Menu
EUR

New Holland TM125 tractor parts & technical data

Electrics is one of the product groups for the New Holland TM125, alongside trailer couplings and lighting. Altogether more than 200 parts are listed here.

235 parts found for New Holland TM125
Show:
Optibelt Powerband V-belt 8 grooves Ford, Fiat, Case IH, New Holland
5%
Optibelt
Powerband V-belt 8 grooves Ford, Fiat, Case IH, New Holland
€74,12 €61,26 €70,40 €58,18
 
Optibelt Multi-rib belt Powerband John Deere, Ford, Case IH, Fiat, New Holland
5%
Optibelt
Multi-rib belt Powerband John Deere, Ford, Case IH, Fiat, New Holland
€73,73 €60,93 €70,00 €57,85
 
Electric feed pump without filter 230 l/hour, 0,55 bar
5%
Electric feed pump without filter 230 l/hour, 0,55 bar
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005.
€109,94 €90,86 €104,40 €86,28
 
Piston clamp dimensions 3 mm (trapeziumvormige ring) / 2,5 mm / 5 mm
5%
Piston clamp dimensions 3 mm (trapeziumvormige ring) / 2,5 mm / 5 mm
Dimensions: Ring dimensions 3 mm (trapezoidal ring) / 2.5 mm / 5 mm.
€157,71 €130,34 €149,80 €123,80
 
Handle for- and rear window lock
Handle for- and rear window lock
€34,00 €28,10
 
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
5%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/le...
€32,43 €26,80 €30,80 €25,45
 
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left.
€16,10 €13,31
 
Gas strut roof window 200 N, 215 mm
Gas strut roof window 200 N, 215 mm
Newtons: 200. A: 215 mm. B: 105 mm. C: 6 mm. D: 8 mm. To fit: roof hatch. Form: ...
€31,00 €25,62
 
GRANIT Lift rod right 640 - 850 mm, M33 x 3 mm, eye-Ø 24 mm
5%
GRANIT
Lift rod right 640 - 850 mm, M33 x 3 mm, eye-Ø 24 mm
Eye Ø: 24 mm. Thread: M33 x 3 mm. Sleeve length: 280 mm. Length min./max.: 640 -...
€563,50 €465,70 €535,30 €442,40
 
GRANIT Cover for switch cut-off / controls
GRANIT
Cover for switch cut-off / controls
Version: For switch cut-out (fittings).
€17,60 €14,55
 
Scharmüller Drawbar frame 82,4 kN, rail width 330 mm, nose weight 3000 kg
Scharmüller
Drawbar frame 82,4 kN, rail width 330 mm, nose weight 3000 kg
Detent pin Ø (mm): 25 | Lock: Ball 80 manual | Category: Bearing supports | Guid...
€2.156,70 €1.782,40
 
GRANIT Repair set clutch cylinder Fiat, Ford, McCormick, New Holland
5%
GRANIT
Repair set clutch cylinder Fiat, Ford, McCormick, New Holland
€49,25 €40,70 €46,75 €38,64
 
LUK Torsion damper Ø 348 mm, 35x40, 14 teeth Case IH, New Holland
5%
LUK
Torsion damper Ø 348 mm, 35x40, 14 teeth Case IH, New Holland
Tooth profile: 35x40 | Number of teeth: 14 | Diameter (mm): 348
€551,93 €456,14 €524,30 €433,31
 
FEBI Multi-rib belt Powerband John Deere, Ford, Case IH, Fiat, New Holland
56%
FEBI
Multi-rib belt Powerband John Deere, Ford, Case IH, Fiat, New Holland
To fit as: New Holland
€47,01 €38,85 €20,82 €17,21
 
MAHLE Gear reduction starter 12 V, 3,0 kW, 10 teeth, clockwise, Ø 92 mm
38%
MAHLE
Gear reduction starter 12 V, 3,0 kW, 10 teeth, clockwise, Ø 92 mm
€537,01 €443,81 €335,60 €277,36
 
GRANIT Clutch cylinder mineral oil Ford, Fiat, New Holland
5%
GRANIT
Clutch cylinder mineral oil Ford, Fiat, New Holland
€246,36 €203,60 €234,00 €193,39
 
GRANIT Sealing ring foot brake 259,6 x 266,4 x 3,4 mm
5%
GRANIT
Sealing ring foot brake 259,6 x 266,4 x 3,4 mm
€48,22 €39,85 €45,80 €37,85
 
Showing 193 - 216 of 235

New Holland TM125 parts for engine, linkage and cab

Fan clutches, starter motors and lift cylinder seal kits are just a few of the more than 200 New Holland TM125 parts on this page. They come from GRANIT and from brands such as Scharmüller, Cobo, MAHLE and GRAMMER.

Do not overlook the oil pressure switch either. If the warning light comes on while the oil level is fine, check the switch and its wire first. A faulty switch is a small replacement, and it tells you quickly whether there is a real lubrication problem.

Engine running hot

If your TM125 warms up faster than it used to, the fan clutch is one of the first things to check. Only once the engine has cooled down should you rotate the fan blades by hand to check them. It should offer some resistance and must not wobble. If it spins freely or has play, the clutch or its bearing is worn. Besides fan clutches there are alternators, starter motors, oil pressure switches and an exhaust manifold gasket for the joint to the turbocharger.

Linkage seals

For the hydraulic lift there are seal kits for the outer lift cylinder, piston O-rings and sealing rings for the lift arm shaft. Many of these seals are also used on Fiat, Ford and Case IH tractors. When you replace a seal kit, lay the old rings out in order so each new one goes back the same way round. A seal fitted backwards leaks straight away.

Cab and front lights

The cab can take air suspended tractor seats in fabric and new gas struts, such as those for the rear window. An aircon compressor is available for the air conditioning. At the front you can renew the headlights, and there are tank caps for the fuel tank.

Hitching up

Drawbars with a K80 ball and height adjustable adapter plates make it easier to hitch different trailers. You can raise or lower the towing point without swapping the whole frame.

Choosing the correct part

The type plate shows whether the tractor really is a TM125. Use the reference number on the old part as well. The TM125 is part of the New Holland TM series, and several of its siblings already have a page of their own: New Holland TM115, New Holland TM120, New Holland TM140, New Holland TM155, New Holland TM165 and New Holland TM190. Other models of the make are listed under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart