Menu
EUR

New Holland TD5.75 tractor parts & technical data

For the New Holland TD5.75 from the TD5 series you will find more than 160 items here, covering trailer couplings, brakes, transmission and electrics.

163 parts found for New Holland TD5.75
Show:
Gas strut rear window 320 N, 460 mm, stroke 182 mm Case IH, New Holland
suitable for: Heckscheibe. Newtons: 320. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 182 mm. To fit: rear screen. More
suitable for: Heckscheibe. Newtons: 320. A: 460 mm. B: 245 mm. C: 8 mm...
€37,63 €31,10
Spacer 25 x 42 x 24 mm Case IH, Fiat, New Holland
Dimensions: 25 x 42 x 24 mm. More
Dimensions: 25 x 42 x 24 mm.
€27,15 €22,44
Sealing ring piston 110 x 114 x 4 mm Fiat, Ford, New Holland
Dimensions: 110 x 114 x 4 mm. More
Dimensions: 110 x 114 x 4 mm.
€18,21 €15,05
Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
€2,99 €2,47
Hydraulic top link cat. 2, 700 - 1036 mm, stroke 336 mm, Ø 70 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 700 / 1036 mm. Piston rod Ø D: 35 mm. Cylinder Ø inner E: 70 mm. Check valve: Top. Lifting force: 6 t. Tensil... More
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 700 / 1036 mm. Piston rod Ø D:...
€672,67 €555,93 €618,86 €511,45
You save 8%
Gas strut rear window 350 N, 460 mm
Newtons: 350. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear screen. Form: 2. More
Newtons: 350. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear scr...
€30,51 €25,22
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.748,75 €1.445,25 €1.382,58 €1.142,63
You save 21%
Thrust washer Ø 171,1 x 94,3 mm, thickness 2,65 mm
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm. More
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm.
€23,60 €19,50
Dayco Multi-rib belt Powerband 8 ribs, 1385 mm
Dayco
Length: 1385 mm. Ribs: 8 n. More
Length: 1385 mm. Ribs: 8 n.
€52,59 €43,46 €48,38 €39,99
You save 8%
Oil cooler Case IH Farmall JX 75-110, New Holland T4020-T4050
€225,95 €186,74 €207,87 €171,80
You save 8%
Bearing for lower link shaft Ø 30 mm Ford, Case IH, Fiat, Steyr, New Holland
€64,99 €53,71 €59,79 €49,41
You save 8%
Bush left lift arm shaft 62,8 x 68,2 x 40 mm Ford, Fiat, New Holland
Dimensions: 62.8 x 68.2 x 40 mm. More
Dimensions: 62.8 x 68.2 x 40 mm.
€23,03 €19,03
Showing 145 - 163 of 163

New Holland TD5.75 parts for the clutch, driveline and hitch

A TD5.75 that spends its days on yard work, road haulage and field jobs tends to show wear first in the clutch and at the back end where implements and trailers hang. This page lists more than 160 parts that fit the New Holland TD5.75, including thrust bearings, clutch plates and complete clutch kits, gear wheels and planetary gears, sealing rings for pistons and shafts, drawbars, ball joints and steering cylinders. Brands include GRANIT, LUK, Eaton, ROCKINGER and Walterscheid.

Doing the clutch once, properly

A slipping clutch is rarely cured by a plate alone. If the tractor is already split, replace the thrust bearing and the nearby seals at the same time so you are not opening it up again a season later. Check the flywheel face for scoring or blue heat marks, since a damaged face will glaze a new plate quickly. If the old plate was oily, find the leak before you reassemble, because a weeping crankshaft or input shaft seal is often what killed it. You will find clutch kits for the double plate clutch, single clutch plates and thrust bearings for the driving clutch here.

Drawbars, Piton Fix and lift linkage

For hitching there are automatic drawbars for the rail, Piton Fix units with locking pin and hydraulic lifting struts with a clevis at each end. Before ordering a rail drawbar, measure the rail width and pin diameter of the bracket on your tractor. Those two figures decide whether the new part slides into the guide. On the steering side you will find ball joints and steering cylinders. A knock when you turn the wheel on the spot usually means a worn ball joint, so check both ends of the track rod and have the toe reset after fitting.

Gears, planetary gears and shafts

A gearbox that whines under load or jumps out of a gear is worth opening before the damage spreads. Besides gear wheels there are planetary gears and shafts on this page, including one for the PTO input. Check the bearing seats and thrust faces as well as the teeth, and refill with fresh transmission oil after reassembly so debris from the old failure does not reach the new parts.

Matching the part to your tractor

The model and serial number are on the type plate, and the reference number stamped or cast into the old part is often the quickest way to compare. For cooling there are radiators and intercoolers, and for the cab there are gas struts. If you also run another model from the TD5 line, use its own page, which only shows parts for that type: New Holland TD5.85 and New Holland TD5.95. Everything for the brand is under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart