Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

New Holland TD95D tractor parts & technical data

Looking for New Holland TD95D parts? This page lists more than 200 items that fit, including electrics, brake and transmission parts, and trailer couplings.

212 parts found for New Holland TD95D
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€333,37 €275,51
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120 kN. Plate height: 160 mm. Colour: Black. Overhang: ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.616,17 €1.335,68 €1.271,24 €1.050,61
You save 21%
AKS-Dasis Thermostat airco Case IH, Fiat, Ford, New Holland
AKS-Dasis
Version: Air conditioning system More
Version: Air conditioning system
€142,98 €118,17 €131,54 €108,71
You save 8%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49521. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Men...
€32,69 €27,02 €30,07 €24,86
You save 8%
GRAMMER Seat Compacto Basic S MSG83/511, mechanical, PVC, 400 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 400 mm. Fore/aft isolator: Optional. Sea... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.054,87 €871,79 €970,48 €802,05
You save 8%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.736,14 €1.434,83 €1.647,25 €1.361,36
You save 5%
Steering cylinder hydraulic steering Case IH, New Holland
€481,32 €397,79 €442,81 €365,96
You save 8%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,03 €1.402,50
You save 21%
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€35,42 €29,27 €32,59 €26,93
You save 8%
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€183,54 €151,69 €168,86 €139,55
You save 8%
Danfoss Orbitrol OSPC 100 ON Case IH, Fiat, New Holland
Danfoss
Type: OSPC 100 ON / 150-1151 More
Type: OSPC 100 ON / 150-1151
€1.094,17 €904,27 €1.006,64 €831,93
You save 8%
Eaton Driven gear wheel transmission
Eaton
Reference no.: 5169606 More
Reference no.: 5169606
€136,74 €113,01 €125,80 €103,97
You save 8%
Eaton Drive pinion transmission 2,65 kg
Eaton
Reference no.: 5172047 More
Reference no.: 5172047
€418,94 €346,23 €385,42 €318,53
You save 8%
Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
Dimensions: 23 x 37 x 11 mm. More
Dimensions: 23 x 37 x 11 mm.
€25,23 €20,85
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm): 390 | Detent pin Ø (mm): 25 | Load capacity (kg): 2500 | Descripti... More
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail...
€1.157,46 €956,58 €1.064,86 €880,05
You save 8%
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€30,45 €25,17
MANN-FILTER Secondary filter main insert C14101, C14202/1, C14210/2
MANN-FILTER
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77 mm. D: 82 mm. MANN no.: CF850/2. H: 318 mm. Fleetguard no.: AF25484. Menke no.:... More
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77...
€33,70 €27,85
Clutch shaft transmission Fiat, IHC, New Holland
€670,98 €554,53 €617,30 €510,17
You save 8%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.422,99 €1.176,02 €1.297,49 €1.072,31
You save 9%
Sauermann Drawbar inner part 320 mm, coupling pin 31 mm, 2000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 80,4 kN. Colour: Black. More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€716,17 €591,88 €658,88 €544,53
You save 8%
Gear wheel main shaft 1e gear 21/22 teeth Fiat, New Holland
€49,12 €40,60 €45,19 €37,35
You save 8%
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, V/TO
MAHLE
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Connection: V/TO | Suitable oil: PAG 46 | Pulley Ø (mm): 132 More
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Co...
€513,19 €424,12 €461,06 €381,04
You save 10%
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5185602 More
Reference no.: 5185602
€196,97 €162,79 €181,21 €149,76
You save 8%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length (mm): 203 | Weight (g): 400 | Connection thread E: 3/8"" | Dimensions... More
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 6...
€58,64 €48,46 €53,95 €44,59
You save 8%
SANDEN Air conditioning compressor 12 V, pulley Ø 119 mm, 2 grooves, 200 ccm oil
SANDEN
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fixing: EM | Suitable oil: SP 10 | Oil quantity (ccm): 200 | Refrigerant: R 134a More
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fi...
€732,23 €605,15 €673,65 €556,74
You save 8%
Pilot bearing 17 x 47 x 14 mm
Dimensions (mm): 17 x 47 x 14 More
Dimensions (mm): 17 x 47 x 14
€6,59 €5,44
MAHLE Alternator 14 V, 80 A, flange 67 mm, with fan
MAHLE
Belt width (mm) / type: - | Flange size (mm): 67,0 | Installation angle (°): 0 | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 80 | Addition... More
Belt width (mm) / type: - | Flange size (mm): 67,0 | Installation angl...
€331,08 €273,62 €198,29 €163,88
You save 40%
LED main headlight square 155 x 102 x 80,5 mm, H4, 12/24 V, built-in
Protection class: IP69K | Form: Rectangular | Test mark: UKCA, RoHS, CE, ECE R10, R148, R149 | Cable length (m): 0.1 | Power consumption (W): Abblendl... More
Protection class: IP69K | Form: Rectangular | Test mark: UKCA, RoHS, C...
€113,13 €93,50 €104,08 €86,02
You save 8%
Eaton Drive pinion transmission 1,37 kg
Eaton
Reference no.: 5179673 More
Reference no.: 5179673
€228,28 €188,66 €210,02 €173,57
You save 8%
Eaton Gear wheel transmission 1,57 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125013 More
Reference no.: 5125013
€326,26 €269,64 €300,16 €248,07
You save 8%
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
FEBI
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€30,67 €25,35 €15,73 €13,00
You save 49%
MAHLE Gear reduction starter 12 V, 4,2 kW, 9 teeth, Ø 110 mm, clockwise
€639,84 €528,79 €383,22 €316,71
You save 40%
Gear wheel PTO shaft 14 / 57 teeth Fiat, New Holland
Number of teeth: 14/57. More
Number of teeth: 14/57.
€120,71 €99,76 €111,05 €91,78
You save 8%
Planetary gear transmission 19 / 14 teeth New Holland
Number of teeth: 19/14. More
Number of teeth: 19/14.
€59,07 €48,82 €54,34 €44,91
You save 8%
Sleeve for transmission Fiat, New Holland
€252,83 €208,95 €232,60 €192,23
You save 8%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,13 €1.353,83
You save 21%
Work lamp angular H3, 12 V, 55 W Case IH, New Holland
Bulbs included: - | Form: Square | Power consumption (W): 55 | Nominal voltage (V): 12 | Bulb: H3 More
Bulbs included: - | Form: Square | Power consumption (W): 55 | Nominal...
€224,02 €185,14
Eaton Link wheel Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125007 More
Reference no.: 5125007
€300,25 €248,14 €276,23 €228,29
You save 8%
Eaton Main shaft transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5161817 More
Reference no.: 5161817
€433,08 €357,92 €398,43 €329,28
You save 8%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, Ø 110 mm, clockwise
€657,02 €542,99 €506,23 €418,37
You save 23%
PTO shaft end piece 260 mm Ford, Fiat, New Holland
Version: Length 260 mm. More
Version: Length 260 mm.
€110,09 €90,98 €101,28 €83,70
You save 8%
As PTO shaft 540 / 1.000 rpm. Fiat, New Holland
Version: PTO shaft 540/1000 rpm. More
Version: PTO shaft 540/1000 rpm.
€417,09 €344,70 €383,72 €317,13
You save 8%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.022,73 €845,23 €940,91 €777,61
You save 8%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
MANN-FILTER Secondary air filter CF990/2, main filter C17337/2
MANN-FILTER
Suitable main filter 565C17337.2 More
Suitable main filter 565C17337.2
€37,63 €31,10
LUK Clutch kit with thrust bearing and pilot bearing Case IH, New Holland
LUK
Contents: Pressure plate 458231010511, clutch plate 458328033210, release bearing 458500045900, release bearing 458500028440, pilot bearing 4584100025... More
Contents: Pressure plate 458231010511, clutch plate 458328033210, rele...
€1.315,67 €1.087,33 €1.260,42 €1.041,67
You save 4%
Showing 1 - 48 of 212

New Holland TD95D parts

The TD95D is the kind of tractor many owners still maintain themselves, and that only works when the part fits first time. This page lists more than 200 replacement parts for it, including GRANIT, Eaton, MAHLE, GRAMMER and LUK.

Splitting for a clutch job

If you are splitting the TD95D to replace the clutch, fit a new thrust bearing while it is apart. A release bearing that looks fine on reassembly can start to squeal a few months later, and then the whole job starts again. Spin the old bearing by hand. If it feels rough or grinds, the decision is made. Grease the guide sleeve lightly and keep grease well away from the clutch plate.

What else is here for the TD95D

  • Transmission: gear wheels
  • Steering: ball joints
  • Engine: cylinder head gaskets, sealing rings, for example for the piston, thermostats with matching gaskets and O-rings, and V-belts
  • Electrics: alternators, starter motors and gear reduction starters
  • Cab: air conditioning compressors and GRAMMER Compacto seats
  • Rear: drawbars

When you change the thermostat, change its gasket and O-ring too. Old seals are flattened and tend to weep once refitted.

Cab air conditioning

If the air conditioning only blows warm air, first check whether the compressor clutch engages when you switch it on. No click and a stationary pulley face point to the power feed, a fuse or the clutch itself. If the compressor turns but the air stays warm, refrigerant has usually leaked out. After fitting a new compressor, have the system evacuated and recharged by a qualified air conditioning workshop, with the correct amount of compressor oil.

Steering check

To check a ball joint, have someone rock the steering wheel while you watch the joint. Any visible movement inside the joint means it is time for a new one. Compare the thread and taper of the old joint with the new one before fitting.

Finding the right TD95D part

The rating plate confirms you are working on a TD95D. From there, use the old part. Thermostats, starters and alternators usually carry a reference number you can compare with the item details on this page. On an air conditioning compressor, count the grooves on the pulley as well, so the belt runs true afterwards.

The TD95D is part of the New Holland TD series. Parts for the brand's other tractors are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart