Menu
EUR

New Holland T6050 tractor parts & technical data

Engine parts, electrics and trailer couplings for the New Holland T6050 are in one place here. More than 350 parts for this T6000 series model, easy to browse.

380 parts found for New Holland T6050
Show:
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€651,63 €538,54 €627,60 €518,67
You save 4%
DANA Spicer Synchro unit, complete 12 x 12 tray 1ste / 2de Case IH, New Holland
€552,35 €456,49 €508,16 €419,97
You save 8%
Bosch/Rexroth Hydraulic pump 16 cm³, splines B 17 x 14, 9 splines, anticlockwise
Bosch/Rexroth
Direction of rotation: Anticlockwise | Output volume (cc/rev): 16 | Drive shaft: Splined shaft B 17 x 14 Z9 | Bosch no.: 0517625308 More
Direction of rotation: Anticlockwise | Output volume (cc/rev): 16 | Dr...
€895,84 €740,36 €824,17 €681,13
You save 8%
Scharmüller Drawbar frame 10 kN, rail 200 mm, guide 25 mm, pin Ø 16 mm
Scharmüller
Detent pin Ø (mm): 16 | Category: Bearing supports | Load capacity (kg): 295 | Guide width (mm): 25 | Rail width (mm): 200 | Colour: Kubota grey | Ve... More
Detent pin Ø (mm): 16 | Category: Bearing supports | Load capacity (k...
€972,78 €803,95 €894,96 €739,63
You save 8%
Scharmüller Adapter plate 330 mm rail, guide 32 mm, hole pattern 160 x 100 mm
Scharmüller
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Dc-value (kN): 106 | D-value (... More
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole...
€600,57 €496,34 €552,52 €456,63
You save 8%
Scharmüller Forced steering K50, 250 mm, both sides, AGCO gray, 18 kg
Scharmüller
Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | Assembly notes...
€1.144,45 €945,83 €1.052,89 €870,16
You save 8%
Eaton Planetary gear transmission, 994 g
Eaton
Reference no.: 5145497 More
Reference no.: 5145497
€85,99 €71,07 €79,11 €65,38
You save 8%
BOSCH Micro relays 12 V / 30 - 20 A, 5-pin, 6,3 mm blade connection
BOSCH
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 mm More
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 m...
€11,20 €9,26
Oil sump gasket Case IH, New Holland, Steyr
€123,52 €102,08 €113,64 €93,92
You save 8%
Cylinder left hydraulic steering New Holland Series T6-T6000
€340,91 €281,74 €313,64 €259,20
You save 8%
Scharmüller Drawbar ball 50, rail 295 mm, pin Ø 25 mm, 200 kg, black
Scharmüller
Rail width: 295 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 200 kg. D-value: 17 kN. Overhang: 127 mm. Plate height: 133 mm. Hole: M16... More
Rail width: 295 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€832,33 €687,88 €780,91 €645,38
You save 6%
Repair set polyurethane beglazingskit, Terostat primer - 310 ml
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper, - Application nozzle, - Cleaner, - Cleaning sponge, - Instructions (... More
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - ...
€58,03 €47,96 €53,39 €44,12
You save 8%
Top link hook / clevis cat. 28,4, M36 x 3, 647 - 913 mm
I: M36 x 3 mm. A cat.: 3 / 32. B cat.: 3 / 32. D: 647 / 913 mm. To fit: New Holland. Type: Tail hook/clevis joint. Top link type: mechanical. More
I: M36 x 3 mm. A cat.: 3 / 32. B cat.: 3 / 32. D: 647 / 913 mm. To fit...
€287,63 €237,71 €264,62 €218,69
You save 8%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.324,09 €1.094,29
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
Scharmüller Trailer coupling rail width 295 mm, coupling pin 31 mm, 2500 kg
Scharmüller
Rail width (mm): 295 | Load capacity (kg): 2500 | Colour: Black | Guide width (mm): 26 | Plate height (mm): 133 | D-value (kN): 82,4 | Detent pin Ø (... More
Rail width (mm): 295 | Load capacity (kg): 2500 | Colour: Black | Guid...
€676,27 €558,90 €622,17 €514,19
You save 8%
MAHLE Air conditioning compressor 12 V, pulley Ø 116 mm, 4 grooves, PAD
MAHLE
Nominal voltage (V): 12 | Refrigerant: R 134a | Pulley Ø (mm): 116 | Additional information: With sealing ring | Connection: PAD | Suitable oil: PAG ... More
Nominal voltage (V): 12 | Refrigerant: R 134a | Pulley Ø (mm): 116 | ...
€547,60 €452,56 €327,99 €271,06
You save 40%
Scharmüller Drawbar 430 mm, 50 x 30 mm, ISO-50, 17 kN, position 1
Scharmüller
Mounting position: 1 | Lock: ISO-50 | Load capacity (kg): 100 | Trailer load (kg): 3500 | Colour: Kubota grey | Height (mm): 30 | Length (mm): 430 | C... More
Mounting position: 1 | Lock: ISO-50 | Load capacity (kg): 100 | Traile...
€232,65 €192,27 €214,04 €176,89
You save 8%
Pick-up hooks 320 mm, Ø 25 mm, 70 x 59 mm Case IH, New Holland
Width x height (mm): 70 x 59 | Length (mm): 320 | Hole Ø (mm): 25 More
Width x height (mm): 70 x 59 | Length (mm): 320 | Hole Ø (mm): 25
€218,56 €180,63 €201,08 €166,18
You save 8%
CARLISLE Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
CARLISLE
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth More
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth
€32,93 €27,21
Filter dryer airco 220 mm, Ø 64 mm, M/F Case IH, New Holland, Steyr
Dimensions (mm): - | Connection thread A: 14.3 | Outer length (mm): 220 | Material: Steel | Pressure switch thread size: 10.5 mm | Weight (g): 500 | C... More
Dimensions (mm): - | Connection thread A: 14.3 | Outer length (mm): 22...
€60,81 €50,26 €55,95 €46,24
You save 8%
Contact switch driver’s seat with magnet, electric
Version: Driver’s seat Switch assembly with magnet More
Version: Driver’s seat Switch assembly with magnet
€102,10 €84,38 €97,84 €80,86
You save 4%
Airco compressor 12 V, R 134a, pulley Ø 112 mm, PV4, 200 ccm oil
Pulley Ø (mm): 112 | Oil quantity (ccm): 200 | Suitable oil: PAG 46 | No. of grooves: PV4 | Nominal voltage (V): 12 | Refrigerant: R 134a | Cylinder ... More
Pulley Ø (mm): 112 | Oil quantity (ccm): 200 | Suitable oil: PAG 46 |...
€454,21 €375,38 €417,87 €345,35
You save 8%
FEBI Multi-rib belt 8 ribs Case IH, Steyr, New Holland
FEBI
To fit as: Case IH More
To fit as: Case IH
€47,53 €39,28 €17,58 €14,53
You save 63%
FEBI Cab filter 380 x 130 x 48 mm
€30,96 €25,59 €16,64 €13,75
You save 46%
Universal joint 30,15 x 81,9 mm, maintenance-free
A: 30,15 mm. B: 81,9 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,15 mm. B: 81,9 mm. Universal joint size: . Lubrication system: M...
€227,53 €188,04 €209,33 €173,00
You save 8%
Outer plate hand brake Case IH, New Holland, Steyr
€126,19 €104,29 €116,09 €95,95
You save 8%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.363,65 €1.126,98 €1.100,67 €909,64
You save 19%
Radiator 5 rows New Holland, Case IH, Steyr 110-175
To fit as:
New Holland Series T6: T6.120–T6.175; Series T6000: T6020–T6070 Tier 3
Case IH Series Maxxum: 110–140 Tier 3; Series Maxxum EP Tier...
More
To fit as:
New Holland Series T6: T6.120–T6.175; Series T6000: T602...
€1.440,97 €1.190,88 €1.375,69 €1.136,93
You save 5%
Fender bracket right rotatable complete Case IH, Steyr, New Holland
€593,54 €490,53 €546,06 €451,29
You save 8%
Walterscheid Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.852,29 €1.530,82 €1.464,43 €1.210,28
You save 21%
Sauermann Drawbar reinforced 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€1.184,83 €979,20 €1.090,04 €900,86
You save 8%
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.167,94 €965,24 €923,38 €763,13
You save 21%
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.285,58 €1.062,46 €990,51 €818,61
You save 23%
Spiegelarm right Case IH, New Holland
€162,32 €134,15 €149,33 €123,42
You save 8%
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Sauermann
Ø 40 mm drawbar eye, Ø 38 mm pin More
Ø 40 mm drawbar eye, Ø 38 mm pin
€877,53 €725,23 €807,33 €667,21
You save 8%
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.805,57 €2.318,65 €2.211,65 €1.827,81
You save 21%
LED low beam light oval 12/24 V, 24 W, 750 lm, 143 x 92 x 98 mm
Power (watts): 24 | Mounting size (mm): 166 | Bulb: LED | Form: Oval | Fixing: Bracket, stainless steel | EMC: CISPR 25 class 3 | Width (mm): 143 | Th... More
Power (watts): 24 | Mounting size (mm): 166 | Bulb: LED | Form: Oval |...
€88,60 €73,22 €81,51 €67,37
You save 8%
Locking plate fender Case IH, New Holland, Steyr
Locking plate for the fender bracket. Suitable for Case IH, New Holland and Steyr. More
Locking plate for the fender bracket. Suitable for Case IH, New Hollan...
€244,70 €202,23 €225,12 €186,05
You save 8%
Drive shaft 1115 mm Case IH, New Holland, Steyr
€553,51 €457,45 €509,23 €420,85
You save 8%
Handle New Holland T6.120 - T7.210, Case IH Puma 140 - 175CVX
€108,32 €89,52 €99,65 €82,36
You save 8%
Sauermann Handle set trailer coupling Ø 8 mm Case IH, New Holland, Steyr
€139,52 €115,31 €128,36 €106,08
You save 8%
Steering cylinder T6.155 Electro Command Stage V
€739,90 €611,49 €680,71 €562,57
You save 8%
Scharmüller Drawbar frame 12,9 kN, 500 kg, rail 160 mm, pin Ø 25 mm, standard
Scharmüller
Category: Bearing supports | Detent pin Ø (mm): 25 | Colour: Kubota grey | Guide width (mm): 16 | D-value (kN): 12,9 | Version: Standard | Load capac... More
Category: Bearing supports | Detent pin Ø (mm): 25 | Colour: Kubota g...
€668,46 €552,45 €614,98 €508,25
You save 8%
Scharmüller Drawbar frame 89,3 kN, rail width 335 mm, nose weight 4000 kg
Scharmüller
Colour: AGCO grey | Category: Lagerböcke | Lock: ball 80 | Load capacity (kg): 4000 | D-value (kN): 89,3 | Guide width (mm): 30 | Version: Standard |... More
Colour: AGCO grey | Category: Lagerböcke | Lock: ball 80 | Load capac...
€2.540,32 €2.099,44 €2.387,09 €1.972,80
You save 6%
Scharmüller Drawbar retrofit kit 820 x 80 x 35 mm, 46,8 kN, 1500 kg, cat. 2, black
Scharmüller
Version: Retrofit kits | Pin Ø (mm): 31,5 | Rail width (mm): 330 | Length (mm): 820 | D-value (kN): 46,8 | Colour: Black | Mounting position: 3 | Det... More
Version: Retrofit kits | Pin Ø (mm): 31,5 | Rail width (mm): 330 | Le...
€716,58 €592,21 €659,25 €544,84
You save 8%
Showing 49 - 96 of 380

New Holland T6050 parts

More than 350 parts have been listed for the New Holland T6050, covering the cooling system, the driveline, the cab and the hitch. They match the jobs that tend to land in a farm workshop or a contractor's yard: a leaking lift shaft seal, a clogged radiator, a gear switch that has stopped responding.

Driveline, engine and cooling

For the driveline there is a torsion damper. Engine and cooling parts include a radiator, a belt kit, an oil pressure switch and sensors, for example one for transmission oil temperature. Piston sealing rings and a lift shaft seal take care of the hydraulic side, along with a hydraulic cylinder for the linkage.

Cab and rear end

In the cab you will find a contact switch for the gearbox, tractor seats and LED work lights. For towing there are automatic drawbars, a Piton Fix, adapter plates and drawbar frames from ROCKINGER and Scharmüller, with GRANIT, Sauermann and Cobo also represented on this page.

Radiator tip

An engine that runs hot often has a radiator blocked on the outside by dust and chaff rather than on the inside. Blow the fins out from the engine side outwards at low pressure so you do not flatten them. If the radiator does need replacing, flush the system and refill with fresh coolant. Check the hoses and clamps at the same time, because a new radiator on a tired hose is simply the next leak waiting to happen.

Belt drive and oil pressure

A belt kit contains more than the belt for good reason. The tensioner and idler wear along with it, and a new belt running on a pulley with bearing play soon squeals again or even jumps off. Spin the pulleys by hand before refitting them. If the oil pressure warning comes on while the engine sounds normal, check the actual pressure with a separate gauge first. A faulty oil pressure switch is quick to replace, an engine run without oil pressure is not.

Getting the right version

The type plate on the tractor shows the model and serial number. Within the T6000 range some parts differ between versions, and those details tell you which one your tractor needs. If the old part is still legible, copy its reference number. With a torsion damper, count the teeth on the hub as well so you know it will sit on the shaft.

The other models in the same range each have a page with the parts recorded for them:

For all other models of the make, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart