Whatever your Case IH Puma 195 needs, you can search more than 300 parts for this model here, such as trailer couplings, electrics and lighting.
A Puma 195 spends its days pulling heavy trailers and implements, and the rear of the tractor takes the punishment. This page lists more than 300 parts that fit the Case IH Puma 195, from GRANIT, Scharmüller, ROCKINGER, GRAMMER and Sauermann.
For coupling up there are automatic drawbars, Piton Fix hitches, top drawbars, automatic hitch jaws and height adjustable adapter plates. You will also find parts for the forced steering system used with steered trailers.
A practical point on adapter plates: the hole pattern is only half the story. The rail width has to match the guide on your Puma as well. Measure the rail before ordering, and grease the guide once the plate is fitted so that you can still adjust its height later without having to knock it loose.
After a long day in the Puma 195, a tired seat is the first thing you notice. There are air suspended GRAMMER tractor seats and PROBOSS seats, some with a seat heater. Mirrors and gas struts complete the cab side.
A charge warning light or a flat battery does not automatically mean a bad alternator. With the engine running, measure the voltage at the battery terminals, check the belt tension and make sure the earth cable is tight and clean. Only when all of that is in order and the voltage stays low is a new alternator the answer. On a Piton Fix hitch, keep the locking pin clean and lightly greased so it slides smoothly when coupling up.
The serial number of your Puma 195 is on the type plate. For sensors and switches, the number on the old part together with the pin count of its plug is your safest guide. For a drawbar, compare the rail width and the pin diameter.
The Case IH Puma series includes more models, each with a parts page of its own:
The Puma 180 and Puma 210 are part of the same series. For any other tractor from the brand, go to the page with all Case IH parts.