Menu
EUR

New Holland TD5010 tractor parts & technical data

This page lists more than 180 parts for the New Holland TD5010 from the TD5000 series. It covers trailer couplings, brake and transmission parts and lighting.

186 parts found for New Holland TD5010
Show:
GRANIT Tank sender signal transmitter Case IH JX 60-95, New Holland TD5010-5050
5%
GRANIT
Tank sender signal transmitter Case IH JX 60-95, New Holland TD5010-5050
Version: Signal transmitter
€281,30 €232,48 €267,20 €220,83
 
SACHS Clutch plate 280 22 x 25 mm, 10 splines
5%
SACHS
Clutch plate 280 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves
€135,53 €112,01 €128,75 €106,41
 
Danfoss Orbitrol OSPC 100 ON Case IH, Fiat, New Holland
5%
Danfoss
Orbitrol OSPC 100 ON Case IH, Fiat, New Holland
Type: OSPC 100 ON / 150-1151
€1.048,56 €866,58 €996,10 €823,22
 
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
5%
Eaton
PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Reference no.: 5185602
€188,76 €156,00 €179,30 €148,18
 
Eaton Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
5%
Eaton
Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
Reference no.: 5131169
€253,62 €209,60 €240,90 €199,09
 
SANDEN Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, PV4, 190 ccm oil
5%
SANDEN
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, PV4, 190 ccm oil
Fixing: DM | Reference no.: 8279 | Pulley Ø (mm): 112 | Refrigerant: R 134a | No...
€646,14 €534,00 €613,80 €507,27
 
Eaton Gear wheel transmission 1,57 kg Case IH, Fiat, Ford, New Holland
5%
Eaton
Gear wheel transmission 1,57 kg Case IH, Fiat, Ford, New Holland
Reference no.: 5125013
€312,66 €258,40 €297,00 €245,45
 
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
5%
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2...
€68,70 €56,78 €65,25 €53,93
 
GRANIT Ball joint 1303 mm, taper 18 - 20,2 mm, M16 x 1,5 / M20 x 1
5%
GRANIT
Ball joint 1303 mm, taper 18 - 20,2 mm, M16 x 1,5 / M20 x 1
A: 1303 mm. C: M16 x 1,5 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20...
€164,63 €136,06 €156,35 €129,21
 
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 ...
€258,60 €213,72
 
Borg Warner Fan clutch Case IH, Steyr, New Holland
Borg Warner
Fan clutch Case IH, Steyr, New Holland
€185,70 €153,47
 
Exhaust pipe Case IH, New Holland
5%
Exhaust pipe Case IH, New Holland
€200,94 €166,07 €190,85 €157,73
 
GRAMMER Seat Compacto Basic S MSG83/511, mechanical, PVC, 400 mm
5%
GRAMMER
Seat Compacto Basic S MSG83/511, mechanical, PVC, 400 mm
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Tra...
€1.010,89 €835,45 €960,30 €793,64
 
GRANIT Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
5%
GRANIT
Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
Dimensions: Ø: 25 mm.
€48,32 €39,93 €45,90 €37,93
 
GRANIT Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
GRANIT
Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
Dimensions: 23 x 37 x 11 mm.
€24,15 €19,96
 
GRANIT Lifting shaft sealing ring 55 x 70 x 8/8,5 mm Ford, Fiat, New Holland
GRANIT
Lifting shaft sealing ring 55 x 70 x 8/8,5 mm Ford, Fiat, New Holland
Dimensions: 55 x 70 x 8/8.5 mm.
€3,60 €2,98
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
23%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.498,36 €1.238,31 €1.147,30 €948,18
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
18%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.058,75 €875,00 €873,45 €721,86
 
GRANIT Clutch cable driving clutch 800 mm, sleeve 480 mm New Holland
5%
GRANIT
Clutch cable driving clutch 800 mm, sleeve 480 mm New Holland
To fit as: New Holland TD 60D, 70D, 80D, 90D, 95D, 5010, 5020, 5030, 5040, 5050
€35,40 €29,26 €33,60 €27,77
 
GRANIT Clutch cable PTO clutch 1330 mm, sleeve 985 mm New Holland
10%
GRANIT
Clutch cable PTO clutch 1330 mm, sleeve 985 mm New Holland
To fit as: New Holland TD 60D, 70D, 80D, 90D, 95D, 5010, 5020, 5030, 5040, 5050,...
€110,90 €91,65 €100,30 €82,89
 
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
23%
ROCKINGER
Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
 
GRANIT Gear wheel reduction 50 teeth Case IH, Fiat, New Holland
5%
GRANIT
Gear wheel reduction 50 teeth Case IH, Fiat, New Holland
Number of teeth: 50
€459,16 €379,47 €436,20 €360,50
 
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
5%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length ...
€56,19 €46,44 €53,35 €44,09
 
LUK Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
5%
LUK
Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintered clutch l...
€156,20 €129,09 €148,35 €122,60
 
Showing 49 - 72 of 186

New Holland TD5010 parts for the gearbox, clutch and cooling system

The TD5010 is a straightforward tractor that rewards owners who do their own maintenance. This page lists more than 180 parts that fit the New Holland TD5010, from GRANIT, ROCKINGER, Eaton, GRAMMER and LUK.

Clutch and transmission

If you are splitting the tractor for a new clutch, there are complete clutch kits, separate clutch plates and thrust bearings for the driving clutch. Inside the gearbox you can replace gear wheels and driven shafts. Sealing rings for the lift piston and lifting shaft seals stop the hydraulics from leaking.

Do not overlook the radiator cap

A radiator cap looks trivial, yet its rubber seal and spring are what keep the cooling system under pressure. When the seal has gone hard or split, the coolant boils sooner and escapes through the overflow without any visible leak. If your TD5010 keeps running hot, replace the cap before you start on the thermostat or water pump. Only ever open it with the engine cold.

Replacing gear wheels

If a gear wheel in the TD5010 gearbox has to be replaced, look closely at the gear it meshes with as well. A new gear running against a worn partner wears faster and gets noisier. Check for chipped tooth flanks and pitting on the surface, and replace both gears if in doubt. Flush the gearbox and refill it with fresh oil at the same time so no metal particles stay behind. On the cooling fan, check the roots of the blades for fine cracks, because a blade that breaks off can damage the radiator.

Other parts for the TD5010

  • Ball joints for the steering
  • Cooling fans and radiator caps
  • Alternators
  • Gas struts
  • Automatic drawbars and Piton Fix hitches
  • GRAMMER seats from the Compacto range

Identifying the right part

The serial number of your TD5010 is on the type plate and comes in handy whenever you want to check fitment. For gear wheels, count the teeth on the old one. For a clutch plate, count the splines. Any number stamped on the part you removed is the best thing to compare with the parts on this page.

Other tractors in the TD5000 series

The other TD5000 models have separate pages, each listing the parts for that tractor:

For any other model from the brand, start from the page with all New Holland parts, where every range is sorted by type so you can get to the right page in a couple of clicks.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart