Menu
EUR

New Holland T6.150 tractor parts & technical data

From engine parts to electrics and trailer couplings: we have matched more than 200 parts to the New Holland T6.150, all suited to the T6 series.

238 parts found for New Holland T6.150
Show:
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
You save 21%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
You save 18%
GRANIT Sensor power take-off speed, connection cable with plug
GRANIT
Version: PTO shaft (speed), PTO speed, Connection cable with plug. More
Version: PTO shaft (speed), PTO speed, Connection cable with plug.
€90,92 €75,14 €82,25 €67,98
You save 10%
Potentiometer transmission for electronic control unit with connector
Version: For electronic control unit, Connection cable with plug. More
Version: For electronic control unit, Connection cable with plug.
€145,39 €120,16 €138,10 €114,13
You save 5%
Light switch work light, built-in dashboard
Version: Installation: dashboard. More
Version: Installation: dashboard.
€40,37 €33,36 €38,35 €31,69
You save 5%
HELLA Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm.
€18,15 €15,00
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
Scharmüller Drawbar frame 16 kN, rail 200 mm, guide 25 mm, pin Ø 16 mm
Scharmüller
Guide width (mm): 25 | Load capacity (kg): 500 | Colour: Kubota grey | Version: Prepared for drawbar | Detent pin Ø (mm): 16 | Category: Bearing supp... More
Guide width (mm): 25 | Load capacity (kg): 500 | Colour: Kubota grey |...
€769,00 €635,54
Eaton Planetary gear transmission, 994 g
Eaton
Reference no.: 5145497 More
Reference no.: 5145497
€82,40 €68,10 €78,25 €64,67
You save 5%
CARLISLE Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
CARLISLE
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth More
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth
€25,24 €20,86 €23,95 €19,79
You save 5%
GRANIT Alternator 14 V, 120 A, flange 83 mm, Case IH, New Holland, Steyr
GRANIT
Pulley Ø (mm): 61.0 | Direction of rotation: ↻ | Flange size (mm): 83,0 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm): M8 / 86,0 | Addi... More
Pulley Ø (mm): 61.0 | Direction of rotation: ↻ | Flange size (mm): ...
€241,75 €199,79 €229,65 €189,79
You save 5%
Scharmüller Drawbar frame for draw pendulum, rail 330 mm, Dc 55 kN, Kioti gray
Scharmüller
Detent pin Ø (mm): 25 | Version: Prepared for drawbar | Colour: Kioti grey | Load capacity (kg): 2000 | Category: Bearing supports | Guide width (mm)... More
Detent pin Ø (mm): 25 | Version: Prepared for drawbar | Colour: Kioti...
€1.034,55 €855,00
LED work lights spotlight 4400 lm, 56 W, 10 - 30 V, 160 x 100 x 68 mm
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 class 4 | Width (mm): 160 | Theoretical luminous flux (lm): 5320 | Housing materia... More
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 cl...
€76,82 €63,49 €72,95 €60,29
You save 5%
FEBI Multi-rib belt 8 ribs Case IH, Steyr, New Holland
FEBI
To fit as: Case IH More
To fit as: Case IH
€47,53 €39,28 €17,58 €14,53
You save 63%
GRANIT Sealing ring hand brake brake piston 329,6 x 336,4 x 3,4 mm
€60,42 €49,93 €57,35 €47,40
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
€104,75 €86,57 €99,50 €82,23
You save 5%
Radiator Case IH CS, Maxxum, New Holland T6, T6000, Steyr 9100
To fit as: New Holland Serie T6 (T6.120–T6.175, from 2012), Serie T6000 (T6020–T6070 Tier 3, from 2007), Case IH Serie CS (CS 120, 130, 150, years... More
To fit as: New Holland Serie T6 (T6.120–T6.175, from 2012), Serie T6...
€1.218,47 €1.007,00 €1.157,50 €956,61
You save 5%
GRANIT Cork ring compressoras 20,83 x 31,75 x 8,13 mm Ford, New Holland
GRANIT
Dimensions: Inner Ø 21, Outer Ø 32, Thickness 8 mm. More
Dimensions: Inner Ø 21, Outer Ø 32, Thickness 8 mm.
€2,38 €1,97
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
Dimensions: 60 x 75 x 8.5 SL mm. More
Dimensions: 60 x 75 x 8.5 SL mm.
€31,79 €26,27 €30,20 €24,96
You save 5%
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
€72,68 €60,07 €65,75 €54,34
You save 10%
CBM Mechanical top link cat. 3, 647 - 913 mm, M36 x 3
CBM
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm. K: 65 mm. H: 65 mm. Type: Tail hook/clevis joint. Top link type: mechanical. More
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm....
€400,21 €330,75 €380,15 €314,17
You save 5%
Fender bracket left complete Maxxum 115-150, Puma CVX 140-175
€597,24 €493,59 €540,35 €446,57
You save 10%
Scharmüller Drawbar automatic rail width 320 mm, coupling pin 38 mm
Scharmüller
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 89,3 kN. Colour: Black. Descript... More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€1.203,95 €995,00 €1.064,75 €879,96
You save 12%
Showing 73 - 96 of 238

New Holland T6.150 parts for hitching, electrics and cooling

On a New Holland T6.150 that spends its days pulling trailers and implements, the rear end takes the hardest knocks. A worn hitch jaw, a locking pin with play or a drawbar that rattles in its guide makes every coupling job slower. This page brings together more than 200 replacement parts that fit the T6.150, from makers such as GRANIT, Scharmüller, ROCKINGER, Sauermann and Walterscheid.

What you can get for this tractor

For towing there are automatic drawbar hitches, Piton Fix systems for a fixed towing pin, a drawbar retrofit kit, top hitches, height adjustable adapter plates and complete hitch frames. If you want to set the three-point linkage from the seat, a hydraulic top link is worth a look. On the electrical side you will find a transmission oil temperature sensor, gearbox contact switches, a front PTO push button switch with cable and plug, rocker switches and an alternator. Radiators, mirrors and fuel tank caps complete the picture.

Measure before you order

Whether a hitch or a Piton Fix rail fits depends on the frame already on the tractor. Measure the rail width, the pin diameter and the guide, then compare them with the details on the product page. For sensors and switches, the reference number on the old part is the quickest route. You will usually find it on the housing or close to the plug. If you are unsure which version of the tractor you have, check its type plate.

A note on radiators

A T6.150 running hot in summer rarely has a leaking radiator. Chaff, dust and pollen pack into the fins, especially at harvest. Blow the core out with compressed air from the inside outwards and keep the nozzle straight so the fins stay upright. If the temperature still climbs afterwards, a new radiator makes sense. When you fit one, refill with fresh coolant and check every hose clamp.

Looking after the hitch

A Piton Fix pin spends its life under heavy load. Check the locking pin and the guide for scoring and wear every so often, and give the sliding faces a thin coat of grease. A worn pin lets the hook rattle in its rail, and over time the rail itself takes the damage. Do the same check on the drawbar holes before they wear oval.

Other T6 models

Running more than one T6? Each neighbouring model has its own page that shows only the parts for that tractor:

Every other tractor from the brand is listed under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart