Menu
EUR

New Holland TM175 tractor parts & technical data

This page is all about the New Holland TM175 from the TM series. It lists more than 250 parts that fit, among them trailer couplings, electrics and lighting.

257 parts found for New Holland TM175
Show:
GRANIT Gasket rear cover engine 450, 456, 675
GRANIT Exhaust manifold gasket for cylinder head
€33,63 €27,79 €31,90 €26,36
You save 5%
GRANIT Cylinder head bolt 9/16" x 5-1/32" Ford, Fiat, New Holland
GRANIT
Dimensions: 9/16" x 5-1/32" mm. More
Dimensions: 9/16" x 5-1/32" mm.
€12,20 €10,08
GRANIT Handle right and left Case IH, New Holland
€89,49 €73,96 €85,00 €70,25
You save 5%
GRANIT Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
GRANIT
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€10,65 €8,80
GRANIT Flasher unit 12 V, 16 blade connections, with holder
GRANIT
Version: 12 V, with bracket, Control unit for indicator and hazard warning lights, 16 blade terminals. More
Version: 12 V, with bracket, Control unit for indicator and hazard war...
€242,98 €200,81 €230,80 €190,74
You save 5%
Internal plate PTO clutch Ø 140 x 91 mm, 1,8 mm, 32 teeth
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth More
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth
€39,57 €32,70 €37,55 €31,03
You save 5%
GRANIT Pick-up hooks 320 mm, Ø 25 mm, 70 x 59 mm Case IH, New Holland
GRANIT
Width x height (mm): 70 x 59 | Length (mm): 320 | Hole Ø (mm): 25 More
Width x height (mm): 70 x 59 | Length (mm): 320 | Hole Ø (mm): 25
€209,45 €173,10 €198,95 €164,42
You save 5%
GRANIT Torsion damper 14 teeth, profile 35 x 40 Case IH, New Holland, Steyr
GRANIT
Tooth profile: 35X40 | Number of teeth: 14 More
Tooth profile: 35X40 | Number of teeth: 14
€532,79 €440,32 €506,15 €418,31
You save 5%
GRANIT Brake disc Ø 326,7 mm, inner-Ø 60,2 mm, thickness 9,6 mm, 14 teeth
GRANIT
Thickness: 9,6 mm. Number of teeth: 14. Outer Ø: 326,7 mm. Inner Ø: 60,2 mm. More
Thickness: 9,6 mm. Number of teeth: 14. Outer Ø: 326,7 mm. Inner Ø: ...
€207,55 €171,53 €197,15 €162,93
You save 5%
Brake pad lining on one side Case IH, Steyr, New Holland
€34,28 €28,33 €32,55 €26,90
You save 5%
PTO shaft end piece 182,6 mm, 1 3/4 inch 20 grooves, 1000 rpm.
Version: Length 182.6 mm, 1 3/4", 20 grooves, 1000 rpm. More
Version: Length 182.6 mm, 1 3/4", 20 grooves, 1000 rpm.
€245,11 €202,57 €232,85 €192,44
You save 5%
PTO shaft end piece 182,5 mm, 1 3/8 inch 6 grooves, 540 rpm.
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm. More
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm.
€340,02 €281,01 €323,00 €266,94
You save 5%
MAHLE Fan clutch Ø 152 mm Case IH, New Holland
€910,08 €752,13 €568,75 €470,04
You save 38%
Dayco Idler pulley Ø 74 mm, height 39,25 mm New Holland, Case IH
Dayco
Pulley Ø: 74 mm. Height 1: 39,25 mm. Height 2: 39,25 mm. Weight: 0.64 kg. More
Pulley Ø: 74 mm. Height 1: 39,25 mm. Height 2: 39,25 mm. Weight: 0.64...
€102,37 €84,60 €97,25 €80,37
You save 5%
Water pump with gasket, impeller Ø 127 mm Case IH, New Holland
Description: With gasket. More
Description: With gasket.
€219,76 €181,62 €208,75 €172,52
You save 5%
Radiator hose, top Ø 50 mm New Holland, Case IH
€100,07 €82,70 €95,00 €78,51
You save 5%
Electric feed pump Case IH MXM, New Holland TM, TV
€98,74 €81,60 €93,80 €77,52
You save 5%
GRANIT Oil pump engine 675TA Ford, Case IH, Fiat, New Holland
€175,90 €145,37 €167,10 €138,10
You save 5%
Showing 217 - 240 of 257

New Holland TM175 parts

If a New Holland TM175 starts to falter after twenty minutes of work and then fires up again after a rest, look at the fuel cap before the filters. A tank cap with a blocked vent creates a vacuum in the tank and starves the engine. Vented tank caps are among the more than 250 parts on this page for the TM175, supplied by GRANIT, Scharmüller, ROCKINGER, Cobo and GRAMMER.

Engine, switches and sensors

There are oil pressure switches, including ones for the transmission and differential, and temperature sensors. If the oil pressure warning comes on while the engine sounds normal, fit a mechanical gauge in place of the switch. When the pressure is fine, the switch is at fault. Starter motors, viscous fan clutches, the exhaust manifold gasket at the turbocharger and O-rings for the injection pump complete the engine section.

Cab, seat and lights

Gas struts for the rear window and other hatches are available, along with air suspended tractor seats. A rear window that no longer stays open almost always means a worn strut. Replace them in pairs and fit them rod down so the seal stays lubricated. For road work there are headlights. Before fitting a new seat, check the mounting holes on the cab floor and the power supply for the air suspension compressor.

Hitching

The hitch range covers drawbars, adapter plates, Piton Fix rails, top drawbars and automatic hitches. Measure rail width and hole pattern on the frame already on the tractor before ordering a separate part. Piton Fix gives a fixed pin for heavy tankers and tippers, while an automatic hitch speeds up coupling when the work changes through the day. A worn locking pin knocks every time you pull away, so renew it along with the hitch and grease the rail lightly once it is fitted.

Matching the part to your tractor

The type plate on the TM175 shows the model and serial number. Then look for the reference number on the part that comes off and hold it against the product description. For headlights and gas struts, note the exact mounting position too.

The other tractors in the TM series each have a page with their own parts:

The TM135, the TM150 and the rest of the New Holland range are available through the overview of New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart