Menu
EUR

New Holland TM130 tractor parts & technical data

Does it fit the New Holland TM130? On this model page it does. You will find more than 250 parts from the TM series, such as trailer couplings and lighting.

273 parts found for New Holland TM130
Show:
Starter motor with reduction 12 V, 4,2 kW, 10 teeth, 253,5 mm, Ø 92 mm
5%
Starter motor with reduction 12 V, 4,2 kW, 10 teeth, 253,5 mm, Ø 92 mm
€365,98 €302,46 €347,65 €287,31
 
Brake disc Ø 214,7 mm, thickness 7 mm, 52 teeth
5%
Brake disc Ø 214,7 mm, thickness 7 mm, 52 teeth
€116,52 €96,30 €110,65 €91,45
 
GRANIT Valve stem seal Ford, Case IH, New Holland
GRANIT
Valve stem seal Ford, Case IH, New Holland
€3,77 €3,12
 
Cooling fan Ø 545 mm Case IH, New Holland
5%
Cooling fan Ø 545 mm Case IH, New Holland
Ø: 545 mm. Menke no.: 95216.
€188,42 €155,72 €178,95 €147,89
 
Fan clutch M30 x 2 L, Ø 152,4 mm New Holland, Case IH
5%
Fan clutch M30 x 2 L, Ø 152,4 mm New Holland, Case IH
Weight: 6000 g. Thread: M30 x 2 L. PCD: 152,4 mm. Equipment: 662 Drive. Menke no...
€522,82 €432,08 €496,65 €410,45
 
Electric feed pump without filter 230 l/hour, 0,55 bar
5%
Electric feed pump without filter 230 l/hour, 0,55 bar
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005.
€109,94 €90,86 €104,40 €86,28
 
Handle for- and rear window lock
Handle for- and rear window lock
€34,00 €28,10
 
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
5%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/le...
€32,43 €26,80 €30,80 €25,45
 
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left.
€16,10 €13,31
 
GRANIT Lift rod right 640 - 850 mm, M33 x 3 mm, eye-Ø 24 mm
5%
GRANIT
Lift rod right 640 - 850 mm, M33 x 3 mm, eye-Ø 24 mm
Eye Ø: 24 mm. Thread: M33 x 3 mm. Sleeve length: 280 mm. Length min./max.: 640 -...
€563,50 €465,70 €535,30 €442,40
 
Seal kit Hürlimann, Deutz-Fahr, Steyr
5%
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943.
€78,26 €64,68 €74,30 €61,41
 
GRANIT Sensor driving speed, connection cable with plug MXM, Puma
5%
GRANIT
Sensor driving speed, connection cable with plug MXM, Puma
Version: Sensor - driving speed, Connection cable with plug.
€124,27 €102,70 €118,00 €97,52
 
Sensor getriebeöl temperature
5%
Sensor getriebeöl temperature
Version: Sensor for transmission oil temperature.
€74,78 €61,80 €71,00 €58,68
 
GRANIT Cover for switch cut-off / controls
GRANIT
Cover for switch cut-off / controls
Version: For switch cut-out (fittings).
€17,60 €14,55
 
GRANIT Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
GRANIT
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€10,65 €8,80
 
Temperature sensor 2-pin, M12 x 1,5, 40-100 °C
Temperature sensor 2-pin, M12 x 1,5, 40-100 °C
Version: 2-pin. Thread: M12 × 1.5. Temperature: 40 - 100 °C.
€37,25 €30,79
 
Koppelingslamellenpakket Case IH, New Holland
5%
Koppelingslamellenpakket Case IH, New Holland
€198,26 €163,85 €188,30 €155,62
 
Showing 217 - 240 of 273

New Holland TM130 parts for transmission, cooling and hitch

The New Holland TM130 runs a Full Power Shift transmission, which depends on switches and sensors reporting oil pressure and temperature. When one of them fails, the tractor shifts roughly or flags a warning. This page holds more than 250 New Holland TM130 parts from GRANIT, Scharmüller, ROCKINGER, Cobo and GRAMMER.

Transmission and engine

There are oil pressure switches for the Full Power Shift with connection cable and plug, transmission oil temperature sensors and a starter motor. Around the engine you will find a gasket between exhaust manifold and turbocharger, water pump gaskets, O-rings, sealing rings and seal kits. For cooling there is a fan clutch.

A tip for the exhaust manifold gasket: use new nuts or studs and clean the faces of both manifold and turbo properly. Old fasteners have often stretched from the heat and no longer clamp the gasket evenly. The result is a ticking noise on a cold start and soot around the joint.

At the rear and in the cab

For hitching there are automatic drawbars, Piton Fix and height adjustable adapter plates. Inside the cab there are air suspended tractor seats and gas struts for the rear window, and outside there are headlights and a tank cap.

  • oil pressure switches and transmission sensors
  • starter motor and fan clutch
  • gaskets, O-rings and seal kits
  • drawbar, Piton Fix and adapter plate
  • tractor seat, gas strut and headlights

With a fan clutch, look for oil residue around the hub and play in the bearing. If the fan rocks back and forth with the engine cold and stopped, or there is an oily ring around the clutch, it is due for replacement. A clutch that no longer locks up properly lets the engine run hot on warm days under heavy draft work.

Identifying this exact type

Check the type plate before ordering a sensor or gasket, because the TM series includes many types that look the same from the outside. A cast or printed number on the old part settles it. With switches, also look at the shape of the plug.

The TM130 is part of the New Holland TM series. If you also work on another type from that series, it has its own page:

The TM135 and the TM150 also belong to the TM series. For every New Holland model, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart