Menu
EUR

New Holland T6090 tractor parts & technical data

This page is for the New Holland T6090 in the T6000 Power Command series. Choose from more than 200 parts, including trailer couplings, electrics and lighting.

247 parts found for New Holland T6090
Show:
GRANIT Push button switch PTO shaft with connection cable and plug
GRANIT
Version: Front PTO operation, Connection cable with plug. More
Version: Front PTO operation, Connection cable with plug.
€194,61 €160,83 €176,00 €145,45
You save 10%
Cobo Indicator/position light oval PY21W, R5W left
Cobo
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Left. Cable length: 1200 mm. Type: Bulb. More
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation locatio...
€107,88 €89,16 €102,45 €84,67
You save 5%
GRANIT Preheating relay 12 volt with plug connection
GRANIT
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€171,65 €141,86 €155,30 €128,35
You save 10%
Contact switch gear switch status HI gray
Version: Status switch, HI (grey). More
Version: Status switch, HI (grey).
€88,71 €73,31 €84,25 €69,63
You save 5%
GRANIT Oil pressure switch engine 1/4 x 18 NPTF, 0,2 - 0,5 bar, blade terminal
GRANIT
Version: Thread: 1/4 x 18 NPTF, Switching pressure: 0.2 - 0.5 bar, blade terminal 6.3 mm. More
Version: Thread: 1/4 x 18 NPTF, Switching pressure: 0.2 - 0.5 bar, bla...
€19,65 €16,24
Step tread 365 mm Case IH, Steyr, New Holland
Tractor types: Case IH Puma 115, 125, 130, 130 CVX, 140, 145, 145 CVX, 155, 160, 160 CVX More
Tractor types: Case IH Puma 115, 125, 130, 130 CVX, 140, 145, 145 CVX,...
€64,08 €52,96 €60,85 €50,29
You save 5%
GRANIT Yoke three-point Case IH, New Holland, Steyr
€107,93 €89,20 €102,50 €84,71
You save 5%
MAHLE Air conditioning compressor 12 V, pulley Ø 116 mm, 4 grooves, PAD
MAHLE
Nominal voltage (V): 12 | Refrigerant: R 134a | Pulley Ø (mm): 116 | Additional information: With sealing ring | Connection: PAD | Suitable oil: PAG ... More
Nominal voltage (V): 12 | Refrigerant: R 134a | Pulley Ø (mm): 116 | ...
€551,02 €455,39 €327,95 €271,03
You save 40%
Scharmüller Drawbar frame 12,9 kN, 500 kg, rail 160 mm, pin Ø 25 mm, standard
Scharmüller
Category: Bearing supports | Detent pin Ø (mm): 25 | Colour: Kubota grey | Guide width (mm): 16 | D-value (kN): 12,9 | Version: Standard | Load capac... More
Category: Bearing supports | Detent pin Ø (mm): 25 | Colour: Kubota g...
€643,75 €532,02
Scharmüller Drawbar 526 mm, 50 x 30 mm, pin 31,5 mm, position 2
Scharmüller
Colour: Kubota grey | Width (mm): 50 | Category: Drawbar | Lock: Pin | Trailer load (kg): 5000 | Height (mm): 30 | Version: Standard | Pin Ø (mm): 31... More
Colour: Kubota grey | Width (mm): 50 | Category: Drawbar | Lock: Pin |...
€324,75 €268,39
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
Rail width (mm): 330 | D-value (kN): 74 | Category: Bearing supports | Load capacity (kg): 3000 | Colour: Kubota grey | Version: Prepared for drawbar ... More
Rail width (mm): 330 | D-value (kN): 74 | Category: Bearing supports |...
€1.034,55 €855,00
GRANIT Clutch housing Case IH Puma 115 - 165, New Holland T6030 - T7.210
€750,82 €620,51 €713,25 €589,46
You save 5%
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€758,99 €627,26 €639,25 €528,31
You save 16%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€22,55 €18,64
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
CARLISLE
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm More
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
You save 5%
MAHLE Alternator 14 V, 150 A, pulley-Ø 61 mm Case IH, New Holland, Steyr
MAHLE
Nominal values (V / A): 14 / 150 | Form: A | Belt width (mm) / type: PV x 8 | Mounting L / d / R (mm): 82,0 / 8,2 / 90,0 | Charging current (A): 150 |... More
Nominal values (V / A): 14 / 150 | Form: A | Belt width (mm) / type: P...
€634,51 €524,39 €396,55 €327,73
You save 38%
Scharmüller Forced steering 250 mm, K50, right, 2 ton, black, 11,23 kg
Scharmüller
Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour: Black | Lock: K50 | Assemb... More
Description: Approved for steering forces up to 20 kN (2 t) | Connecti...
€612,85 €506,49
GRANIT Seal kit hydraulic steering New Holland TM115-TM190
€122,61 €101,33 €116,45 €96,24
You save 5%
LUK Torsion damper 14 teeth, 35X40 Case IH, Steyr, New Holland
LUK
Number of teeth: 14. Tooth profile: 35x40. More
Number of teeth: 14. Tooth profile: 35x40.
€695,75 €575,00 €660,95 €546,24
You save 5%
Compressed air sensor M12 x 1,5 Case IH, New Holland
Connection: M12 x 1,5. More
Connection: M12 x 1,5.
€278,45 €230,12
Outer plate hand brake Case IH, New Holland, Steyr
€120,93 €99,94 €114,85 €94,92
You save 5%
Brake disc Ø 325 mm, thickness 9,6 mm, 14 teeth
€142,17 €117,50 €135,00 €111,57
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€664,77 €549,40 €587,90 €485,87
You save 12%
Showing 121 - 144 of 247

New Holland T6090 parts for the hitch, sensors and switches

The hitch on a New Holland T6090 takes a beating, and so do the small electrical parts that keep the driver informed. This page brings together more than 200 parts that fit the T6090, supplied by GRANIT alongside specialists such as Scharmüller, Rockinger, Sauermann and Walterscheid.

Drawbars, hitches and Piton Fix

For the rear of the tractor there are drawbar frames, height adjustable adapter plates, automatic drawbars, top drawbars and automatic hitches, plus a Piton Fix for heavy trailers. Forced steering components, such as rods welded at both ends with a lock, cover trailers with a steered axle, and trailer drawbars are part of the mix too.

A workshop tip: when a hitch starts to rattle, check the pin and the locking pin for wear before blaming the rail. A worn pin creates play that gradually works its way into the frame. Clean the guide and give it a thin coat of grease before sliding a new part in, so the height can still be adjusted after a wet winter.

Forced steering deserves a look at every major service. If the lock no longer clicks home cleanly, the trailer axle can steer when it should stay straight, and you tend to notice that halfway through a tight turn in the yard rather than on the open road.

Electrical parts for the T6090

On the electrical side you will find transmission oil temperature sensors, engine oil pressure switches, contact switches and push button switches. Work lamps and mirrors keep visibility up around the tractor, and sealing rings in several versions deal with weeping joints.

If the oil pressure warning light flickers at warm idle, measure the real pressure with a gauge first. When the reading is fine, the switch or its connector is to blame, and swapping it is a job of a few minutes. Always fit a new oil pressure switch with a fresh sealing ring, otherwise it will start weeping oil before long.

Work lamps age quietly as well. Once moisture gets past the seal, the lens fogs and the reflector dulls, so replacing the whole lamp usually beats fitting a new bulb into a wet housing.

Making sure it fits

Start with the serial number on the type plate of your tractor. The T6090 belongs to the T6000 Power Command range from New Holland. The reference number stamped or printed on the old part is the safest way to confirm a match, so compare it with the details shown on the product. For hitch parts, also note the rail width and the pin thickness of what is fitted now.

Running a T6080 as well? The New Holland T6080 parts page shows what fits that model. For every other New Holland tractor, start at New Holland parts, which saves time when you look after several machines from the brand.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart