Menu
EUR

New Holland TM165 tractor parts & technical data

This page gathers more than 250 parts for the New Holland TM165 from the TM Series. Browse groups such as trailer couplings, electrics and lighting.

258 parts found for New Holland TM165
Show:
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Cobo Multifunction switch built-in horn, lighting, indicator
Cobo
Version: For horn, lights, indicator light, headlight flasher, Connection cable with plug. More
Version: For horn, lights, indicator light, headlight flasher, Connect...
€203,92 €168,53 €187,61 €155,05
You save 8%
Rocker switch EHR rear operation
Version: Rear operation. More
Version: Rear operation.
€82,37 €68,07 €75,78 €62,63
You save 8%
Panclean Cab filter 500 x 85 x 6 mm
€13,39 €11,06
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
Torsion damper Case IH MXM 120 - 155, New Holland TM115 - TM165
Additional information: Made in Germany More
Additional information: Made in Germany
€526,14 €434,83 €484,05 €400,04
You save 8%
Condenser without dryer Fiat, Ford, New Holland
Supplementary set: Without dryer | Weight (kg): 3 | Weight (g): 3000 More
Supplementary set: Without dryer | Weight (kg): 3 | Weight (g): 3000
€962,85 €795,74 €885,82 €732,08
You save 8%
MAHLE Starter motor 12 V, 3,1 kW, 10 teeth, clockwise, mounting Ø 92,0 mm
€530,00 €438,02 €317,44 €262,35
You save 40%
Seal kit hydraulic steering New Holland TM115-TM190
€127,94 €105,74 €117,70 €97,28
You save 8%
Seal kit
€54,95 €45,41
Brake disc Ø 214,7 mm, thickness 7 mm, 52 teeth
€121,59 €100,49 €111,86 €92,45
You save 8%
Thermostat Ø 54 mm, 82 °C
O-ring water pump Ø 56,74 x 3,53 mm Fiat, Ford, New Holland
€3,08 €2,54
V-belt tensioner Ø 74 mm, width 39,5 mm
Outer Ø: 74 mm. Width: 39,5 mm. More
Outer Ø: 74 mm. Width: 39,5 mm.
€192,27 €158,90 €176,89 €146,19
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Turbocharger Fiat, Ford, New Holland, Case IH series M, TM, WDX
€1.547,25 €1.278,72 €1.482,75 €1.225,41
You save 4%
Crankshaft seal Ø 60 x 83 x 11,5 mm Ford, New Holland
Outer Ø: 83 mm. Width: 11,5 mm. Inner Ø: 60 mm. More
Outer Ø: 83 mm. Width: 11,5 mm. Inner Ø: 60 mm.
€7,93 €6,55
Piston clamp dimensions 3 mm (trapeziumvormige ring) / 2,5 mm / 5 mm
Dimensions: Ring dimensions 3 mm (trapezoidal ring) / 2.5 mm / 5 mm. More
Dimensions: Ring dimensions 3 mm (trapezoidal ring) / 2.5 mm / 5 mm.
€164,57 €136,01 €151,40 €125,13
You save 8%
Lock rear window lower
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
Dimensions: 60 x 75 x 8.5 SL mm. More
Dimensions: 60 x 75 x 8.5 SL mm.
€33,17 €27,41 €30,52 €25,22
You save 8%
Gas strut roof window 200 N, 215 mm
Newtons: 200. A: 215 mm. B: 105 mm. C: 6 mm. D: 8 mm. To fit: roof hatch. Form: 8. More
Newtons: 200. A: 215 mm. B: 105 mm. C: 6 mm. D: 8 mm. To fit: roof hat...
€32,35 €26,74
Handle linkage Case IH, Fiat, Ford, New Holland
€147,68 €122,05 €135,87 €112,29
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€952,66 €787,32 €835,29 €690,32
You save 12%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Telescopic mirror bracket right Ø 22 mm, 650 - 950 mm
Ø: 22 mm. Length: 650 mm. Length max.: 950 mm. Installation location: Right. More
Ø: 22 mm. Length: 650 mm. Length max.: 950 mm. Installation location:...
€255,77 €211,38 €235,31 €194,47
You save 8%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
Oil pressure switch engine 1/4" BSP, 0,4 - 0,7 bar, blade terminal 6,3 mm
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade terminal 6.3 mm. Thread: 1/4" BSP. More
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade term...
€19,83 €16,38
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€151,60 €125,29 €139,47 €115,27
You save 8%
Rotary switch fan, without knob, 5 connections
Version: For blower, With 5 blade terminals. More
Version: For blower, With 5 blade terminals.
€67,42 €55,72 €62,03 €51,26
You save 8%
Rear light left / right 235 x 70 x 45 mm, 12 V
Bulb: 12V10WK / R10W, 12V21WK / P21W. Width: 235 mm. Form: Rectangular, short sides rounded. Height: 70 mm. Dimensions W x H x D: 235 x 70 x 45 mm. De... More
Bulb: 12V10WK / R10W, 12V21WK / P21W. Width: 235 mm. Form: Rectangular...
€94,35 €77,98
Seal kit hydraulic steering Case IH, New Holland, Deutz-Fahr
€80,80 €66,78 €74,34 €61,43
You save 8%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm. More
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 4...
€187,43 €154,90 €172,44 €142,51
You save 8%
LUK Torsion damper New Holland TM 115-165
€654,68 €541,06 €602,31 €497,77
You save 8%
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
Water pump with pulley and seal, impeller Ø 117 mm
€279,90 €231,32 €257,51 €212,82
You save 8%
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm. More
Neck Ø: 55 mm.
€19,59 €16,19
Cylinder head gasket engine 675 TA/HJ Fiat, Case IH, New Holland
€115,00 €95,04 €105,80 €87,44
You save 8%
Crankshaft seal rear Ø 122,17 x 140,82 x 12 mm
Outer Ø: 140,82 mm. Width: 12 mm. Inner Ø: 122,17 mm. More
Outer Ø: 140,82 mm. Width: 12 mm. Inner Ø: 122,17 mm.
€67,13 €55,48 €61,76 €51,04
You save 8%
Cylinder head gasket engine 675 TA Ford, Case IH, Fiat, New Holland
€144,03 €119,03 €132,51 €109,51
You save 8%
Showing 97 - 144 of 258

Starting, charging and towing: New Holland TM165 parts

A starter that turns slowly, a charge light that stays on or a trailer sitting at an angle behind the tractor. Those are the jobs this page is set up for, with more than 250 New Holland TM165 parts ranging from alternators to top drawbars.

Measure before you replace

Swapping a starter or alternator is quick work, but it is a waste if the fault was elsewhere. With the engine running, put a multimeter across the battery terminals. If the reading stays low, check the earth strap between engine block and chassis and the battery clamps first. Only once those are sound does the alternator come into question. A starter that only clicks deserves the same treatment, because a poor earth gives exactly that symptom. Always disconnect the battery negative before removing a starter, as the heavy cable on the solenoid is live at all times.

For the TM165 electrics there are alternators, starter motors, oil pressure switches, temperature sensors and headlights.

Hitch at the right height

At the rear there are drawbars, Piton Fix hitches, top drawbars and adapter plates, from Scharmüller and ROCKINGER among others. With an adapter plate that moves up and down, the coupling point on the TM165 can be matched to each trailer until its drawbar sits horizontal. That saves wear on the towing eye and keeps the axle load on the trailer evenly spread. A drawbar running steeply up or down loads one side of the pin all the time, and both pin and eye wear oval much sooner.

Engine, cab and tank

For the engine there are seal kits, O-rings and gaskets, such as the one between exhaust manifold and turbocharger. In the cab you will find tractor seats, including an air suspended seat, and rear window gas struts. Tank caps are on this page too. Choose a vented cap, because without air getting into the tank a vacuum builds up and the engine eventually runs short of fuel.

Next to GRANIT, Scharmüller and ROCKINGER you will also come across Cobo and MAHLE.

Does it fit your TM165

Start at the rating plate and check it reads TM165. The TM series has many similar models, which is why each one has its own page. Alternators and starters usually carry a small plate with a reference number, the easiest thing to compare with the item description.

These TM series tractors each have their own page:

The TM150 and TM175 are part of the same series. For the rest of the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart