Menu
EUR

New Holland T4030 tractor parts & technical data

In need of parts for the New Holland T4030? This T4000 series page lists more than 200 items, trailer couplings, electrics and lighting being a few examples.

200 parts found for New Holland T4030
Show:
GRANIT Brake light switch oil pressure thread 1/8 NPT, with plug connection
GRANIT
Version: Thread 1/8" NPT, With plug connection. More
Version: Thread 1/8" NPT, With plug connection.
€59,28 €48,99 €56,30 €46,53
You save 5%
GRAMMER Tractor seat air suspended Compacto COMFORT S fabric, seat width 400 mm
GRAMMER
Comfort seat with air suspension and 12V compressor. Height adjustment 60 mm continuous. Weight adjustment 50 - 130 kg. Longitudinal adjustment 180 mm... More
Comfort seat with air suspension and 12V compressor. Height adjustment...
€1.120,00 €925,62
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.073,19 €886,93 €1.019,50 €842,56
You save 5%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€627,55 €518,64
Steering cylinder New Holland T4.75-T4.105, T5.85-T5.110, TN60-TN85
€463,48 €383,04 €419,30 €346,53
You save 10%
Bosch/Rexroth Double pump 19 + 11 cm³, B 17 x 14, 9 splines, right
Bosch/Rexroth
Direction of rotation: Clockwise | Output volume (cc/rev): 19 + 11 | Drive shaft: Splined shaft B 17 x 14 Z9 | Bosch no.: 0517665019 More
Direction of rotation: Clockwise | Output volume (cc/rev): 19 + 11 | D...
€1.300,75 €1.075,00 €1.235,70 €1.021,24
You save 5%
Cobo Indicator/position light left square, 580 mm cable New Holland
Cobo
Cable length (mm): 580 | Installation location: Left | Light function: With indicator light, with position light | Cable length (m): 0.58 | Form: Squa... More
Cable length (mm): 580 | Installation location: Left | Light function:...
€169,64 €140,20 €161,15 €133,18
You save 5%
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5185602 More
Reference no.: 5185602
€188,76 €156,00 €179,30 €148,18
You save 5%
BOSCH Micro relays 12 V / 30 - 20 A, 5-pin, 6,3 mm blade connection
BOSCH
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 mm More
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 m...
€10,70 €8,84
GRANIT Cylinder hydraulic steering New Holland
€768,39 €635,03 €729,95 €603,26
You save 5%
GRAMMER Seat Compacto Basic S MSG83/511, mechanical, PVC, 400 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 400 mm. Fore/aft isolator: Optional. Sea... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.010,89 €835,45 €960,30 €793,64
You save 5%
GRANIT Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
€48,32 €39,93 €45,90 €37,93
You save 5%
Hydraulic top link cat. 2, 580 - 798 mm, stroke 218 mm, Ø 70 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 580 / 798 mm. Piston rod Ø D: 35 mm. Cylinder Ø inner E: 70 mm. Check valve: Top. Lifting force: 6 t. Tensile... More
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 580 / 798 mm. Piston rod Ø D: ...
€593,83 €490,77 €537,25 €444,01
You save 10%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
ROCKINGER Flange hitch with manual plug 31,5 mm, 160 x 100 mm, M21
ROCKINGER
Lock: Manual pin. Hole pattern: 160 x 100 mm. Load capacity: 2000 kg. D-value: 89,3 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. Connecting pin: ... More
Lock: Manual pin. Hole pattern: 160 x 100 mm. Load capacity: 2000 kg. ...
€382,72 €316,30 €307,71 €254,31
You save 20%
GRANIT Seal kit Steyr Kompakt, New Holland T4, T4000, Case IH Farmall C
€143,57 €118,65 €136,35 €112,69
You save 5%
Potentiometer transmission for electronic control unit with connector
Version: For electronic control unit, Connection cable with plug. More
Version: For electronic control unit, Connection cable with plug.
€145,39 €120,16 €138,10 €114,13
You save 5%
GRANIT Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
GRANIT
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€29,20 €24,13
BOSCH Micro relays changeover contact 12 V / 30 - 20 A, parallel resistor
BOSCH
Version: 12 V / 30 - 20 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks. More
Version: 12 V / 30 - 20 A, Without bracket, 5-pin, blade terminal 6.3 ...
€16,75 €13,84
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
ROCKINGER Trailer coupling rail width 315 mm, coupling pin 38 mm, 2000 kg
ROCKINGER
Guide width (mm): 30 | Colour: Black | Connecting pin (mm): 38 | Detent pin Ø (mm): 20 | Rail width (mm): 315 | D-value (kN): 120,0 | Load capacity (... More
Guide width (mm): 30 | Colour: Black | Connecting pin (mm): 38 | Deten...
€1.387,60 €1.146,78
GRANIT Steering cylinder Case IH, New Holland, Steyr
GRANIT
Reference no.: 5178707 More
Reference no.: 5178707
€1.184,15 €978,64 €1.124,90 €929,67
You save 5%
SANDEN Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, PV4, 190 ccm oil
SANDEN
Fixing: DM | Reference no.: 8279 | Pulley Ø (mm): 112 | Refrigerant: R 134a | Nominal voltage (V): 12 | Connection: PV4 | For compressor: SD7H15 | Oi... More
Fixing: DM | Reference no.: 8279 | Pulley Ø (mm): 112 | Refrigerant: ...
€646,14 €534,00 €613,80 €507,27
You save 5%
Showing 49 - 72 of 200

New Holland T4030 parts: starting, lighting and clutch

The New Holland T4030 is the tractor that gets used every day for feeding, shunting trailers or taking the mower down the road. On a machine like that you want it to fire up first time and you want the lights to work. This page lists more than 200 New Holland T4030 parts, including makes such as GRANIT, ROCKINGER, Cobo, Walterscheid and LUK.

When it will not start

There are standard starter motors and gear reduction starters for the T4030, together with relays and micro relays in the starting circuit. Before swapping a starter, check the battery terminals and the earth strap between engine and chassis, because a corroded earth sounds exactly like a tired starter. If the relay clicks but the engine does not turn, the starter itself is the likelier cause. When choosing a new one, compare the number of teeth and the direction of rotation with the unit that comes out.

Lights and mirrors for road work

For road travel there are indicator and position lights, rear lights and mirrors. A gas strut for the windscreen keeps the screen properly open on warm days. Replace the struts as a pair so both sides push equally.

Clutch, linkage and drawbar

In the driveline there are thrust bearings for the driving clutch, including LUK parts. If the clutch is apart anyway, a new thrust bearing goes in at the same time. For the rear linkage there are lifting shaft seals and complete seal kits, and at the back you can fit an automatic drawbar, Piton Fix, adapter plates and a flange hitch.

  • starter motors, gear reduction starters and relays
  • indicator lights, rear lights and mirrors
  • thrust bearings and seal kits
  • drawbar, Piton Fix and flange hitch

A flange hitch needs a different kind of care than a pin-type drawbar. When fitting it, make sure the flange sits flat against its mounting and tighten the bolts in a crosswise pattern. After the first few days with a heavy trailer, go over them again, because a new joint can still settle.

Getting the right fit

The T4030 sits in the T4000 series. The type plate confirms you are working on a T4030, and the old part often still carries a reference number that lets you match the replacement with confidence. With lights, check left or right as well.

Running other tractors from the same series? See the pages for the New Holland T4050 and the New Holland T4020. The remaining models of the brand are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart