Menu
EUR

New Holland T7.170 tractor parts & technical data

Trailer couplings, electrics and engine parts for the New Holland T7.170: more than 300 parts that fit this tractor from the T7 series, on one clear page.

305 parts found for New Holland T7.170
Show:
Cylinder hydraulic steering Case IH, New Holland
€603,54 €498,79 €555,26 €458,89
You save 8%
LUK Torsion damper PTO shaft 8 teeth, 31,9 x 35
LUK
Number of teeth: 8. Tooth profile: 31.9x35. More
Number of teeth: 8. Tooth profile: 31.9x35.
€267,68 €221,22 €246,27 €203,53
You save 8%
Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€284,35 €235,00 €261,60 €216,20
You save 8%
Dayco V-belt air conditioning 990 mm, 4 ribs Case IH, Steyr, New Holland
Dayco
Length: 990 mm. Ribs: 4 n. More
Length: 990 mm. Ribs: 4 n.
€32,29 €26,68
Heating element Case IH, New Holland
€274,29 €226,69 €252,35 €208,55
You save 8%
V-belt 27,92 x 1536,7 mm, 8 ribs New Holland, Case IH
Width: 27,92 mm. Reference no.: S.149072. Ribs: 8 n. Belt length: 1536,7 mm. More
Width: 27,92 mm. Reference no.: S.149072. Ribs: 8 n. Belt length: 1536...
€46,49 €38,42 €42,77 €35,35
You save 8%
Air hose intercooler Ø 57 mm Case IH, Steyr, New Holland
€34,20 €28,26 €31,46 €26,00
You save 8%
Thermostat Ø 60,5 mm, 81 °C Case IH, Steyr, New Holland
Ø: 60,5 mm. Temperature: 81 °C. More
Ø: 60,5 mm. Temperature: 81 °C.
€42,93 €35,48 €39,50 €32,64
You save 8%
V-belt for air conditioning 990 mm, 4 ribs
Length: 990 mm. Reference no.: S.149086. Ribs: 4 n. Version: For air conditioning system. Description: For air conditioning system. More
Length: 990 mm. Reference no.: S.149086. Ribs: 4 n. Version: For air c...
€24,93 €20,60
Feed pump Landini Powermaster, Powermax, series 6, series 7
€481,09 €397,60 €442,60 €365,79
You save 8%
Temperature sensor -40 up to 850 °C, curved, 50 mm, with resistor
Description: Oxidation catalyst. Version: -40 to 850°C. More
Description: Oxidation catalyst. Version: -40 to 850°C.
€117,72 €97,29 €108,30 €89,51
You save 8%
Valve cover gasket upper thickness 10,5 mm Case IH, Steyr, New Holland
€34,28 €28,33 €31,54 €26,06
You save 8%
Cylinder head gasket Case IH, Steyr, New Holland
€130,80 €108,10 €120,34 €99,45
You save 8%
Cylinder head gasket Case IH, Steyr, New Holland
€125,91 €104,06 €115,84 €95,73
You save 8%
High-pressure pump diesel Case IH, Steyr, New Holland
€1.099,86 €908,98 €1.011,87 €836,26
You save 8%
Belt kit 1683 mm, 8 ribs Case IH, Steyr, New Holland
Contents: Belt, belt tensioner, tensioning pulley. Belt length: 1683 mm. Ribs: 8 n. More
Contents: Belt, belt tensioner, tensioning pulley. Belt length: 1683 m...
€135,87 €112,29 €125,00 €103,31
You save 8%
Belt kit air conditioning 4 ribs, 990 mm
Version: For air conditioning system. Contents: Belt, belt tensioner. Belt length: 990 mm. Ribs: 4 n. More
Version: For air conditioning system. Contents: Belt, belt tensioner. ...
€207,98 €171,88 €191,34 €158,13
You save 8%
Belt kit main belt drive 8 ribs, 1537 mm
Version: For main belt drive. Contents: Belt, belt tensioner, idler pulley. Belt length: 1537 mm. Ribs: 8 n. More
Version: For main belt drive. Contents: Belt, belt tensioner, idler pu...
€294,50 €243,39 €270,94 €223,92
You save 8%
Belt kit 1537 mm, 8 ribs, belt tensioner
Version: For main belt drive. Contents: Belt, belt tensioner. Belt length: 1537 mm. Ribs: 8 n. More
Version: For main belt drive. Contents: Belt, belt tensioner. Belt len...
€328,47 €271,46 €302,19 €249,75
You save 8%
Bosch/Rexroth Hydraulic pump clockwise 45 cm³/rpm. Case IH, Steyr, New Holland
Bosch/Rexroth
Output volume: 45 cc/rev. Direction of rotation: Right. More
Output volume: 45 cc/rev. Direction of rotation: Right.
€3.524,33 €2.912,67 €3.242,38 €2.679,66
You save 8%
Replacement key
€10,41 €8,61
Mirror glass heated right / left 310 x 223 mm, 12 V
Dimensions: 310 x 223 mm. Version: Can be heated. Installation location: Right/left. Volts: 12. Radius of curvature: 2000 mm. More
Dimensions: 310 x 223 mm. Version: Can be heated. Installation locatio...
€119,95 €99,13 €110,35 €91,20
You save 8%
Lift rod clevis/clevis, 620 mm, stroke 170 mm New Holland
Type: Clevis joint/clevis joint. A: 25,4 mm. B: 25,4 mm. L: 620 mm. C: 40 mm. D: 90 mm. Stroke: 170 mm. suitable for: New Holland. Length: 620 mm. More
Type: Clevis joint/clevis joint. A: 25,4 mm. B: 25,4 mm. L: 620 mm. C:...
€650,95 €537,98 €598,87 €494,94
You save 8%
CBM Mechanical top link cat. 3, 647 - 913 mm, M36 x 3
CBM
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm. K: 65 mm. H: 65 mm. Type: Tail hook/clevis joint. Top link type: mechanical. More
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm....
€417,62 €345,14 €384,21 €317,53
You save 8%
Fender bracket left complete Maxxum 115-150, Puma CVX 140-175
€593,54 €490,53 €546,06 €451,29
You save 8%
Spring right fender Case IH, Steyr, New Holland
€52,24 €43,17 €48,06 €39,72
You save 8%
Lift arm left, 710 - 845 mm, eye-Ø 25 mm New Holland, Case IH
€518,97 €428,90 €477,45 €394,59
You save 8%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.405,31 €1.161,41 €1.082,77 €894,85
You save 23%
Cylinder New Holland T7, Case IH Puma, Steyr CVT
€527,33 €435,81 €485,14 €400,95
You save 8%
Cylinder New Holland T7, T6000
€508,60 €420,33 €467,91 €386,70
You save 8%
Oil pressure switch steering, 2 blade connections
Version: 2 blade terminals, Also suitable for: four-wheel drive, power shuttle and differential lock. More
Version: 2 blade terminals, Also suitable for: four-wheel drive, power...
€81,29 €67,18 €74,79 €61,81
You save 8%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€116,92 €96,63 €107,57 €88,90
You save 8%
Sensor transmission PTO shaft, connection cable with plug, 3-pin
Version: For PTO shaft, connection cable with plug connection, 3-pin. More
Version: For PTO shaft, connection cable with plug connection, 3-pin.
€93,56 €77,32 €86,08 €71,14
You save 8%
Rotary switch fan 4-stage, without knob, 6 connections
Version: For blower, 4-speed, 6 blade terminals. More
Version: For blower, 4-speed, 6 blade terminals.
€114,89 €94,95 €105,70 €87,35
You save 8%
Starter switch without key, connection cable with plug
Version: Connection cable with plug, Key 50717018. More
Version: Connection cable with plug, Key 50717018.
€101,02 €83,49 €92,94 €76,81
You save 8%
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 149 mm. Total height: 285 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€89,72 €74,15 €82,54 €68,22
You save 8%
Compressed air sensor M12 x 1,5 Case IH, New Holland
Connection: M12 x 1,5. More
Connection: M12 x 1,5.
€278,47 €230,14
PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125042. More
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125...
€343,68 €284,03 €316,19 €261,31
You save 8%
PTO shaft end piece 182,5 mm, 1 3/8 inch 6 grooves, 540 rpm.
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm. More
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm.
€354,81 €293,23 €326,43 €269,77
You save 8%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.732,20 €1.431,57
Dayco Multi-rib belt Powerband 8 ribs, 1560 mm Case IH, Steyr, New Holland
Dayco
Length: 1560 mm. Ribs: 8 n. Catalogue: <a class="link link--icon entdecken-productDetails__onlineCatalogLink" href="//okat.granit-parts.com/index.php?... More
Length: 1560 mm. Ribs: 8 n. Catalogue: <a class="link link--icon entde...
€58,28 €48,17 €53,62 €44,31
You save 8%
Dayco Multi-rib belt Powerband air brake system 4 ribs, 1083 mm
Dayco
Length: 1083 mm. Ribs: 4 n. More
Length: 1083 mm. Ribs: 4 n.
€35,68 €29,48
Borg Warner Cooling fan Ø 550 mm Case IH, Steyr, New Holland
€151,14 €124,91 €144,47 €119,39
You save 4%
Showing 193 - 240 of 305

New Holland T7.170 parts for the hitch, engine and cab

A New Holland T7.170 rarely works without something on the back, be it a tipping trailer, a slurry tanker or a bale trailer. That is where wear shows up first: a worn pin, play in the slide rail or a latch that no longer locks cleanly. This page lists more than 300 parts matched to the T7.170, from the hitch system to the alternator and the cab mirrors.

Hitching: drawbars, Piton Fix and adapter plates

For the rear hitch there are automatic drawbars, complete drawbar frames, top drawbars and Piton Fix rails. With Piton Fix you slide a ball hitch, a swinging drawbar or a clevis into the same rail and secure it with a locking pin. Height adjustable adapter plates bring the hitch to the right height for the trailer drawbar. These components come from hitch specialists such as Scharmüller, ROCKINGER, Sauermann and Walterscheid. If you run a steered trailer, parts for forced steering are here as well.

A workshop tip: give the guide and locking pin of a Piton Fix rail a thin coat of grease every so often and check the pin for wear marks. Once it stops dropping fully into its hole, the hitch knocks in the rail under load and the rail itself starts to wear faster.

Engine and electrics

On the engine side you will find alternators, multi-rib belts and belt kits with tensioner and idler pulley, oil pressure switches, sensors and intercooler air hoses. When you replace the belt, look at the tensioner at the same time. A rough or loose tensioner pulley soon ruins a new belt. A split intercooler hose often gives itself away with a hiss under load and a tractor that pulls noticeably weaker. If the oil pressure warning comes on, check the oil level and measure the pressure with a gauge before you change the switch.

Alongside these there are hydraulic cylinders, cab mirrors and tank caps, with GRANIT covering everyday wear and service items.

Matching the right part to your T7.170

The quickest route is the old part itself. An alternator, sensor or cylinder nearly always carries a reference number, stamped in or on a label, and that number lets you check a replacement quickly. The type plate on the tractor confirms you are working on a T7.170 from the T7 series. For drawbars and adapter plates, the hole pattern and rail width on your tractor decide what fits.

Other tractors in the T7 series

If another T7 shares the yard with your T7.170, it has its own parts page: New Holland T7.200, New Holland T7.210, New Holland T7.220, New Holland T7.230, New Holland T7.245 and New Holland T7.260. Check the fit tractor by tractor, since details differ even within one series. Every other model from the brand is collected under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart