Menu
EUR

New Holland T6.140 tractor parts & technical data

Need parts for your New Holland T6.140 from the T6 series? This page has more than 200 that fit, such as trailer couplings, electrics and engine parts.

244 parts found for New Holland T6.140
Show:
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
8%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/le...
€33,84 €27,97 €31,13 €25,73
 
Preheating relay 12 volt with plug connection
8%
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection.
€170,59 €140,98 €156,94 €129,70
 
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
8%
Sauermann
Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
 
LED headlight 12/24 V, 203.6 x 413.5 x 225.9 mm, right New Holland
8%
LED headlight 12/24 V, 203.6 x 413.5 x 225.9 mm, right New Holland
Light function: Dipped beam, high beam, floodlight | Form: Rectangular | Voltage...
€267,55 €221,12 €246,15 €203,43
 
Sauermann Lock, complete 390 mm Case IH, New Holland, Steyr
8%
Sauermann
Lock, complete 390 mm Case IH, New Holland, Steyr
€509,47 €421,05 €468,71 €387,37
 
Cobo Headlight right H4, 12 V, built-in New Holland
Cobo
Headlight right H4, 12 V, built-in New Holland
Bulbs included: No | Light function: Dipped beam, full beam | Test mark: ECE | I...
€307,38 €254,03
 
Track rod complete A 1564,5 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
8%
Track rod complete A 1564,5 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1564,5 mm. B: M18 x 1,5 mm. C: 20 mm. D: M18 x 1,5 mm. E: 40 mm.
€924,63 €764,16 €850,66 €703,02
 
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
1%
Scharmüller
Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 k...
€996,85 €823,84 €983,19 €812,56
 
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
5%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.070,65 €884,83 €1.013,17 €837,33
 
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
5%
Scharmüller
K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
 
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
21%
ROCKINGER
Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
 
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
8%
Scharmüller
Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colo...
€269,09 €222,39 €247,56 €204,60
 
Seal kit hydraulic steering New Holland TM115-TM190
8%
Seal kit hydraulic steering New Holland TM115-TM190
€127,94 €105,74 €117,70 €97,28
 
Track rod 446 mm, M32 x 1,5
8%
Track rod 446 mm, M32 x 1,5
A: 446 mm. D: M32 x 1,5 mm. E: 46 mm.
€484,56 €400,46 €445,80 €368,43
 
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
8%
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
Piston Ø: 31,4 mm.
€277,14 €229,04 €254,97 €210,72
 
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
8%
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€225,87 €186,67 €207,80 €171,74
 
Signal transmitter exhaust aftertreatment Maxxum 110-140 Tier 4A
8%
Signal transmitter exhaust aftertreatment Maxxum 110-140 Tier 4A
€470,15 €388,55 €432,54 €357,47
 
Tank cap thread 45 mm
Tank cap thread 45 mm
Version: Thread: 45 mm.
€22,91 €18,94
 
Heating flange Case IH, New Holland
Heating flange Case IH, New Holland
€253,39 €209,41
 
Cork ring compressoras 20,83 x 31,75 x 8,13 mm Ford, New Holland
Cork ring compressoras 20,83 x 31,75 x 8,13 mm Ford, New Holland
Dimensions: Inner Ø 21, Outer Ø 32, Thickness 8 mm.
€2,48 €2,05
 
Air hose inlet manifold inner-Ø 57 / 76 mm, length 94 mm
8%
Air hose inlet manifold inner-Ø 57 / 76 mm, length 94 mm
Inner Ø: 57 / 76 mm. Length: 94 mm.
€69,05 €57,07 €63,53 €52,50
 
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
8%
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
Dimensions: 60 x 75 x 8.5 SL mm.
€33,17 €27,41 €30,52 €25,22
 
Mirror 305 x 215 mm, heated, 12 V, left, rod Ø 16 - 22 mm
8%
Mirror 305 x 215 mm, heated, 12 V, left, rod Ø 16 - 22 mm
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heated. Operat...
€200,38 €165,60 €184,35 €152,36
 
Mirror 145 x 195 mm for trailer hitch
Mirror 145 x 195 mm for trailer hitch
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. Additional information:...
€45,96 €37,99
 
Mirror 145 x 195 mm Case IH, New Holland
8%
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
 
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
12%
Scharmüller
Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€952,66 €787,32 €835,29 €690,32
 
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
23%
ROCKINGER
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.504,05 €1.243,02 €1.158,85 €957,72
 
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
23%
ROCKINGER
Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
Colour: Black. Description: Entire coupling body and bearing forged, Easy height...
€1.126,27 €930,80 €867,77 €717,17
 
Spiegelarm left Case IH, New Holland
8%
Spiegelarm left Case IH, New Holland
€192,61 €159,18 €177,20 €146,45
 
Wiper motor windshield Case IH, New Holland
8%
Wiper motor windshield Case IH, New Holland
€313,64 €259,21 €288,55 €238,47
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
21%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
 
Sensor driving speed rear axle, connection cable with plug
8%
Sensor driving speed rear axle, connection cable with plug
Version: Driving speed sensor (rear axle housing), Connection cable with plug.
€124,37 €102,79 €114,42 €94,56
 
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
8%
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutc...
€151,60 €125,29 €139,47 €115,27
 
Push button switch PTO shaft with connection cable and plug
8%
Push button switch PTO shaft with connection cable and plug
Version: Front PTO operation, Connection cable with plug.
€193,40 €159,83 €177,93 €147,05
 
Rocker switch rear lift lifting and lowering
8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering.
€80,49 €66,52 €74,05 €61,20
 
Cobo Indicator/position light oval PY21W, R5W right
8%
Cobo
Indicator/position light oval PY21W, R5W right
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Right. ...
€118,81 €98,19 €109,31 €90,33
 
MANN-FILTER Secondary air filter CF1140/2
MANN-FILTER
Secondary air filter CF1140/2
€55,33 €45,72
 
MAHLE Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
40%
MAHLE
Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
€480,04 €396,73 €287,51 €237,61
 
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
8%
Wabco
Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min...
€1.893,95 €1.565,25 €1.742,43 €1.440,03
 
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
23%
ROCKINGER
Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.088,39 €899,50 €838,59 €693,05
 
Radiator Case IH Maxxum, New Holland T6, Steyr Profi CVT
8%
Radiator Case IH Maxxum, New Holland T6, Steyr Profi CVT
To fit as: Case IH Series Maxxum: Maxxum 110 CVX, Maxxum 120 CVX, Maxxum 130 CVX...
€1.190,03 €983,50 €1.094,83 €904,82
 
Tank cap thread 45 mm, for expansion tank
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
 
AdBlue-feed unit Case IH, Steyr, New Holland
8%
AdBlue-feed unit Case IH, Steyr, New Holland
Description: AdBlue supply units ensure even metering of AdBlue depending on the...
€2.385,67 €1.971,63 €2.194,82 €1.813,90
 
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
Thread: M22 x 1.5.
€14,93 €12,33
 
Air hose intercooler inner-Ø 57 mm, length 90 mm
8%
Air hose intercooler inner-Ø 57 mm, length 90 mm
Inner Ø: 57 mm. Length: 90 mm.
€43,60 €36,03 €40,11 €33,15
 
Fan clutch Case IH, Steyr, New Holland
8%
Fan clutch Case IH, Steyr, New Holland
€505,62 €417,87 €465,17 €384,44
 
Showing 97 - 144 of 244

New Holland T6.140 parts for hitching and towing

On plenty of farms the T6.140 is the tractor that pulls the tipper one day and runs the mower or the slurry tanker the next. The more than 200 parts on this page reflect that. A good share concerns the rear end: drawbars, a Piton Fix, swinging drawbars, top drawbars, adapter plates and drawbar frames, made by GRANIT and by hitch specialists such as Scharmüller, ROCKINGER, Sauermann and Walterscheid.

Switching your T6.140 to a different hitch system usually takes more than the drawbar on its own. A height adjustable adapter plate, a frame that matches the rails on the tractor and sometimes a retrofit kit for a swinging drawbar tend to come with it.

Measure first, then order

With hitch parts, what is already on the tractor decides what fits. Measure the rail width, the pin diameter and the hole pattern of the plate on your old part, and compare them with the description of the new one. Check the type plate of the tractor as well, and look closely at the old part. Cast or stamped reference numbers on a drawbar or frame are worth a lot, even after the paint has gone.

One practical point for drawbars and the Piton Fix: check the locking pin and the catch every time you fit one. A worn locking pin or a safety spring that has lost its tension should be replaced at the same time, because that is where the safety of the whole combination lies.

Cab, electrics and cooling

The front end and the cab of the T6.140 have their share of wear parts too. Think of the push button switch for the front PTO with cable and plug, contact switches for the gearbox, rocker switches, a temperature sensor for the transmission oil and alternators. There are also radiators, mirrors, tank caps and a hydraulic top link.

A hydraulic top link stays tight for longer if you keep the piston rod clean and park it fully retracted. A bright rod that spends months exposed to the weather picks up pitting, and those pits wear out the seal.

The rest of the T6 series

If you also run another T6, use the page for that model, as each type has its own parts list:

The T6.125 and T6.150 belong to the same series. For every other New Holland tractor, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart