Menu
EUR

New Holland TD5.95 tractor parts & technical data

Brake parts, trailer couplings or steering components for the New Holland TD5.95? Choose from more than 170 parts for this TD5 series model here.

180 parts found for New Holland TD5.95
Show:
Seal kit
€50,30 €41,57 €46,28 €38,24
You save 8%
Ball joint 1515 mm, M18 x 1,5, taper 20 - 22 mm, line-Ø 34 mm
A: 1515 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. Tube Ø: 34 mm. More
A: 1515 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Tape...
€118,86 €98,23 €109,35 €90,37
You save 8%
Half shaft left rear axle New Holland TD55-TD95, TD5010-TD5050
€529,17 €437,33 €486,84 €402,34
You save 8%
Radiator Case IH Farmall 65A, 75A, New Holland TD5.65, TD5.75
To fit as: New Holland Series TD5: TD5.65–TD5.115; Case IH Series Farmall: 65A–115A Tier 3; Series Farmall JX: JX 70–100 Tier 3a More
To fit as: New Holland Series TD5: TD5.65–TD5.115; Case IH Series Fa...
€518,22 €428,28 €476,76 €394,02
You save 8%
Glow plug 12 V, thread 1/2 inch BSP
Version: 12 V, thread 1/2" BSP. More
Version: 12 V, thread 1/2" BSP.
€26,85 €22,19
Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
€50,42 €41,67 €46,39 €38,34
You save 8%
Stabilizer 405 - 510 mm, eye-Ø 19 mm, thread 42 x 4 mm
Eye Ø: 19 mm. C sleeve length: 318 mm. Thread: 42 x 4 mm. Length min./max.: 405 - 510 mm. More
Eye Ø: 19 mm. C sleeve length: 318 mm. Thread: 42 x 4 mm. Length min....
€166,92 €137,95 €153,57 €126,91
You save 8%
Rear-view mirror tractor, construction machinery, forklifts
€71,09 €58,75 €65,40 €54,05
You save 8%
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawba... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€910,37 €752,37 €876,79 €724,62
You save 4%
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
LUK Clutch kit Case IH JX 70 - 95, New Holland T4, T5, TD5, TN
LUK
Contents: Pressure plate 458228013610, clutch plate 458328033210 More
Contents: Pressure plate 458228013610, clutch plate 458328033210
€955,18 €789,41 €928,77 €767,58
You save 3%
Shim brake Ø 171,1 x 94,3 mm, thickness 3 mm Case IH, New Holland
Inner Ø (mm): 94,3 | Outer Ø (mm): 171,1 | Thickness (mm): 3 More
Inner Ø (mm): 94,3 | Outer Ø (mm): 171,1 | Thickness (mm): 3
€20,51 €16,95
Door contact switch 12 V / 24 V, continuous load 2 A
Version: 12 V / 24 V continuous load 2 A More
Version: 12 V / 24 V continuous load 2 A
€37,25 €30,79
Seal kit hydraulic steering Case IH, Steyr, New Holland
€100,29 €82,88 €92,27 €76,25
You save 8%
Track rod complete 1475 mm, M20 x 1, 18 - 20 mm, 35 mm
A: 1460 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 35 mm. F: 30 mm. More
A: 1460 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 35 ...
€207,58 €171,55 €190,97 €157,83
You save 8%
Track rod complete 1520 mm, M20 x 1, 18 - 20 mm, 34 mm
A: 1500 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 34 mm. F: 22,5 mm. More
A: 1500 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 34 ...
€247,62 €204,64 €227,81 €188,27
You save 8%
Ball head 80 mm, M20 x 1, taper 18,2 - 20,2 mm
A: 80 mm. D: M20 x 1 mm. E: 18,2 mm. F: 20,2 mm. Taper: 18,2 - 20,2 mm. More
A: 80 mm. D: M20 x 1 mm. E: 18,2 mm. F: 20,2 mm. Taper: 18,2 - 20,2 mm...
€33,25 €27,48 €30,59 €25,28
You save 8%
Steering cylinder right and left, ball eye Ø 20 mm
Technical data: Ball eye Ø: 20 mm. More
Technical data: Ball eye Ø: 20 mm.
€474,31 €391,99 €436,37 €360,63
You save 8%
As PTO input Case IH, New Holland
€151,77 €125,43 €139,63 €115,40
You save 8%
Intercooler Case IH, New Holland Series TD5-TD4000F, TD4.70F-TD5.95
€241,24 €199,37 €221,94 €183,42
You save 8%
Radiator Case IH Farmall 105A, 115A, New Holland TD5.105, TD5.115
To fit as:
Case IH Farmall 65A Tier 3 (11/12–), Farmall 75A Tier 3 (11/12–), Farmall 85A Tier 3 (11/12–), Farmall 95A Tier 3 (12/12–), Farmal...
More
To fit as:
Case IH Farmall 65A Tier 3 (11/12–), Farmall 75A Tier 3 ...
€552,47 €456,59 €508,27 €420,06
You save 8%
Exhaust pipe Case IH, New Holland
€209,69 €173,30 €192,91 €159,43
You save 8%
Lift arm 970 mm, eye-Ø 26 / 28 mm Fiat, New Holland, Case IH
Eye Ø: 26 / 28 mm. Length: 970 mm. More
Eye Ø: 26 / 28 mm. Length: 970 mm.
€222,73 €184,07 €204,91 €169,35
You save 8%
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.122,48 €927,67 €864,85 €714,76
You save 23%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 102 kN. Load capacity: 4 t. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.431,83 €1.183,33 €1.103,20 €911,74
You save 23%
Ball joint taper 16,2 - 18,3 mm, length 100 mm, M14 x 1,5, M22 x 1,5 L
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm....
€71,69 €59,25 €65,95 €54,51
You save 8%
Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. Taper: 20 - 22,3 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. T...
€35,82 €29,60 €32,95 €27,24
You save 8%
Planetary gear transmission 19 / 14 teeth New Holland
Number of teeth: 19/14. More
Number of teeth: 19/14.
€83,31 €68,85 €76,65 €63,34
You save 8%
Intercooler Case IH, New Holland
€445,65 €368,31 €410,00 €338,84
You save 8%
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,93 €12,33
Silencer Case IH, New Holland
€178,12 €147,21 €163,87 €135,43
You save 8%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.489,09 €1.230,65 €1.197,32 €989,52
You save 20%
Brake light switch oil pressure 1/8 inch NPTF, make contact 1,0 bar
Version: Thread 1/8" (NPTF), Make contact 1.0 bar, Blade terminal. More
Version: Thread 1/8" (NPTF), Make contact 1.0 bar, Blade terminal.
€79,17 €65,43 €72,84 €60,20
You save 8%
Track rod steering
€95,35 €78,80
Track rod A 1077 - 1477 mm, B M22 x 1,5, D M22 x 1,5, E 28 mm
A: 1077 - 1477 mm. B: M22 x 1,5 mm. C: 16 - 18 mm. G: . D: M22 x 1,5 mm. E: 28 mm. F: 20,6 mm. More
A: 1077 - 1477 mm. B: M22 x 1,5 mm. C: 16 - 18 mm. G: . D: M22 x 1,5 m...
€179,72 €148,53 €165,34 €136,65
You save 8%
Ball joint 540 mm, M14 x 1,5, 20 mm
A: 540 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 540 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,3 mm. Taper: 1...
€60,16 €49,72 €55,35 €45,74
You save 8%
Steering cylinder eye-Ø 25 mm, length 384 mm, stroke 230 mm
Technical data: Length: 384 mm Eye Ø: 25 mm Stroke: 230 mm. More
Technical data: Length: 384 mm Eye Ø: 25 mm Stroke: 230 mm.
€466,08 €385,19 €428,79 €354,37
You save 8%
Control gear transmission 50 teeth Fiat, New Holland
Number of teeth: 50. More
Number of teeth: 50.
€680,84 €562,68 €626,37 €517,66
You save 8%
Bowden cable 658 mm Case IH, New Holland
€14,74 €12,18
Borg Warner Fan clutch Case IH, Steyr, New Holland
€238,64 €197,22 €228,12 €188,53
You save 4%
Borg Warner Cooling fan electric Ø 450 mm, thread M24 x 1,5 L
Borg Warner
Ø: 450 mm. Thread: M24 x 1.5 L. More
Ø: 450 mm. Thread: M24 x 1.5 L.
€424,45 €350,79 €357,06 €295,09
You save 16%
Radiator Case IH Farmall 85A, 95A, New Holland TD5.85, TD5.95
To fit as: New Holland Series TD5: TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, TD5.115; Case IH Series Farmall: Farmall 65A, 75A, 85A, 95A, 105A, 115A Ti... More
To fit as: New Holland Series TD5: TD5.65, TD5.75, TD5.85, TD5.95, TD5...
€527,24 €435,74 €485,06 €400,88
You save 8%
Showing 97 - 144 of 180

New Holland TD5.95 parts for the driveline, steering and cooling

The TD5.95 is a tractor people keep running for a long time, and that means the driveline eventually needs attention. This page lists more than 170 replacement parts that fit it, from GRANIT, ROCKINGER, LUK, Eaton and Walterscheid.

Clutch, PTO and gearbox

For the main clutch there are clutch plates, thrust bearings and pilot bearings. Once the tractor is split, change all three together. A rough pilot bearing left in place will hum every time you press the pedal, and nobody wants to split the tractor twice. Slide the new plate onto the input shaft before fitting to make sure the splines run freely, then centre it with an alignment tool before tightening the pressure plate. If the flywheel face shows scoring or blue heat spots, have it skimmed before the new plate goes on.

The gearbox side covers gear wheels for the transmission, shafts for the PTO input and sealing rings for the piston. Pitting or chipped edges on the tooth faces are a sign to check the mating gear as well. Give new piston sealing rings a light coat of oil before fitting, so they slide in without catching on an edge and tearing.

Steering, cooling and the rest

  • Track rods and ball joints for the front axle. Measure the old track rod before you remove it, set the new one to the same length and have the toe-in checked.
  • Radiators and cooling fans. Wash a clogged radiator from the engine side outwards at low pressure so the fins stay straight. A fan with cracked blades runs out of balance and wears the water pump bearing over time.
  • Alternators, aircon compressors and gas struts for the rear window.
  • Drawbars and Piton Fix hitches for the rear. On a Piton Fix, check the locking pin and the guide for wear, as that is where the slack comes from that you feel as a jolt when pulling away.

Getting the right part for your TD5.95

Check the rating plate and note the serial number, then hold the reference number from the old part against the product details. The TD5.95 belongs to the TD5 series, and the two other models in that line have their own pages: New Holland TD5.75 and New Holland TD5.85. That way every tractor on the farm gets parts chosen for that exact model. All models of the brand are gathered under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart