Menu
EUR

New Holland T7.260 tractor parts & technical data

Working on a New Holland T7.260? This page brings together more than 300 parts that fit, including trailer couplings, electrics, steering and front axle parts.

313 parts found for New Holland T7.260
Show:
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€758,99 €627,26 €639,25 €528,31
You save 16%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€22,55 €18,64
CARLISLE External plate 1,5 mm, inner 99 mm, outer 152 mm
CARLISLE
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm More
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm
€33,81 €27,94 €32,10 €26,53
You save 5%
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
CARLISLE
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm More
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
You save 5%
SANDEN Aircon compressor 12 V, Ø 119 mm, 10 grooves, 200 ccm
SANDEN
Nominal voltage (V): 12 | Refrigerant: R 134a | Oil quantity (ccm): 200 | Suitable oil: SP 10 | Fixing: DM | Pulley Ø (mm): 119 | No. of grooves: 10 More
Nominal voltage (V): 12 | Refrigerant: R 134a | Oil quantity (ccm): 20...
€636,30 €525,87 €604,45 €499,55
You save 5%
Compressed air sensor M12 x 1,5 Case IH, New Holland
Connection: M12 x 1,5. More
Connection: M12 x 1,5.
€278,45 €230,12
GRANIT Brake disc Ø 328 mm, thickness 9,6 mm, 14 teeth
€165,65 €136,90 €157,35 €130,04
You save 5%
Brake piston Ø 245 x 400 x 29 mm Case IH, New Holland
€318,35 €263,10 €302,40 €249,92
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
Scharmüller Drawbar bracket 200 x 100 mm, bore M20, inner width 124 mm, black
Scharmüller
suitable for: New Holland. Series: T7 SWB (Tier 5). Category: Drawbar. Version: Brackets. Colour: Black. Hole: M20 mm. Internal width: 124 mm. Hole pa... More
suitable for: New Holland. Series: T7 SWB (Tier 5). Category: Drawbar....
€260,51 €215,30
GRANIT Silencer with afzuiging Case IH, New Holland
€666,64 €550,94 €633,30 €523,39
You save 5%
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm. More
Ø: 98.59 x 88.27 x 5.16 mm.
€4,24 €3,50
GRANIT Pulley engine cooling Ø 75 mm with bolt Case IH, Steyr, New Holland
€82,18 €67,92 €78,00 €64,46
You save 5%
GRANIT Cooling fan Ø 620 mm, 9 vanes Case IH, New Holland, Steyr
GRANIT
Ø: 620 mm. Notes: 9 Flügel. More
Ø: 620 mm. Notes: 9 Flügel.
€145,89 €120,57 €138,55 €114,50
You save 5%
GRANIT V-belt tensioner Ø 78,5 mm, width 38,5 mm
GRANIT
Outer Ø: 78,5 mm. Width: 38,5 mm. More
Outer Ø: 78,5 mm. Width: 38,5 mm.
€191,64 €158,38 €182,00 €150,41
You save 5%
GRANIT Water pump Case IH Maxxum 110-150, Puma 115-240, Vestrum 100-130
GRANIT
Description: With Tier 4A/B and Stage V machines, note the engine type.. More
Description: With Tier 4A/B and Stage V machines, note the engine type...
€113,63 €93,91 €107,90 €89,17
You save 5%
GRANIT Tank cap Case IH, New Holland, Steyr
€43,20 €35,70 €41,00 €33,88
You save 5%
GRANIT Ammonia sensor exhaust gas NH3, 8-pin, 1.000 mm
GRANIT
Description: Model year 07/17 ->. More
Description: Model year 07/17 ->.
€824,16 €681,12 €782,95 €647,07
You save 5%
GRANIT Metering unit with 3 fixing points Case IH, New Holland, Landini
€164,35 €135,83 €156,10 €129,01
You save 5%
GRANIT Cylinder head gasket Case IH, Steyr, New Holland
€125,34 €103,59 €119,00 €98,35
You save 5%
Exhaust manifold gasket engine F4C Case IH, New Holland, Steyr
Description: Fits T 6020, 6040, 6060. More
Description: Fits T 6020, 6040, 6060.
€6,90 €5,70
Showing 169 - 192 of 313

New Holland T7.260 parts: sensors, hitches and cab

On a modern tractor like the New Holland T7.260, one sensor sending a wrong value can put the engine into limp mode. You end up parked at the headland with a full trailer while the rest of the machine is perfectly fine. This page lists more than 300 parts for the T7.260, from small sensors to heavy drawbars. They come from GRANIT and from makers such as Scharmüller, ROCKINGER, Sauermann and Walterscheid.

Sensors and engine monitoring

To keep an eye on engine and driveline there are temperature sensors, a transmission oil temperature sensor, oil pressure switches and NOX sensors for the exhaust aftertreatment. Alternators are here as well, since low system voltage can itself trigger sensor faults.

Before replacing a NOX sensor, read the fault code first and then inspect the plug and wiring. Moisture or corrosion in the connector, or a cable that has been resting on the exhaust, gives the same message as a failed sensor. If the sensor really has gone, fit the new one with a clean, dry connector and clear the stored fault codes afterwards.

At the back of the tractor

For draft work there are drawbars, drawbar frames, adapter plates, Piton Fix couplings, automatic hitches and top drawbars. For trailers with a steered axle there is forced steering. Every time you hitch up, check that the locking pin has dropped fully into the rail before you drive off. A half-locked pin is one of the few hitch faults you will not hear, but you will certainly notice when it goes wrong.

Cab and fuel tank

For the operator there are air suspended tractor seats, and for visibility there are mirrors, including one that also fits Case IH. A lockable tank cap rounds things off.

Choosing the right part for a T7.260

The T7.260 is part of the New Holland T7 series. The type plate shows the exact model and serial number, which is your first check. Sensors usually carry a reference number on the housing or label. For coupling parts, measure the rail width and pin diameter of what is fitted now. If everything matches the product description, the part will fit.

If you run more than one T7, each model has its own page:

The T7.190 and T7.315 are in this series too. Every other model is under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart