Menu
EUR

New Holland T6070 tractor parts & technical data

The New Holland T6070 from the T6000 series has more than 350 matching parts here, such as trailer couplings, electrics and engine parts.

376 parts found for New Holland T6070
Show:
GRANIT Preheating relay 12 volt with plug connection
GRANIT
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€171,65 €141,86 €155,30 €128,35
You save 10%
Contact switch gear switch status HI gray
Version: Status switch, HI (grey). More
Version: Status switch, HI (grey).
€88,71 €73,31 €84,25 €69,63
You save 5%
GRANIT Oil pressure switch engine 1/4 x 18 NPTF, 0,2 - 0,5 bar, blade terminal
GRANIT
Version: Thread: 1/4 x 18 NPTF, Switching pressure: 0.2 - 0.5 bar, blade terminal 6.3 mm. More
Version: Thread: 1/4 x 18 NPTF, Switching pressure: 0.2 - 0.5 bar, bla...
€19,65 €16,24
Step tread 365 mm Case IH, Steyr, New Holland
Tractor types: Case IH Puma 115, 125, 130, 130 CVX, 140, 145, 145 CVX, 155, 160, 160 CVX More
Tractor types: Case IH Puma 115, 125, 130, 130 CVX, 140, 145, 145 CVX,...
€64,08 €52,96 €60,85 €50,29
You save 5%
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Sauermann
Ø 40 mm drawbar eye, Ø 38 mm pin More
Ø 40 mm drawbar eye, Ø 38 mm pin
€840,95 €695,00 €798,90 €660,25
You save 5%
GRANIT Locking plate fender Case IH, New Holland, Steyr
GRANIT
Locking plate for the fender bracket. Suitable for Case IH, New Holland and Steyr. More
Locking plate for the fender bracket. Suitable for Case IH, New Hollan...
€234,50 €193,80 €222,75 €184,09
You save 5%
GRANIT Yoke three-point Case IH, New Holland, Steyr
€107,93 €89,20 €102,50 €84,71
You save 5%
MAHLE Air conditioning compressor 12 V, pulley Ø 116 mm, 4 grooves, PAD
MAHLE
Nominal voltage (V): 12 | Refrigerant: R 134a | Pulley Ø (mm): 116 | Additional information: With sealing ring | Connection: PAD | Suitable oil: PAG ... More
Nominal voltage (V): 12 | Refrigerant: R 134a | Pulley Ø (mm): 116 | ...
€551,02 €455,39 €327,95 €271,03
You save 40%
Scharmüller Drawbar frame 12,9 kN, 500 kg, rail 160 mm, pin Ø 25 mm, standard
Scharmüller
Category: Bearing supports | Detent pin Ø (mm): 25 | Colour: Kubota grey | Guide width (mm): 16 | D-value (kN): 12,9 | Version: Standard | Load capac... More
Category: Bearing supports | Detent pin Ø (mm): 25 | Colour: Kubota g...
€643,75 €532,02
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
Rail width (mm): 330 | D-value (kN): 74 | Category: Bearing supports | Load capacity (kg): 3000 | Colour: Kubota grey | Version: Prepared for drawbar ... More
Rail width (mm): 330 | D-value (kN): 74 | Category: Bearing supports |...
€1.034,55 €855,00
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.052,10 €869,50
Scharmüller Drawbar retrofit kit 820 x 80 x 35 mm, 46,8 kN, 1500 kg, cat. 2, black
Scharmüller
Version: Retrofit kits | Pin Ø (mm): 31,5 | Rail width (mm): 330 | Length (mm): 820 | D-value (kN): 46,8 | Colour: Black | Mounting position: 3 | Det... More
Version: Retrofit kits | Pin Ø (mm): 31,5 | Rail width (mm): 330 | Le...
€690,10 €570,33
GRANIT Clutch housing Case IH Puma 115 - 165, New Holland T6030 - T7.210
€750,82 €620,51 €713,25 €589,46
You save 5%
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€758,99 €627,26 €639,25 €528,31
You save 16%
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Wabco
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including - EVOBUS - MERCEDES-BENZ | Inlet connection: 1: M22 x 1,5 | Version:... More
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit...
€74,90 €61,90 €71,15 €58,80
You save 5%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€22,55 €18,64
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
CARLISLE
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm More
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
You save 5%
GRANIT Contact switch driver’s seat with magnet, electric
GRANIT
Version: Driver’s seat Switch assembly with magnet More
Version: Driver’s seat Switch assembly with magnet
€97,80 €80,83
Holset Reman turbocharger engine 667TA Case IH, New Holland
€1.183,48 €978,08 €1.124,30 €929,17
You save 5%
MAHLE Alternator 14 V, 150 A, pulley-Ø 61 mm Case IH, New Holland, Steyr
MAHLE
Nominal values (V / A): 14 / 150 | Form: A | Belt width (mm) / type: PV x 8 | Mounting L / d / R (mm): 82,0 / 8,2 / 90,0 | Charging current (A): 150 |... More
Nominal values (V / A): 14 / 150 | Form: A | Belt width (mm) / type: P...
€634,51 €524,39 €396,55 €327,73
You save 38%
Cobo Headlight left H4, 12 V, built-in New Holland
Cobo
Installation location: Left | Bulb: 12V60/55W / H4 12V4WK / T4W 12V21WK / R21W | Nominal voltage (V): 12 | Mounting type: Flush mounting | Bulbs inclu... More
Installation location: Left | Bulb: 12V60/55W / H4 12V4WK / T4W 12V21W...
€333,05 €275,25 €316,35 €261,45
You save 5%
Scharmüller Forced steering 250 mm, K50, right, 2 ton, black, 11,23 kg
Scharmüller
Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour: Black | Lock: K50 | Assemb... More
Description: Approved for steering forces up to 20 kN (2 t) | Connecti...
€612,85 €506,49
Eaton Shift ring 616 g Case IH, Ford, New Holland, Steyr
Eaton
Reference no.: E6NN7106AA More
Reference no.: E6NN7106AA
€114,83 €94,90 €109,00 €90,08
You save 5%
LED work lights spotlight 4400 lm, 56 W, 10 - 30 V, 160 x 100 x 68 mm
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 class 4 | Width (mm): 160 | Theoretical luminous flux (lm): 5320 | Housing materia... More
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 cl...
€76,82 €63,49 €72,95 €60,29
You save 5%
Showing 145 - 168 of 376

New Holland T6070 parts

From the hitch at the back to the sensor in the transmission oil, this page covers more than 350 parts that fit the New Holland T6070. They come from GRANIT and from manufacturers such as Scharmüller, ROCKINGER, Sauermann and Cobo.

Engine temperature creeping up

When a T6070 starts running hot in summer, three parts deserve a look: the radiator, the fan clutch and the belt. Radiators, fan clutches and belt kits are all available here. A quick test for the fan clutch: after a hard job, switch off and turn the fan by hand. If it spins just as freely hot as it does cold, the clutch is no longer engaging and the radiator is starved of air. When fitting a new radiator, also clean the coolers in front of it, since dust and chaff packed between the fins cost as much cooling as a worn clutch.

Driveline, hydraulics and switches

Between engine and gearbox sits the torsion damper, which soaks up engine vibration. A rattle from the driveline at idle is a reason to check it. For the hydraulics there are cylinders, plus seals for the lifting shaft. Contact switches report gear selection, sensors monitor transmission oil temperature, and an oil pressure switch warns you when the engine loses pressure.

Hitching up

For the rear of the T6070 there are drawbars, drawbar frames, adapter plates and Piton Fix couplings. Measure the rail width and hole pattern on the existing frame before you choose an adapter plate, because a height adjustable plate only goes on cleanly when its holes line up with the frame. LED work lights and several tractor seats, including an air suspended fabric seat, complete the picture.

After fitting a new seat, set the suspension to the driver weight. An air seat set too hard is tough on the back, while one set too soft keeps bottoming out and wears faster. With an automatic drawbar, always check that the pin has fully dropped after hitching up.

Identifying parts for your T6070

Note the serial number from the type plate and look for a reference number on the part you are replacing. Each model in the T6000 series has its own variants, so compare dimensions and connections with the old part if anything is unclear.

If you also run other tractors from the T6000 series, these pages will help: New Holland T6010, New Holland T6020, New Holland T6030, New Holland T6040 and New Holland T6050. For the full brand, visit New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart