 mm inner = 98 mm outer = 125 mm
€33,72 €27,87 €31,02 €25,64
You save 8%
LUK Clutch kit without release bearing Case IH 248 - 4240
LUK
Supplementary set: Without release bearing | Contents: Pressure plate 458131003811, clutch plate 458331015411 More
Supplementary set: Without release bearing | Contents: Pressure plate ...
€752,77 €622,12 €692,55 €572,35
You save 8%
LUK Thrust bearing 2,375 x 4 x 0,8 inch Case IH, McCormick
LUK
Dimensions (inches): 2.375"" x 4"" x 0.8"" More
Dimensions (inches): 2.375"" x 4"" x 0.8""
€104,21 €86,12 €95,87 €79,23
You save 8%
Silencer Ø 49 mm, 1200 mm, lower liggend Case IH 238 - 4230
€92,88 €76,76 €85,45 €70,62
You save 8%
Prestolite Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
€252,98 €209,07 €232,74 €192,35
You save 8%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
MAHLE Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 89 mm, l 135
€610,79 €504,79 €548,74 €453,50
You save 10%
Axial joint 180 mm, M20 x 1,5 / M18 x 1,5, 32 °
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€43,18 €35,69 €39,73 €32,83
You save 8%
Axial joint 180 mm, M20 x 1,5, M18 x 1,5, 32°
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€76,07 €62,87 €69,98 €57,84
You save 8%
Track rod 500 mm, 7/8" x 16, taper 15,4 - 17,9 mm, 9/16" x 18
A: 500 mm. B: 7/8" x 16 mm. C: 15,4 - 17,9 mm. G: . D: 9/16" x 18 mm. F: 20,75 mm. More
A: 500 mm. B: 7/8" x 16 mm. C: 15,4 - 17,9 mm. G: . D: 9/16" x 18 mm. ...
€126,19 €104,29 €116,09 €95,95
You save 8%
Gasket set lower Case IH 474-884, Series 32-4240, Hydro 84
Additional information: Without cylinder liner gasket set. Menke no.: 59577. More
Additional information: Without cylinder liner gasket set. Menke no.: ...
€64,36 €53,19 €59,21 €48,93
You save 8%
Internal plate differential catch 2,8 mm, 44 - 71,7 mm, 22 teeth
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€16,03 €13,24
External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth More
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth
€8,15 €6,74
SACHS Clutch plate 310 CCE, 23,4 x 28,9 mm, 10 splines sintered Case IH
SACHS
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sin...
€387,65 €320,37 €356,64 €294,74
You save 8%
Axial joint 180 mm, M20 x 1,5, M22 x 1,5, 30°, Ø 35 mm
A: 180 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. F: 30 °. Ø B: 52 mm. Ø E: 35 mm. More
A: 180 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. F: 30 °. Ø B: 52 mm. Ø...
€69,51 €57,45 €63,95 €52,85
You save 8%
Ring gear Ø 405/371 mm, 126 teeth Case IH
Version: Ø 405/371 mm  126 teeth. More
Version: Ø 405/371 mm  126 teeth.
€78,79 €65,12 €72,49 €59,91
You save 8%
Side plate gasket engine block Case IH
€35,47 €29,31 €32,63 €26,97
You save 8%
Lifting spindle complete 580 - 710 mm, thread 7/8", yoke 45 mm Case IH
Dimensions: Length min. = 580, Length max. = 710, Thread = 7/8", Ø top = 16, Ø bottom = 19, Clevis width = 45 mm. More
Dimensions: Length min. = 580, Length max. = 710, Thread = 7/8", Ø to...
€172,85 €142,85 €159,02 €131,42
You save 8%
Showing 1 - 48 of 222

Case IH 695 parts for the axle, engine and PTO

Plenty of these tractors still carry the IHC 695 name on the hood, and it is the same model as the Case IH 695. More than 200 new parts are listed for it here, from GRANIT, ZF, HELLA, Carraro and LUK among others.

Front axle and steering

Axle bearings, axial joints and ball joints cover the front axle and the steering. Play in the steering usually comes from a worn ball joint or axial joint. With the engine running, have someone rock the steering wheel while you watch the joints. If the ball moves in its housing before the wheel responds, it needs replacing.

Engine

  • pistons and piston ring sets for a rebuild
  • crankshaft seal sets
  • O-rings and sealing rings, for example on the feed pump
  • thermostat gaskets
  • brass bushes for the nozzle holders
  • radiator hoses

PTO clutch and electrics

For the PTO clutch there are internal and external plates. Replace them as a full set, and when you strip the pack look for blued or warped plates, which tell you the clutch has been slipping. On the electrical side you will find flasher units and rocker switches.

Matching parts to your 695

The serial plate shows if you have a 695 or a 695 XL, and that difference matters. After that, the old part settles it. Gaskets, plates and joints often have a number on them that you can compare with the product details.

Indicators and switches

If the indicators suddenly flash twice as fast, it is usually a blown bulb rather than a faulty flasher unit. Check every bulb and the earth on the rear lights first. If the fault stays, then the flasher unit is due. When converting to LED lighting, bear in mind that a standard flasher unit does not always cope with it. Rocker switches on the dash wear inside at the contacts. A switch that runs warm or needs flicking several times before the lamp comes on should be replaced. At this age, check the radiator hoses every season for fine cracks at the ends, where they fail first.

When working on the front axle, replace the axle bearings on each side together with the seal next to them. A new bearing behind an old, leaking seal will not last, because dirt and water find their way straight in.

Close relatives

The Case IH 695 XL and the Case IH 895 XL come from the same series and each have a page with the parts for that model, so there is no need to guess which version a part was meant for. The rest of the brand is on Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart