Menu
EUR

New Holland TVT190 tractor parts & technical data

More than 250 parts for the New Holland TVT190 from the TVT series. Trailer couplings, electrics and lighting are listed on one page for this tractor.

250 parts found for New Holland TVT190
Show:
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€100,84 €83,34 €95,75 €79,13
You save 5%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
You save 12%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.108,13 €915,81 €933,36 €771,37
You save 16%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.221,12 €1.009,19 €1.028,50 €850,00
You save 16%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: Ø 168 x 116 mm. Mount... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€78,40 €64,79
HELLA Rear light right hole spacing 110 mm, 12 V
HELLA
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 mm. Form: Rectangular. Height: 140 mm. Hole spacing: 110 mm. Housing: ... More
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. W...
€95,00 €78,51 €72,75 €60,12
You save 23%
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal.
€8,90 €7,36
HELLA Multifunction relay changeover contact 12 V, 30 - 40 A, 5-pin
HELLA
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks.... More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 ...
€15,85 €13,10
GRANIT Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
GRANIT
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm...
€230,76 €190,71 €208,75 €172,52
You save 10%
Rocker switch dashboard sprung front axle, PTO shaft
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage Sprung front axle Additional control units Reversing system Front PTO More
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage...
€92,65 €76,57 €88,00 €72,73
You save 5%
GRANIT Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€317,36 €262,28 €301,45 €249,13
You save 5%
Carraro Pin upper arm Carraro front axle Ø 37 / 45 / 59,5 mm, length 233 mm
€409,59 €338,50 €389,10 €321,57
You save 5%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °.
€84,40 €69,75 €80,15 €66,24
You save 5%
Carraro Sealing ring 45 x 60 x 5/6,5 mm Carraro front axle
Carraro
Inner Ø: 45 mm. Outer Ø: 60 mm. Thickness: 5/6,5 mm. More
Inner Ø: 45 mm. Outer Ø: 60 mm. Thickness: 5/6,5 mm.
€8,70 €7,19
Wabco Reservoir for antifreeze pump
€106,94 €88,38 €101,55 €83,93
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width: 240 mm. Thickness: 60 mm. Number of heart pins: 2. Heart pin Ø: 32 m... More
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 ...
€2.220,60 €1.835,21
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting. More
Connection: Ø 40 mm press fitting.
€427,72 €353,49 €406,30 €335,79
You save 5%
Showing 73 - 96 of 250

New Holland TVT190 parts for the hitch, cab and engine

A TVT190 spends much of its working life pulling heavy trailers, and the wear shows first in three places: the drawbar, the driver's seat and the switches that get pressed all day long. This page brings together more than 250 replacement parts that fit this New Holland, made by GRANIT, Scharmüller, ROCKINGER, Carraro and GRAMMER among others.

Drawbars and hitch hardware

For the rear end there are automatic drawbars from ROCKINGER and Scharmüller, Piton Fix pins for the hitch rail, top drawbars and height adjustable adapter plates. Together they let you set the hitch at the right height for a tipping trailer or a bale trailer. Before you choose, measure the rail width and the thickness of the locking pin on the hitch you have now. Those two dimensions decide whether a new drawbar slides properly into the guide on your tractor.

In the cab

Inside you will find rocker switches, for instance for the front work lights, and push button switches such as the one for lowering the front linkage. There are air suspended tractor seats from GRAMMER and gas struts for the bonnet and other panels.

A tip on gas struts: change them as a pair even if only one has gone weak. A fresh strut working against a tired one twists the bonnet, and the old one will give up soon anyway. Fit them rod down so the seal stays wetted with oil, which helps them last.

Engine and steering

Engine parts include alternators, V-belts, the water pump gasket and O-rings, for example the one for the oil filler cap. There are also seals, sealing rings and ball joints for the steering. When you replace one ball joint, look at the dust boot on the opposite side too. A split boot lets in water and grit, and that joint will be next.

Matching parts to your TVT190

Start with the rating plate on the tractor. A plate showing TVT190 means this is the page you want. If the old part is already off, look for a number stamped into it or printed on a label and hold it up against the parts on this page. That way the part that arrives is the one you need.

The TVT190 belongs to the TVT series from New Holland. If you also run another tractor from that series, use the page for that exact model, as a part can differ from one model to the next:

Every other tractor from the brand can be reached through New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart