Menu
EUR

New Holland TS135A tractor parts & technical data

Need something for the New Holland TS135A? Pick from more than 250 parts for this TS-A Series tractor, from trailer couplings to electrics and lighting.

262 parts found for New Holland TS135A
Show:
Push button switch PTO shaft with connection cable and plug
Version: Front PTO operation, Connection cable with plug. More
Version: Front PTO operation, Connection cable with plug.
€193,40 €159,83 €177,93 €147,05
You save 8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€170,59 €140,98 €156,94 €129,70
You save 8%
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Scharmüller
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colour: Kubota grey | Version: Standard | Width (mm): 50 | Length (mm): 24... More
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): ...
€269,09 €222,39 €247,56 €204,60
You save 8%
Seal kit hydraulic steering Case IH, New Holland
€47,79 €39,50 €43,97 €36,34
You save 8%
Ball joint 125 mm, taper 24 - 27 mm, 3/4" x 16 / 1 1/8" x 16
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Taper: 24 - 27 mm. More
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Tap...
€64,90 €53,64 €59,71 €49,35
You save 8%
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
€277,14 €229,04 €254,97 €210,72
You save 8%
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm. More
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€225,87 €186,67 €207,80 €171,74
You save 8%
Scharmüller Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M16. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pat...
€617,18 €510,07 €512,27 €423,37
You save 17%
Turbocharger Steyr, New Holland, Case IH
€1.618,10 €1.337,27 €1.550,65 €1.281,53
You save 4%
Tank cap thread 45 mm
Version: Thread: 45 mm. More
Version: Thread: 45 mm.
€22,91 €18,94
Thermostat gasket Case IH, Steyr, New Holland
€33,42 €27,62 €30,75 €25,41
You save 8%
Air hose inlet manifold inner-Ø 57 / 76 mm, length 94 mm
Inner Ø: 57 / 76 mm. Length: 94 mm. More
Inner Ø: 57 / 76 mm. Length: 94 mm.
€69,05 €57,07 €63,53 €52,50
You save 8%
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
Dimensions: 60 x 75 x 8.5 SL mm. More
Dimensions: 60 x 75 x 8.5 SL mm.
€33,17 €27,41 €30,52 €25,22
You save 8%
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
You save 8%
Fender bracket left complete sprung front axle with brake MXU 100-135
€451,01 €372,74 €414,93 €342,92
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€952,66 €787,32 €835,29 €690,32
You save 12%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Spiegelarm left Case IH, New Holland
€192,61 €159,18 €177,20 €146,45
You save 8%
Wiper motor windshield Case IH, New Holland
€313,64 €259,21 €288,55 €238,47
You save 8%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
Oil pressure switch engine 1/4" BSP, 0,4 - 0,7 bar, blade terminal 6,3 mm
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade terminal 6.3 mm. Thread: 1/4" BSP. More
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade term...
€19,83 €16,38
Sensor driving speed rear axle, connection cable with plug
Version: Driving speed sensor (rear axle housing), Connection cable with plug. More
Version: Driving speed sensor (rear axle housing), Connection cable wi...
€124,37 €102,79 €114,42 €94,56
You save 8%
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€151,60 €125,29 €139,47 €115,27
You save 8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering. More
Version: (Rear operation) lifting and lowering.
€80,49 €66,52 €74,05 €61,20
You save 8%
Cobo Indicator/position light oval PY21W, R5W right
Cobo
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Right. Cable length: 1200 mm. Type: Bulb. More
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation locatio...
€118,81 €98,19 €109,31 €90,33
You save 8%
Contact switch gear switch status LOW black
Version: Status switch, LOW (black). More
Version: Status switch, LOW (black).
€100,19 €82,80 €92,17 €76,18
You save 8%
MANN-FILTER Secondary air filter CF1140/2
€55,33 €45,72
MAHLE Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
€480,04 €396,73 €287,51 €237,61
You save 40%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm. More
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 4...
€187,43 €154,90 €172,44 €142,51
You save 8%
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Wabco
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Threa... More
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed:...
€1.893,95 €1.565,25 €1.742,43 €1.440,03
You save 8%
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
Dayco Belt tensioner Case IH MXU 100-135, Maxxum 100-145, Puma 115-165
€248,94 €205,74 €229,02 €189,28
You save 8%
Dayco Idler pulley Ø 65 mm, height 32 mm, Tector Case IH, Steyr, New Holland
Dayco
Outer Ø: 65 mm. Height: 32 mm. Installation location: Tector. More
Outer Ø: 65 mm. Height: 32 mm. Installation location: Tector.
€144,32 €119,27 €132,77 €109,73
You save 8%
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm. More
Neck Ø: 55 mm.
€19,59 €16,19
Radiator Steyr Profi, New Holland TS, Case IH Farmall, MXU
To fit as: Steyr Serie Profi (4100–6140 Tier 3 and Classic, with or without Serial No Z*BF60001, years 2003–2011), Serie Profi CVT (4110, 4120, 41... More
To fit as: Steyr Serie Profi (4100–6140 Tier 3 and Classic, with or ...
€989,09 €817,43 €909,96 €752,04
You save 8%
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,93 €12,33
Air hose intercooler inner-Ø 57 mm, length 90 mm
Inner Ø: 57 mm. Length: 90 mm. More
Inner Ø: 57 mm. Length: 90 mm.
€43,60 €36,03 €40,11 €33,15
You save 8%
Belt kit 1550 mm, 8 ribs, belt tensioner
Version: For main belt drive. Contents: Belt, belt tensioner. Belt length: 1550 mm. Ribs: 8 n. More
Version: For main belt drive. Contents: Belt, belt tensioner. Belt len...
€47,54 €39,29 €43,74 €36,15
You save 8%
Hinge for rear screen, left Case IH, New Holland
€106,57 €88,07 €98,04 €81,03
You save 8%
Door lock, right Case IH, Steyr, New Holland
Installation location: rechts. More
Installation location: rechts.
€182,19 €150,57 €167,61 €138,52
You save 8%
Lift shaft New Holland T6.120-T7.210
€1.117,14 €923,26 €1.027,77 €849,40
You save 8%
Showing 97 - 144 of 262

New Holland TS135A parts for hitching, cab and controls

Hitching gear, switches and sensors make up much of what this page offers for the New Holland TS135A. In total there are more than 250 replacement parts that fit this tractor, from GRANIT and from makers such as Scharmüller, ROCKINGER, Cobo and Walterscheid.

At the back of the tractor

Hitching parts include automatic drawbars, top drawbars, Piton Fix couplings and height adjustable adapter plates. If you want to run a swinging drawbar instead of a hitch, there are drawbar retrofit kits as well. Measure the rail width and the hole pattern of the parts already on the tractor before ordering, and check which pin your trailers need. On a Piton Fix, inspect the locking pin regularly and keep the mechanism clean. A pin that does not drop fully into its lock is easy to miss until it matters.

Air conditioning and the cab

  • Air conditioning compressors
  • Work lamps
  • Rocker switches for raising and lowering the rear linkage
  • Push button switches and gear switches for the transmission
  • Oil pressure switches and sensors, including one for transmission oil temperature

A simple habit keeps an air conditioning compressor healthy. Run the system for a few minutes every couple of weeks, even in winter. The refrigerant carries oil around the circuit and keeps the compressor seals supple. A compressor that sits unused for months is far more likely to start leaking. Before replacing a sensor, check the plug and wiring for corrosion, since a green contact gives false readings just as reliably as a faulty sensor.

Steering, tank and finding the right part

For the steering there are ball joints, and you will also find tank caps and sealing rings. To check a ball joint, hold it while someone turns the steering wheel back and forth. Any knock or movement you feel means it is worn. Replace it sooner rather than later, as play in the steering soon shows on the road and wears the front tyres unevenly. Have the toe-in checked once the new joint is in.

The type plate tells you whether the tractor is a TS135A, which matters because the models in the TS-A range have very similar names. If the old part has a reference number, check it against the details for each product. For a drawbar or Piton Fix, note the rail width and the diameter of the locking pin, and for a ball joint, the thread and the taper.

The other models in the range each have a page of their own, listing the parts for that exact tractor: New Holland TS100A, New Holland TS110A, New Holland TS115A and New Holland TS125A. For every other model, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart