Menu
EUR

New Holland TN95 tractor parts & technical data

Own a New Holland TN95 from the TN series? You will find more than 250 matching parts here, covering electrics, lighting, and steering and front axle parts.

276 parts found for New Holland TN95
Show:
Cobo Rear light left 225 x 175 x 60 mm, 12 / 24 V Case IH, New Holland
Cobo
Bulbs included: No | Width (mm): 225 | Bulb: 12V10WK / R10W 12V21WK / P21W | Cable length (m): 1300 | Hole spacing (mm): 60 | Depth (mm): 60 | Type: B... More
Bulbs included: No | Width (mm): 225 | Bulb: 12V10WK / R10W 12V21WK / ...
€56,10 €46,36
As PTO shaft 540 / 750 rpm. Case IH, New Holland, Steyr
€432,35 €357,31 €391,15 €323,26
You save 10%
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 125 mm, 2 grooves
AKS-Dasis
Pulley Ø (mm): 125 | Refrigerant: R 134a | Connection: 1"" x 1"" vertical | Oil quantity (ccm): 200 | Fixing: EM | Additional information: Cylinder h... More
Pulley Ø (mm): 125 | Refrigerant: R 134a | Connection: 1"" x 1"" vert...
€457,34 €377,97 €434,45 €359,05
You save 5%
GRANIT Double clutch 280KGS6, 35 x 40, 14 splines, 327 mm
GRANIT
Dimensions (mm): 35 x 40, 14 grooves | Additional information: Made in Germany More
Dimensions (mm): 35 x 40, 14 grooves | Additional information: Made in...
€671,25 €554,75 €637,65 €526,98
You save 5%
GRANIT Thrust bearing driving clutch single 50 x 80/89 x 22 mm
GRANIT
Dimensions (mm): 50 x 80/89 x 22 More
Dimensions (mm): 50 x 80/89 x 22
€48,82 €40,35 €46,35 €38,31
You save 5%
HELLA Starter motor 12 V, 2,3 kW, 9 teeth, mounting Ø 110 mm, clockwise
€548,69 €453,46 €441,15 €364,59
You save 20%
GRANIT Seal kit hydraulic steering New Holland, Deutz-Fahr
€122,03 €100,85 €115,90 €95,79
You save 5%
Borg Warner Fan clutch Case IH JX 1060 V - 1095 V, New Holland TN60-TN95
€447,94 €370,20 €393,20 €324,96
You save 12%
Bleed valve New Holland TN85, TN95
€39,20 €32,40 €37,20 €30,74
You save 5%
GRANIT Counterweight Case IH JX 90-95, JXU 75-115, MXU 100-130
€1.237,15 €1.022,44 €1.175,25 €971,28
You save 5%
GRANIT Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
GRANIT
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø 52.3 mm, Combustion chamber depth 24 mm, Rings 2.8 (trapezoidal ring) / 2.4 mm /... More
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø ...
€126,41 €104,47 €120,00 €99,17
You save 5%
Optibelt Powerband V-belt 8 grooves without air conditioning and air pressure system
€74,81 €61,83 €71,00 €58,68
You save 5%
GRANIT Lockable fuel filler cap, thread Ø 77 / 82 mm, tank collar Ø 80 mm
GRANIT
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm. More
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm.
€63,16 €52,20 €60,00 €49,59
You save 5%
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
€123,54 €102,10 €117,35 €96,98
You save 5%
GRANIT Idler pulley engine cooling Ø 65 mm Case IH, Steyr, New Holland
€208,57 €172,37 €198,10 €163,72
You save 5%
Adaptor engine side standard thread M20 / M22
Version: Thread: M20 / M22. More
Version: Thread: M20 / M22.
€28,50 €23,55
Cobo Rear light left / right 160 x 67 x 60 mm, hole spacing 57 mm, 12 V
Cobo
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: 4-pin. Width: 160 mm. Form: Rectangular. Height: 67 mm. Cable length: 0.1 m. Hole spacing: 57 mm... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: 4-pin. Width: 16...
€34,61 €28,60 €32,85 €27,15
You save 5%
Showing 241 - 264 of 276

New Holland TN95 parts

A TN95 often handles the daily work around the barn and yard, so maintenance touches very different parts of the tractor. This page holds more than 250 parts that fit it, from GRANIT, Cobo, LUK, MAHLE and GRAMMER.

Lift linkage

For the hydraulic lift there are lifting shaft seals, lift arm shaft bushes and piston sealing rings, which are also listed for Ford and Fiat. Play in the lift arms usually comes from worn bushes. Replace the bushes on both sides and fit new seals at the same time to keep the oil in and the dirt out.

Air conditioning and cab

If you spend long summer days in the cab, you want the air conditioning to work. There are air conditioning compressors and V-belts for the compressor drive. You will also find gas struts for the door, Compacto seats, combined indicator and position lights, tank caps and ball type drawbars. If an indicator and position light only works half the time, check its earth connection first. Keep the drawbar ball lightly greased and put a cap on it when not in use. A squealing compressor belt is loose or glazed and should be replaced.

A tank cap with a blocked vent can make the engine lose power after a while because a vacuum builds up in the tank. A new cap is a quick fix.

Starting, charging and clutch

The electrical side is covered by alternators, starter motors and gear reduction starters. Check the voltage before choosing a starter, as there are versions for twelve and for twenty four volt systems. If unsure, read the plate on the old starter or measure the battery voltage. A new alternator needs a tight belt. Check it again after a few working hours, because new belts stretch a little at first.

For the clutch there are thrust bearings and double clutch assemblies, some from LUK. A thrust bearing that starts to sing when you press the clutch is best replaced in good time, as a seized bearing damages the clutch assembly too.

Choosing the right part

The type plate tells you if it really is a TN95. For seals and bushes, compare the number on the old part with the reference number shown with the product, and check left or right.

Within the TN series, the New Holland TN75 also has its own page. If one sits next to your TN95, order its parts there. For other models from the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart