Menu
EUR

New Holland T7.190 tractor parts & technical data

From engine parts to electrics and trailer couplings, more than 200 items on this page fit the New Holland T7.190 from the T7 Series, sorted by product group.

235 parts found for New Holland T7.190
Show:
HELLA Alternator 14 V, 120 A, pulley Ø 61 mm, 8 grooves
HELLA
Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charging current (A): 120 | Nominal voltage (V): 14 | Additional information: With V-ribbed bel... More
Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charging curren...
€510,66 €422,03 €410,55 €339,30
You save 20%
GRANIT Hand brake cable 1160 mm Case IH Puma 115-215, New Holland T7030-T7060
GRANIT
Length: 1160 mm. Dimensions: Length = 1160 mm. More
Length: 1160 mm. Dimensions: Length = 1160 mm.
€102,61 €84,80 €97,45 €80,54
You save 5%
GRANIT Bevel gear differential drive 13 teeth Fiat, New Holland
GRANIT
Number of teeth: 13. More
Number of teeth: 13.
€32,21 €26,62 €30,55 €25,25
You save 5%
PTO shaft end piece 182,5 mm, 1 3/8 inch 6 grooves, 540 rpm.
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm. More
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm.
€340,02 €281,01 €323,00 €266,94
You save 5%
Borg Warner Cooling fan Ø 550 mm Case IH, Steyr, New Holland
€144,45 €119,38
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€56,70 €46,86 €53,85 €44,50
You save 5%
NOX sensor at catalytic output, 5-pin, 915 mm
To fit: Case IH, New Holland, Steyr. Installation location: At the catalytic converter outlet. Cable length: 915 mm. More
To fit: Case IH, New Holland, Steyr. Installation location: At the cat...
€449,33 €371,35 €426,85 €352,77
You save 5%
GRANIT Cylinder head gasket 1,43 mm, engine 8035.02, 8035.06 Fiat, New Holland
€22,20 €18,35
GRANIT Air hose intercooler inner-Ø 65 / 75 mm, length 98 mm
GRANIT
Inner Ø: 65 / 75 mm. Length: 98 mm. More
Inner Ø: 65 / 75 mm. Length: 98 mm.
€67,49 €55,78 €64,10 €52,98
You save 5%
Crankshaft seal for Case IH, Steyr, New Holland
€34,58 €28,58 €32,85 €27,15
You save 5%
Ball joint ball-Ø 19 mm Case IH, Fiat, New Holland
Dimensions: Ball Ø = 19 mm. More
Dimensions: Ball Ø = 19 mm.
€47,82 €39,52 €45,40 €37,52
You save 5%
Rear-view mirror 487 x 228 x 130 mm, heated, 12 V, right
Dimensions: 487 x 228 x 130 mm. Height: 130 mm. Width: 228 mm. Length: 487 mm. Radius of curvature: 1200 / 300 mm. Version: Heated. Operating voltage:... More
Dimensions: 487 x 228 x 130 mm. Height: 130 mm. Width: 228 mm. Length:...
€299,46 €247,49 €270,90 €223,88
You save 10%
Pivot right Case IH, New Holland, Steyr
€512,92 €423,90 €487,25 €402,69
You save 5%
GRANIT Pivot left Case IH, New Holland, Steyr
€545,52 €450,84 €518,20 €428,26
You save 5%
Sauermann Bolt lock complete trailer coupling HS 1710-1KUD/3KUD
€339,99 €280,98 €307,60 €254,21
You save 10%
Pressure switch air conditioning with female thread, plug connection, on de line
Version: With female thread, Plug connection, Mounted on the line. More
Version: With female thread, Plug connection, Mounted on the line.
€89,92 €74,31 €85,40 €70,58
You save 5%
Showing 217 - 235 of 235

New Holland T7.190 parts

The New Holland T7.190 relies on a set of temperature sensors to keep track of fuel, coolant and transmission oil. This page holds more than 200 parts for the T7.190, and those sensors sit right next to the cooling fans that react to them, the NOX sensors in the exhaust, alternators and a torsion damper.

Before you blame the sensor

A high temperature warning does not always mean a failed sensor. Check the coolant level first, then the radiator pack. Chaff, dust and pollen pack in between the coolers, and once that happens even a healthy cooling fan cannot keep up. Blow the pack out from the inside towards the outside, against the normal airflow. Next, look at the sensor plug for green corrosion. When you do replace a sensor, fit a new sealing ring and do not overtighten it in the housing.

The torsion damper sits between the engine and the driveline. A rattle at idle that fades as soon as you open the throttle is a classic reason to inspect it.

Hitching and towing

The rear end of a T7.190 works hard, and this page covers it with parts from Scharmüller, ROCKINGER, Sauermann and GRANIT:

  • automatic drawbars and drawbar frames
  • Piton Fix hooks and adapter plates
  • drawbars for the linkage and an automatic hitch
  • cylinders

Mirrors and tank caps complete the picture, and FEBI also supplies a few items. Measure the rail width and the locking pin on your tractor before ordering any hitch part.

Getting the right fit

Start with the rating plate to be sure the machine really is a T7.190. Sensors and cylinders nearly always carry a reference number on the housing. Note it down and compare it with the parts on this page.

A cracked mirror on the road is more than a cosmetic issue. Replace it promptly and check while you are at it that the arm is tight and does not shake on the move. The same goes for a tank cap whose seal has gone hard, because dirt and water in the diesel cause far costlier trouble than a new cap.

The rest of the T7 series

Other tractors in the T7 series each have their own page, so you only see what fits that type: New Holland T7.170, New Holland T7.200, New Holland T7.210, New Holland T7.220, New Holland T7.230 and New Holland T7.245. A New Holland from outside the T7 line can be traced through New Holland parts instead.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart