Menu
EUR

New Holland T7550 tractor parts & technical data

Not sure if a part fits your New Holland T7550? This page only shows parts for this model: more than 200, such as trailer couplings, electrics and lighting.

252 parts found for New Holland T7550
Show:
Valve seat outlet valve engine Sisu 320, 420, 620
€75,91 €62,74 €69,84 €57,72
You save 8%
Air hose to the intercooler Case IH, New Holland, Steyr
€207,58 €171,55 €190,97 €157,83
You save 8%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
LED headlight 12/24 V, 203.6 x 413.5 x 225.9 mm, right New Holland
Light function: Dipped beam, high beam, floodlight | Form: Rectangular | Voltage range (V): 9 - 32 | Nominal voltage (V): 12 / 24 | Dimensions W x H x... More
Light function: Dipped beam, high beam, floodlight | Form: Rectangular...
€267,55 €221,12 €246,15 €203,43
You save 8%
HELLA Rückfahrwarner 12 / 24 V, 97 dB, 1200 Hz Case IH, New Holland
€124,12 €102,58 €119,53 €98,78
You save 4%
Pressure switch 1 bar transmission filter Case IH, New Holland, Steyr
Version: 1 bar, transmission filter contamination indicator More
Version: 1 bar, transmission filter contamination indicator
€218,30 €180,41
Cobo Headlight right H4, 12 V, built-in New Holland
Cobo
Bulbs included: No | Light function: Dipped beam, full beam | Test mark: ECE | Installation location: Right | Bulb: 12V60/55W / H4 12V4WK / T4W 12V21W... More
Bulbs included: No | Light function: Dipped beam, full beam | Test mar...
€307,38 €254,03
Master brake cylinder Case IH, Steyr, New Holland
Reference no.: 133135155, 133135418. More
Reference no.: 133135155, 133135418.
€140,19 €115,86 €128,97 €106,59
You save 8%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€996,85 €823,84 €983,19 €812,56
You save 1%
Air hose to the intercooler Case IH, New Holland, Steyr
€200,51 €165,71 €184,47 €152,45
You save 8%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.070,65 €884,83 €1.013,17 €837,33
You save 5%
Tank sender fuel gauge CVX 120-195, 1135-1195
Version: Fuel gauge. More
Version: Fuel gauge.
€309,36 €255,67 €284,61 €235,22
You save 8%
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
Rocker switch dashboard engine speed, differential for
Version: Dashboard Control panel Instrument panel Cab roof Engine speed reduction Front linkage Front differential Heater, ventilation and air conditi... More
Version: Dashboard Control panel Instrument panel Cab roof Engine spee...
€51,40 €42,48 €47,29 €39,08
You save 8%
Bush bridge body Ø 135 x 125 mm, length 42 mm
€75,16 €62,12 €69,15 €57,15
You save 8%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °.
€88,07 €72,79 €81,02 €66,96
You save 8%
Ball joint 263 mm, taper 23,5 - 26,5 mm, M20 x 1,5 / M24 x 1,5
A: 263 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 263 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€80,00 €66,12 €73,60 €60,83
You save 8%
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
€277,14 €229,04 €254,97 €210,72
You save 8%
Valve cover gasket engine Sisu 620 Case IH, New Holland, Steyr
€61,19 €50,57 €56,29 €46,52
You save 8%
Metering unit injection pump Case IH, New Holland, Steyr
€239,24 €197,72 €220,10 €181,90
You save 8%
Gas strut rear window 200 N, 490 mm, ball socket 8 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear screen. Form: 2. Menke no.: 54800. More
Newtons: 200. A: 490 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear scr...
€33,16 €27,41 €30,51 €25,21
You save 8%
Spring right / left fender Case IH, New Holland, Steyr
€45,96 €37,98 €42,28 €34,94
You save 8%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
HELLA Work lamp flood beam H9, 12 V, 65 W, square, upright
HELLA
Bulb: H9. Form: Square. Nominal voltage: 12 V. Type: Ultra Beam H9. Power consumption: 65 W. Light function: Close-range illumination. Bulbs included:... More
Bulb: H9. Form: Square. Nominal voltage: 12 V. Type: Ultra Beam H9. Po...
€68,06 €56,25 €65,54 €54,16
You save 4%
Internal plate PTO clutch 2 mm, 119 - 178 mm
Version: Thickness: 2 mm Inner: 119 mm Outer: 178 mm More
Version: Thickness: 2 mm Inner: 119 mm Outer: 178 mm
€92,90 €76,78 €85,47 €70,63
You save 8%
Carraro Pin upper arm Carraro front axle Ø 37 / 45 / 59,5 mm, length 233 mm
€427,40 €353,22 €393,21 €324,97
You save 8%
Ball joint 430 mm, M22 x 1,5, M22 x 1,5, taper 23 - 25 mm
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper: 23 - 25 mm. More
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper...
€170,61 €141,00 €156,96 €129,72
You save 8%
Brake disc Ø 241 mm, thickness 5 mm, 28 teeth
€51,29 €42,39 €47,19 €39,00
You save 8%
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
€692,87 €572,62 €637,44 €526,81
You save 8%
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
Borg Warner Cooling fan Ø 570 mm Case IH, New Holland, Steyr
€221,72 €183,24 €186,52 €154,15
You save 16%
Clamp New Holland, Steyr, Case IH
€58,35 €48,22 €53,68 €44,37
You save 8%
Silencer with air extraction New Holland, Steyr, Case IH
€1.606,26 €1.327,49 €1.477,76 €1.221,29
You save 8%
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
V-belt tensioner Ø 74 mm, width 46,5 mm, engine Sisu 66-74
Outer Ø: 74 mm. Width: 46,5 mm. More
Outer Ø: 74 mm. Width: 46,5 mm.
€166,68 €137,75 €153,35 €126,73
You save 8%
Optibelt Multi-rib belt Case IH CVX 140-195, 1195
€76,28 €63,04 €70,18 €58,00
You save 8%
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€105,23 €86,97 €96,81 €80,01
You save 8%
Hydraulic top link cat. 3, 680 - 990 mm, stroke 310 mm, Ø 90 mm
A cat.: 3 / 32. B cat.: 3 / 32. F: 680 / 990 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 90 mm. Lifting force: 11 t. Tensile force: 8 t. Stroke: ... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 680 / 990 mm. Piston rod Ø D: 45 m...
€1.000,01 €826,45 €920,01 €760,34
You save 8%
Fender bracket right complete CVX 140-195
€660,99 €546,27 €608,11 €502,57
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€952,66 €787,32 €835,29 €690,32
You save 12%
Showing 97 - 144 of 252

New Holland T7550 parts for the hitch, cab and electrics

A T7550 earns its keep pulling heavy trailers, slurry tankers and bale carts, and that work shows up first at the back of the tractor. The hitch pin develops play, the latch gets stiff and eventually the automatic jaw stops closing cleanly. This page brings together more than 200 new replacement parts that fit the New Holland T7550, from makers such as GRANIT, Scharmüller, ROCKINGER, HELLA and Carraro. Everything here is matched to this one model, so you are not wading through parts meant for other tractors.

Drawbars, Piton Fix and adapter plates

For the rear hitch there are automatic drawbars, Piton Fix units for the rail system, top drawbars and height adjustable adapter plates. That means you can replace a worn jaw without renewing the entire rail, or switch to a Piton Fix if you regularly run implements with a rigid drawbar eye.

Before ordering, get the tape measure out. Check the rail width and the locking pin diameter on your own tractor and compare the hole pattern of the adapter plate with the mounting on the rear frame. A plate that does not line up leaves the hitch crooked or at the wrong height, and you only find out once a trailer is hooked on. Retighten the bolts after the first few days of work.

Switches, lighting and the operator seat

The T7550 cab has a row of rocker switches in the dashboard, including the one for the front work lights. There are also push button switches, such as the one that lowers the front linkage, and relays for the individual circuits. When a function quits, check the relay and the plug before blaming the switch. A corroded contact often causes exactly the same symptoms and takes a few minutes to clean.

Lighting covers work lamps with a flood beam, and alternators keep the charging side going. For long days in the field you will find air suspended tractor seats with fabric covers, plus gas struts for windows and hatches that no longer stay open on their own.

Engine, steering and finding the right fit

On the engine side you will find O-rings for the oil filler cap, water pump gaskets and other seals. Up front, the steering ball joints wear too, and replacements are here as well. When you swap a ball joint, renew the dust boot and the locking hardware too, so dirt cannot get at the ball.

To be sure a part fits, read the data plate on your tractor and compare the reference number stamped on the old part with the details on the product. The T7550 belongs to the T7500 range alongside the New Holland T7540, which has its own page and its own selection. For every other tractor from this maker, head to the New Holland parts overview and pick your model from there.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart