Menu
EUR

New Holland TN75 tractor parts & technical data

The New Holland TN75 from the TN series has its own page here with more than 200 parts. Browse electrics, steering and front axle parts, couplings and more.

230 parts found for New Holland TN75
Show:
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., taper 1:8, Ø 17,46, left Fiat, New Holland
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Anticlockwise. Line connection suction side: Ø 40mm, 4-Loch, M8. L... More
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€882,58 €729,41 €811,97 €671,05
You save 8%
Bosch/Rexroth Hydraulic pump clockwise 19 cm³/rpm., taper 1:8, Ø 17,46 mm
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Line connection suction side: Ø 40mm, 4-Loch, M8. Line conn... More
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€436,15 €360,45 €401,26 €331,62
You save 8%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.748,75 €1.445,25 €1.382,58 €1.142,63
You save 21%
Scharmüller Support plates ball 80, 3000 kg, 670 x 280 mm, thickness 50 mm Valtra
Scharmüller
suitable for: Valtra. Series: N5-Serie. Category: Support plates. Version: Standard. Thickness: 50 mm. Colour: AGCO grey. Width: 280 mm. D-value: 89,3... More
suitable for: Valtra. Series: N5-Serie. Category: Support plates. Vers...
€1.771,48 €1.464,03 €1.583,40 €1.308,60
You save 11%
Adaptor engine side standard thread M20 / M22
Version: Thread: M20 / M22. More
Version: Thread: M20 / M22.
€29,75 €24,59
Cobo Push button switch built-in make contact 12 V/30 A, 24 V/20 A, IP40
Cobo
Version: For flush mounting, make contact, normally off, 12 V / 30 A inductive, 24 V / 20 A inductive, IP40. Reference no.: 336.019.006. More
Version: For flush mounting, make contact, normally off, 12 V / 30 A i...
€21,41 €17,70
Cobo Socket 3-pin 12/24 V, 2 x 25 A, 1 x 5 A, 2-hole fastening
Cobo
Version: 2-hole fixing 12/24 V, 2 x 25 amps, 1 x 5 amps suitable for plug 22725036200. Number of pins: 3-pin. More
Version: 2-hole fixing 12/24 V, 2 x 25 amps, 1 x 5 amps suitable for p...
€17,35 €14,34
Contact switch gear switch gray, with connector
Version: Grey, connection cable with plug. More
Version: Grey, connection cable with plug.
€137,41 €113,56 €126,42 €104,48
You save 8%
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€24,35 €20,12
Brake reservoir Ford, Case IH, Fiat, Steyr, New Holland
€50,88 €42,05 €46,81 €38,69
You save 8%
Radiator New Holland, Case IH, Steyr
To fit as: New Holland Series TD: 60, 70, 80, 90, 95; Series TK: 65, 70, 75, 76, 80, 85, 90, 95, 100; Series TK-A: TKA80, TKA90, TKA100; Series TN: TN... More
To fit as: New Holland Series TD: 60, 70, 80, 90, 95; Series TK: 65, 7...
€566,06 €467,82 €520,78 €430,39
You save 8%
Connecting rod bearing standard, Ø 63,73 mm
Dimensions: Ø 63.73 mm. More
Dimensions: Ø 63.73 mm.
€12,21 €10,09
Tank cap thread Ø 97 / 100 mm, tank collar Ø 100 mm
Thread Ø mm: 97 / 100. Filler neck Ø: 100 mm. More
Thread Ø mm: 97 / 100. Filler neck Ø: 100 mm.
€40,28 €33,29
Gas strut hood 600 N, 450 mm, stroke 180 mm New Holland
suitable for: Motorhaube. Newtons: 600. A: 450 mm. B: 225 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 180 mm. To fit: Bonnet. More
suitable for: Motorhaube. Newtons: 600. A: 450 mm. B: 225 mm. C: 8 mm....
€57,89 €47,84 €53,26 €44,02
You save 8%
Lifting shaft sealing ring 48 x 65 x 10 mm NBR New Holland, Ford, Fiat
Dimensions: 48.00 x 65.00 x 10.00 mm. Material: NBR. More
Dimensions: 48.00 x 65.00 x 10.00 mm. Material: NBR.
€6,80 €5,62
Bush right lift arm shaft 48 x 53,3 x 35 mm Ford, New Holland, Fiat
Dimensions: 48 x 53.3 x 35 mm. More
Dimensions: 48 x 53.3 x 35 mm.
€28,91 €23,89
Mechanical top link cat. 2, 602 - 822 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. D: 602 / 822 mm. Type: Tail hook/ball joint. Top link type: mechanical. More
A cat.: 2 / 25,4. B cat.: 2 / 25,4. D: 602 / 822 mm. Type: Tail hook/b...
€320,42 €264,81 €294,79 €243,63
You save 8%
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943. More
Reference no.: 47436943.
€81,67 €67,50 €75,14 €62,10
You save 8%
Oil pressure switch engine M12 x 1,5, 0,2 - 0,5 bar, blade terminal 6,3 mm
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade terminal 6.3 mm, Colour: white. To fit: BMW, Mercedes-Benz. More
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade t...
€26,75 €22,11
Angle drive tractormeter side 2 x M16 x 1
Version: Thread: 2 x M16 x 1. More
Version: Thread: 2 x M16 x 1.
€64,09 €52,97 €58,96 €48,73
You save 8%
Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching function: on/off switch with silver contacts/with splash protection cap/spr... More
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switc...
€6,45 €5,33
Plug 4-pin plastic screw connection 16 A, 6 - 24 V
Connection: Schraubanschluss. Power rating max. 24 V: 16 A (1,5 mm2). Current: 16 A. Protection class: IP5K. Nominal voltage: 6 - 24 V. Housing materi... More
Connection: Schraubanschluss. Power rating max. 24 V: 16 A (1,5 mm2). ...
€40,85 €33,76 €37,58 €31,06
You save 8%
BOSCH Micro relays changeover contact 12 V / 30 - 20 A, parallel resistor
BOSCH
Version: 12 V / 30 - 20 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks. More
Version: 12 V / 30 - 20 A, Without bracket, 5-pin, blade terminal 6.3 ...
€17,53 €14,48
Flasher unit 12 V, 16 blade connections, with holder
Version: 12 V, with bracket, Control unit for indicator and hazard warning lights, 16 blade terminals. More
Version: 12 V, with bracket, Control unit for indicator and hazard war...
€253,55 €209,55 €233,27 €192,78
You save 8%
Injection nozzle Case IH JX 65-1095, 80U-100U
Type formula: DLLA132S1320, 0433272997. Bosch no.: 2580433272997. More
Type formula: DLLA132S1320, 0433272997. Bosch no.: 2580433272997.
€46,15 €38,14 €42,46 €35,09
You save 8%
Ring 23 x 40 x 25 mm Fiat L 60-95, New Holland TN55-TN95
Dimensions: 23 x 40 x 25 mm. More
Dimensions: 23 x 40 x 25 mm.
€10,40 €8,60
Signal transmitter temperature thread M16
Version: Temperature, thread: M16. More
Version: Temperature, thread: M16.
€23,84 €19,70
Contact switch green gruppe lever position sensor, with connector
Version: Green, connection cable with plug. More
Version: Green, connection cable with plug.
€142,98 €118,17 €131,54 €108,71
You save 8%
Flasher unit electronic 12 V, 5 blade connections
Version: 12 V, without bracket, 5 blade terminals. More
Version: 12 V, without bracket, 5 blade terminals.
€124,66 €103,02 €114,69 €94,78
You save 8%
Showing 193 - 230 of 230

New Holland TN75 parts for clutch, steering and hydraulics

The New Holland TN75 is a narrow workhorse that clocks up hours between rows, in livestock buildings and around the yard. All that shifting and turning leaves its mark on the clutch, the steering and the hydraulics. This page carries more than 200 New Holland TN75 tractor parts from GRANIT, Cobo, GRAMMER, LUK and HELLA.

Clutch and driveline

For the TN75 there is a double clutch pressure plate, along with thrust bearings for the driving clutch. If the tractor is split anyway, replace the clutch and the thrust bearing in one go and take a look at the flywheel while you are there. Grooves or blue spots on the friction face mean it needs resurfacing first, otherwise the new clutch will slip or judder. A contact switch for the gear lever and a gasket for the rear engine cover belong to the same job.

Steering and hydraulics

A steering cylinder, a hydraulic pump, lifting shaft seals and seal kits keep the steering and the rear linkage dry. A tip for the lifting shaft: smooth and clean the shaft before the new seal goes on and wet the lip with a little oil. A dry lip or a burr on the shaft and the new seal will be weeping again within days.

Electrics and driver's seat

Alternators, relays and oil pressure switches cover the electrical side, and there is a separate O-ring for the thermostat. On the operator platform a GRAMMER Compacto seat fits, and at the rear there is a drawbar and Piton Fix.

  • clutch pressure plate and thrust bearing
  • steering cylinder and hydraulic pump
  • lifting shaft seals
  • alternator, relays and switches
  • seat, drawbar and Piton Fix

An oil pressure light that flickers at idle with a warm engine does not always mean a faulty switch. Check the actual pressure with a separate gauge first. If that reads fine, the switch is to blame and replacing it takes minutes. With the alternator, confirm it is charging with the engine running and check that the drive belt is tight, as a slipping belt can look just like a failed alternator.

Choosing the right part

The type plate confirms that you are dealing with a TN75. If a clutch plate or seal still shows a number, that is the surest comparison, so read it off before the old part goes in the scrap bin.

Within the TN series the New Holland TN95 has its own page too. Other New Holland models are reachable through New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart