Menu
EUR

Case IH 3230 tractor parts & technical data

Whether you call it the Case IH 3230 or the IHC 3230, the parts are here. Choose from more than 300 items such as lighting, trailer couplings and electrics.

302 parts found for Case IH 3230
Show:
Ball joint 95 mm, M14 x 1,5, 7/8" x 16, taper 15,4 - 18,2 mm
A: 95 mm. C: M14 x 1,5 mm. D: 7/8" x 16 mm. E: 15,4 mm. F: 18,2 mm. Taper: 15,4 - 18,2 mm. More
A: 95 mm. C: M14 x 1,5 mm. D: 7/8" x 16 mm. E: 15,4 mm. F: 18,2 mm. Ta...
€130,40 €107,77 €123,85 €102,36
You save 5%
Carraro Pivot bush 115 x 125 x 42 mm Carraro front axle John Deere, Case IH
Carraro
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm. More
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm.
€72,24 €59,70 €68,60 €56,69
You save 5%
GRANIT Repair set brake cylinder Massey Ferguson, Case IH
€36,41 €30,09 €34,55 €28,55
You save 5%
KS Piston ring set 3 rings Ø 98,43 mm, 3,16 mm / 2,39 mm / 4,75 mm Case IH
KS
Dimensions: 3 rings, Ø 98.43 mm, 3.16 mm (trapezoidal ring) / 2.39 mm / 4.75 mm. More
Dimensions: 3 rings, Ø 98.43 mm, 3.16 mm (trapezoidal ring) / 2.39 mm...
€58,75 €48,55 €55,80 €46,12
You save 5%
VICTOR REINZ Cylinder head gasket set Case IH 474-884, Series 32-4240, Hydro 84
€222,35 €183,76 €211,20 €174,55
You save 5%
Side plate gasket engine block Case IH
€33,99 €28,09 €32,25 €26,65
You save 5%
GRANIT Tank cap new version thread Ø 61 / 69 mm, tank collar Ø 68 mm
GRANIT
Thread Ø mm: 61 / 69. Filler neck Ø: 68 mm. More
Thread Ø mm: 61 / 69. Filler neck Ø: 68 mm.
€34,79 €28,75 €33,00 €27,27
You save 5%
GRANIT Cylinder head bolt 9/16" x 123 mm Case IH
GRANIT
Dimensions: 9/16" x 123 mm. Menke no.: 117911. More
Dimensions: 9/16" x 123 mm. Menke no.: 117911.
€37,00 €30,58
Stop cable for VE pump A 1340 mm, B 1190 mm Case IH 3210-4240
A: 1340 mm. B: 1190 mm. More
A: 1340 mm. B: 1190 mm.
€114,22 €94,40 €108,50 €89,67
You save 5%
GRANIT Crankshaft seal rear Ø 110 x 130 x 13/14 mm Case IH
GRANIT
Outer Ø: 130 mm. Width: 13 / 14 mm. Inner Ø: 110 mm. Menke no.: 63683. More
Outer Ø: 130 mm. Width: 13 / 14 mm. Inner Ø: 110 mm. Menke no.: 6368
€30,00 €24,79
GRANIT Silencer vertical 1330 mm, inner Ø 60 mm, exhaust Ø 45 mm
GRANIT
Version: Length: 1330 mm, Inner Ø: 60 mm, Outlet Ø: 45 mm. Menke no.: 59847. More
Version: Length: 1330 mm, Inner Ø: 60 mm, Outlet Ø: 45 mm. Menke no....
€123,82 €102,33 €117,60 €97,19
You save 5%
Gas strut roof window 160 N, 225 mm, stroke 65 mm John Deere, Case IH
suitable for: Dachluke. Newtons: 160. A: 225 mm. B: 125 mm. C: 6 mm. D: 6 mm. d1: 6 mm. d2: 15 mm. Stroke: 65 mm. Connection 1: AUGE metal. Connection... More
suitable for: Dachluke. Newtons: 160. A: 225 mm. B: 125 mm. C: 6 mm. D...
€32,20 €26,61
Gas strut rear window 180 N, 550 mm Case IH Series 32-4240
suitable for: Heckscheibe. Newtons: 180. A: 550 mm. B: 278 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: rear screen. More
suitable for: Heckscheibe. Newtons: 180. A: 550 mm. B: 278 mm. C: 10 m...
€36,20 €29,92
HELLA Symbol hazard lights red
HELLA
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Warndreieck. More
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalte...
€2,88 €2,38
HELLA Rocker switch on/off 12/24 V, 16 A, 2 blade connections
HELLA
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at 24 V, 2 blade terminals. To operate: Kippbetätigung. Switching function: ohne K... More
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at ...
€20,40 €16,86
HELLA Reflector round red, Ø 85 mm, male thread M5
HELLA
Colour: red | Hole Ø (mm): M5 | Total Ø (mm): 85 | Additional information: With plastic washer; External thread (M5) More
Colour: red | Hole Ø (mm): M5 | Total Ø (mm): 85 | Additional inform...
€13,50 €11,16
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: Ø 168 x 116 mm. Mount... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€78,40 €64,79
HELLA Relays relays make contact 12 V / 50 A, 4-pin, with holder
HELLA
Version: • With resistor for suppressing inductive interference voltage peaks. Colour: Black. Power rating max. 12 V: 50. Protection class: 54. Swit... More
Version: • With resistor for suppressing inductive interference volt...
€20,00 €16,53
GRANIT Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
GRANIT
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€14,20 €11,74
GRANIT External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
GRANIT
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth More
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth
€7,80 €6,45
LUK Clutch plate 280TKCN 1 1/8 inch, 10 splines, sintered Case IH
LUK
Dimensions (inches): 1 1/8"" 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (inches): 1 1/8"" 10 grooves | Material specifications: Sin...
€378,36 €312,69 €342,30 €282,89
You save 10%
SACHS Thrust bearing 60 x 102 x 20,5 mm Case IH 238 - 4240
SACHS
Dimensions (mm): 60 x 102 x 20.5 More
Dimensions (mm): 60 x 102 x 20.5
€95,05 €78,55 €90,25 €74,59
You save 5%
Showing 97 - 120 of 302
Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart