Menu
EUR

New Holland T6.175 tractor parts & technical data

Servicing the steering, swapping a trailer coupling or chasing an electrics fault on a New Holland T6.175? More than 200 parts for this T6 are listed here.

245 parts found for New Holland T6.175
Show:
GRANIT Drive shaft 1115 mm Case IH, New Holland, Steyr
GRANIT
Length (mm): 1115 More
Length (mm): 1115
€530,44 €438,38 €503,90 €416,45
You save 5%
DANA Spicer Synchro unit, complete 12 x 12 tray 1ste / 2de Case IH, New Holland
€529,33 €437,46 €502,85 €415,58
You save 5%
GRANIT Hydraulic top link cat. 3 - 28, 740 / 920 mm, stroke 180 mm
GRANIT
Tensile force (t): 6 | Check valve: at side | Stroke (mm): 180 | Adjustable: No | Lifting force (t): 11 | B cat.: 28 | Cylinder Ø inner E (mm): 90 | ... More
Tensile force (t): 6 | Check valve: at side | Stroke (mm): 180 | Adjus...
€894,49 €739,25 €849,75 €702,27
You save 5%
Scharmüller Drawbar 526 mm, 50 x 30 mm, pin 31,5 mm, position 2
Scharmüller
Colour: Kubota grey | Width (mm): 50 | Category: Drawbar | Lock: Pin | Trailer load (kg): 5000 | Height (mm): 30 | Version: Standard | Pin Ø (mm): 31... More
Colour: Kubota grey | Width (mm): 50 | Category: Drawbar | Lock: Pin |...
€324,75 €268,39
Scharmüller Drawbar frame 10 kN, rail 200 mm, guide 25 mm, pin Ø 16 mm
Scharmüller
Detent pin Ø (mm): 16 | Category: Bearing supports | Load capacity (kg): 295 | Guide width (mm): 25 | Rail width (mm): 200 | Colour: Kubota grey | Ve... More
Detent pin Ø (mm): 16 | Category: Bearing supports | Load capacity (k...
€936,85 €774,26
Connector head M16 x 1,5 red, supply line, vehicle
Application: Vehicle | Connection thread: M16 x 1.5 | Version: Red, supply line | Menke no.: 55927 | Additional information: - For dual-line brake sys... More
Application: Vehicle | Connection thread: M16 x 1.5 | Version: Red, su...
€23,80 €19,67
Sauermann Wear plate trailer coupling HS 1710-1KUD/3KUD
€172,30 €142,40 €163,65 €135,25
You save 5%
Sauermann Hitch handle complete for 87 mm brede geleidehuls
Sauermann
Description: For 87 mm wide saddle sleeve, new version | Reference no.: 84364249 More
Description: For 87 mm wide saddle sleeve, new version | Reference no....
€370,50 €306,20 €351,95 €290,87
You save 5%
SANDEN Aircon compressor 12 V, Ø 112 mm, 4 grooves Case IH, New Holland, Steyr
SANDEN
Oil quantity (ccm): 200 | Suitable oil: SP 10 | Additional information: incl. O-ring seal | Fixing: DM | No. of grooves: 4 | Pulley Ø (mm): 112 | Ref... More
Oil quantity (ccm): 200 | Suitable oil: SP 10 | Additional information...
€655,35 €541,61 €622,55 €514,50
You save 5%
FEBI Temperature sensor -40 up to 850 °C, curved, length 50 mm
FEBI
Version: -40 to 850°C More
Version: -40 to 850°C
€172,44 €142,51 €68,45 €56,57
You save 60%
FEBI Engine oil filter LF16117
€32,61 €26,95 €20,58 €17,01
You save 37%
Cylinder hydraulic steering Case IH, New Holland
€946,53 €782,26 €899,20 €743,14
You save 5%
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
LUK
Number of teeth: 16. Tooth profile: 31X35. More
Number of teeth: 16. Tooth profile: 31X35.
€551,15 €455,50 €523,55 €432,69
You save 5%
GRANIT Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
GRANIT
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm. More
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€216,46 €178,89 €205,60 €169,92
You save 5%
Signal transmitter exhaust aftertreatment Maxxum 110-140 Tier 4A
€450,56 €372,36 €428,00 €353,72
You save 5%
Borg Warner Fan clutch Ford, Case IH, Steyr, New Holland
€329,00 €271,90 €288,75 €238,64
You save 12%
GRANIT Tank cap Case IH, New Holland, Steyr
€43,20 €35,70 €41,00 €33,88
You save 5%
GRANIT Fan clutch Case IH, Steyr, New Holland
€484,54 €400,45 €460,30 €380,41
You save 5%
GRANIT Urea filter AdBlue Case IH, New Holland
GRANIT
MANN no.: U630xKIT. Fleetguard no.: UK176. Hifi no.: SD70318. Hengst no.: E100UD160. More
MANN no.: U630xKIT. Fleetguard no.: UK176. Hifi no.: SD70318. Hengst n...
€33,43 €27,63 €31,75 €26,24
You save 5%
GRANIT Mirror 145 x 195 mm Case IH, New Holland
GRANIT
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€55,61 €45,96 €52,80 €43,64
You save 5%
Base plate fender pin Ø 25 mm Case IH, New Holland
€118,52 €97,95 €112,55 €93,02
You save 5%
Scharmüller Drawbar manual rail width 330 mm, coupling pin 31 mm, 82,4 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€637,08 €526,51 €563,40 €465,62
You save 12%
GRANIT Spiegelarm left Case IH, New Holland
€184,59 €152,55 €175,35 €144,92
You save 5%
Showing 145 - 168 of 245

New Holland T6.175 parts for the hitch, cooling and cab

A T6.175 tends to spend long days in front of a trailer, a bale cart or a slurry tanker. That kind of work shows up first at the coupling point and in the cooling system, and both areas are well covered here. More than 200 parts on this page fit this tractor, from a complete drawbar down to a tank cap.

Hitching and towing

For the rear end there are automatic drawbars, drawbar frames, Piton Fix rails, a top drawbar for the upper coupling point and a drawbar retrofit kit. Height adjustable adapter plates let you set the coupling height to suit the implement or trailer. Alongside the GRANIT range, these parts come from Scharmüller, ROCKINGER, Sauermann and Walterscheid.

A workshop habit worth keeping: every time you grease the hitch, look at the locking pin on the Piton Fix or the automatic drawbar. If the pin shows a lip or a shiny worn patch, it no longer locks fully home and the hook starts to knock under load. Replace the pin or the whole unit before the guide in the rail itself wears out, because that turns a small job into a big one.

Cooling, electrics and cab

  • Radiators and a fan clutch
  • Temperature sensors, such as the one for the transmission oil
  • Contact switches, including the gearbox status switch
  • Push button switches, for example for the front PTO
  • Mirrors, gas struts and tank caps

If the engine runs hot during heavy draft work, check the fan clutch first. When the engine is warm and switched off and you can stop the fan easily by hand, the clutch is slipping and the radiator is not getting enough air. Always blow the radiator out from the engine side, otherwise you just push dust and chaff deeper into the fins.

Matching the right part to your T6.175

Start with the type plate so you know for certain it is a T6.175 and not a neighbouring model with a near identical name. Sensors and switches usually carry a reference number on the old part, which you can compare with the numbers shown for the products on this page. For drawbars and adapter plates, the rail width and hole pattern of what is fitted now decide what will fit.

Other tractors in the T6 range

Each T6 model has its own page showing only the parts that fit that tractor, which helps when there is more than one New Holland in the yard: the New Holland T6.180, New Holland T6.165, New Holland T6.160, New Holland T6.155, New Holland T6.145 and New Holland T6.140. Check fitment for each model separately, even when two tractors look alike. The full brand range is under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart