Menu
EUR

New Holland TD5.85 tractor parts & technical data

Brakes, transmission, electrics or a trailer coupling for the New Holland TD5.85? You will find it among the more than 180 parts for this model.

184 parts found for New Holland TD5.85
Show:
GRANIT Steering cylinder right and left, ball eye Ø 20 mm
GRANIT
Technical data: Ball eye Ø: 20 mm. More
Technical data: Ball eye Ø: 20 mm.
€454,54 €375,65 €431,80 €356,86
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Dayco Multi-rib belt Powerband 8 ribs, 1385 mm
Dayco
Length: 1385 mm. Ribs: 8 n. More
Length: 1385 mm. Ribs: 8 n.
€50,40 €41,65 €47,85 €39,55
You save 5%
GRANIT Radiator Case IH Farmall 65A, 75A, New Holland TD5.65, TD5.75
GRANIT
To fit as: New Holland Series TD5: TD5.65–TD5.115; Case IH Series Farmall: 65A–115A Tier 3; Series Farmall JX: JX 70–100 Tier 3a More
To fit as: New Holland Series TD5: TD5.65–TD5.115; Case IH Series Fa...
€496,62 €410,43 €471,75 €389,88
You save 5%
GRANIT Radiator Case IH Farmall 105A, 115A, New Holland TD5.105, TD5.115
GRANIT
To fit as:
Case IH Farmall 65A Tier 3 (11/12–), Farmall 75A Tier 3 (11/12–), Farmall 85A Tier 3 (11/12–), Farmall 95A Tier 3 (12/12–), Farmal...
More
To fit as:
Case IH Farmall 65A Tier 3 (11/12–), Farmall 75A Tier 3 ...
€529,44 €437,55 €502,95 €415,66
You save 5%
Optibelt Powerband multi-rib belt 8 ribs New Holland, Case IH, Steyr
€88,04 €72,76 €83,60 €69,09
You save 5%
GRANIT Spacer 25 x 42 x 24 mm Case IH, Fiat, New Holland
GRANIT
Dimensions: 25 x 42 x 24 mm. More
Dimensions: 25 x 42 x 24 mm.
€26,00 €21,49
GRANIT Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
GRANIT
Dimensions: 23 x 37 x 11 mm. More
Dimensions: 23 x 37 x 11 mm.
€24,15 €19,96
Bush left lift arm shaft 62,8 x 68,2 x 40 mm Ford, Fiat, New Holland
Dimensions: 62.8 x 68.2 x 40 mm. More
Dimensions: 62.8 x 68.2 x 40 mm.
€22,00 €18,18
GRANIT Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Dimensions: 98 x 3.6 mm. More
Dimensions: 98 x 3.6 mm.
€2,86 €2,36
GRANIT Hydraulic lifting strut clevis/clevis, 520 mm, stroke 148 mm
GRANIT
Type: Clevis joint/clevis joint. A: 26 mm. S: 37 mm. B: 22 mm. S1: 32 mm. L: 520 mm. C: 40 mm. D: 80 mm. Stroke: 148 mm. suitable for: Case IH, New Ho... More
Type: Clevis joint/clevis joint. A: 26 mm. S: 37 mm. B: 22 mm. S1: 32 ...
€460,28 €380,40 €437,25 €361,36
You save 5%
Sauermann Drawbar inner part 320 mm, coupling pin 31 mm, 2000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 80,4 kN. Colour: Black. More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€686,31 €567,20 €651,95 €538,80
You save 5%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
GRANIT Brake light switch oil pressure 1/8 inch NPTF, make contact 1,0 bar
GRANIT
Version: Thread 1/8" (NPTF), Make contact 1.0 bar, Blade terminal. More
Version: Thread 1/8" (NPTF), Make contact 1.0 bar, Blade terminal.
€79,66 €65,83 €72,00 €59,50
You save 10%
GRANIT Oil pressure switch M12 x 1,5, 0,3 - 0,6 bar, blade connection
GRANIT
Version: 0.3 - 0.6 bar, Thread M12 x 1.5, Blade terminal. More
Version: 0.3 - 0.6 bar, Thread M12 x 1.5, Blade terminal.
€16,70 €13,80
Cobo Replacement key universal for Cobo switches
Cobo
Version: To fit various Cobo switches. More
Version: To fit various Cobo switches.
€6,40 €5,29
GRANIT Gear wheel reduction 50 teeth Case IH, Fiat, New Holland
GRANIT
Number of teeth: 50 More
Number of teeth: 50
€459,16 €379,47 €436,20 €360,50
You save 5%
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€29,15 €24,09
MAHLE Alternator 14 V, 120 A, fastening 82 / 10,2 / 86 mm, pulley-Ø 55 mm
MAHLE
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 120 | Direction of rotation: ↻ | Charging current (A): 120 | ... More
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal valu...
€518,09 €428,17 €323,75 €267,56
You save 38%
GRANIT Clutch cable Case IH, New Holland
€34,74 €28,71 €33,00 €27,27
You save 5%
Showing 73 - 96 of 184

New Holland TD5.85 parts

Play in the steering, an engine that runs hot or a PTO that no longer engages cleanly are complaints most TD5.85 owners meet sooner or later. This page holds more than 180 parts that fit the tractor, from GRANIT, ROCKINGER, LUK, GRAMMER and Eaton.

Driveline, PTO and clutch

For the driveline there are gear wheels for the gearbox, shafts such as the PTO input shaft, sealing rings and thrust bearings. Clutch plates and complete clutch kits cover the clutch itself.

Steering and front axle

Ball joints and track rods are the steering parts that wear first. Have someone turn the wheel back and forth while you watch each joint. If the housing moves relative to the pin, the joint is due. After replacing a track rod or ball joint, always reset the toe-in, or the front tyres will wear out quickly.

Cooling and charging

Radiators and cooling fans keep engine temperature in check. A radiator clogged on the outside with chaff and dust cools poorly, so blow it out regularly from the inside outwards. Alternators are available too.

Hitch and seat

At the rear there are automatic drawbars and Piton Fix parts. In the cab, seats such as the Compacto and gas struts look after comfort.

Replacing gears and shafts

When a gear in the gearbox has to be replaced, inspect the gear it meshes with as well. Damaged teeth on one side nearly always leave marks on the other. While the box is open, clean the magnetic drain plug and look at what it has collected. Fine paste is normal, but larger flakes of metal point to a problem that has not been found yet. Renew any sealing rings and thrust bearings you come across on the way, so a minor leak never forces you to strip the box a second time.

Making sure it fits your TD5.85

Read the type plate first so you know for certain the tractor is a TD5.85. For gear wheels and shafts, the reference number on the old part is the safest point of comparison. If it can no longer be read, count the teeth and check them against the product details.

Within the New Holland range, this tractor belongs to the TD5 line-up. The other models in that series have pages of their own:

For tractors from other New Holland ranges, go to the overview of all New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart