Menu
EUR

Case IH 585 tractor parts & technical data

Known to many as the IHC 585, the Case IH 585 is covered here with more than 250 parts, from lighting and classic tractor parts to steering and front axle.

277 parts found for Case IH 585
Show:
Brake disc Ø 258 mm, 15 teeth, thickness 7,8 mm Case IH
€123,61 €102,16 €113,72 €93,98
You save 8%
VICTOR REINZ Gasket set complete top and bottom engine D-155, D-179 Case IH
€531,86 €439,55 €489,31 €404,39
You save 8%
Gasket front cover engine D-155 - D-358, DT-358, DT-402 Case IH
€37,44 €30,94 €34,44 €28,47
You save 8%
Radiator hose, bottom Ø 50 / 57 mm Case IH 288-995, 3210-4240
€56,24 €46,48 €51,74 €42,76
You save 8%
Radiator hose, top Ø 45 / 50 mm Case IH 288-895, 3210-4240
€102,15 €84,42 €93,98 €77,67
You save 8%
Repair set water pump Case IH
€61,36 €50,71 €56,45 €46,65
You save 8%
Thermostat Ø 54 mm, 82 °C Case IH 3210-4240
Ø: 54 mm. Temperature: 82 °C. More
Ø: 54 mm. Temperature: 82 °C.
€36,11 €29,85
Crankshaft 4-cylinder standard, gear wheel, tooth flank height 10 mm Case IH
Notes: Please follow the installation instructions. Then fill in the test report included and return it to [email protected]. Failure to do s... More
Notes: Please follow the installation instructions. Then fill in the t...
€1.148,19 €948,92 €1.106,33 €914,32
You save 4%
Connecting rod bush Case IH
Cylinder head gasket set upper with valve stem seal Case IH
Additional information: With valve stem seal. More
Additional information: With valve stem seal.
€190,63 €157,55 €175,38 €144,94
You save 8%
Oil pump engine D155, D179 Case IH
€505,38 €417,67 €464,95 €384,26
You save 8%
O-ring Ø 5 mm Case IH
Dimensions: Ø 5 mm. More
Dimensions: Ø 5 mm.
€8,89 €7,35
Injection nozzle Case IH 385-595, 433-733, 440-740, 3210-3230
Type formula: DLLA150S836, 0433271838. Bosch no.: 2580433271838. Menke no.: 54114. More
Type formula: DLLA150S836, 0433271838. Bosch no.: 2580433271838. Menke...
€34,88 €28,82
Filter glass Ø 92,5 x 38 mm, hole Ø 9 mm
Dimensions: Outer Ø 92.5, Hole Ø 9, Height: 38 mm. More
Dimensions: Outer Ø 92.5, Hole Ø 9, Height: 38 mm.
€8,34 €6,89
Threaded spindle 7/8 UNC thread, length 368 mm Case IH
Dimensions: Length = 368, Thread = 7/8" UNC mm. More
Dimensions: Length = 368, Thread = 7/8" UNC mm.
€85,42 €70,60 €78,59 €64,95
You save 8%
Lifting spindle complete 580 - 710 mm, thread 7/8", yoke 27 mm Case IH
Dimensions: Length min. = 580, Length max. = 710, Thread = 7/8", Ø top = 16, Ø bottom = 19, Clevis width = 27 mm. More
Dimensions: Length min. = 580, Length max. = 710, Thread = 7/8", Ø to...
€189,52 €156,63 €174,36 €144,10
You save 8%
Threaded spindle 7/8 UNC thread, length 462 mm Case IH
Dimensions: Length = 462, Thread = 7/8" UNC mm. More
Dimensions: Length = 462, Thread = 7/8" UNC mm.
€114,50 €94,63 €105,34 €87,06
You save 8%
Lifting spindle complete 510 - 630 mm, thread 7/8" IHC 385-885 XL
Dimensions: Length min. = 510, Length max. = 630, Thread = 7/8", Ø top = 16, Ø bottom = 19, Clevis width = 45 mm. More
Dimensions: Length min. = 510, Length max. = 630, Thread = 7/8", Ø to...
€164,40 €135,87 €151,25 €125,00
You save 8%
Adjuster right 565 - 700 mm, Ø 16/19,5 mm Case IH
Dimensions: Length = 565 - 700, Ø top = 16, Ø bottom = 19.5, Clevis inside = 19 mm. More
Dimensions: Length = 565 - 700, Ø top = 16, Ø bottom = 19.5, Clevis ...
€368,94 €304,91 €339,42 €280,52
You save 8%
Rear-view mirror David Brown Case IH Series 32-4240, D 440
€56,34 €46,56 €51,83 €42,84
You save 8%
Mirror Case IH Series 32-4240, D 440
€196,39 €162,31 €180,68 €149,32
You save 8%
Rear light left 199 x 85 x 145 mm, 12 V
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rectangular, short sides rounded. Height: 85 mm. Dimensions W x H x D: 199 x 85 x 1... More
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rec...
€55,71 €46,04 €51,25 €42,36
You save 8%
HELLA Lens, left, 3 light functions, without number plate light
HELLA
Colour: Yellow, red. Installation location: Left. Test mark: E1 116, E1 53345, ECE. Light function: With indicator light, with brake light, with tail ... More
Colour: Yellow, red. Installation location: Left. Test mark: E1 116, E...
€23,51 €19,43
Multifunction relay relays 12 V, 30 - 40 A, 5-pin, 6,3 mm
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks,... More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 ...
€33,86 €27,98 €31,15 €25,74
You save 8%
Thermostat gasket 74702038 Case IH 248-4240
To fit as: Case IH 353, 383, 423, 453, 523, 624, 724, 824, 654, 433, 533, 553, 633, 733, 833, 840, 940, 644, 743, 744, 745, 845, 844, 844S, 946, 1046,... More
To fit as: Case IH 353, 383, 423, 453, 523, 624, 724, 824, 654, 433, 5...
€3,95 €3,26
Filter glass Ø 92,5 x 38 mm, hole Ø 9 mm
Outer Ø: 92.5 mm
Hole Ø: 9 mm
Height: 38 mm
More
Outer Ø: 92.5 mm
Hole Ø: 9 mm
Height: 38 mm
€8,34 €6,89
ZF Oil seal front axle 28 x 45 x 10 mm Case IH
€33,52 €27,70 €30,84 €25,49
You save 8%
ZF Pivot pin Ø 94 mm, thickness 59,5 mm ZF front axle 4472063003
€98,54 €81,44 €90,66 €74,92
You save 8%
Hand brake cable 415 mm, M8 x 1 Case IH
Length: 415 mm. Thread: M8 x 1. Dimensions: Length = 415 mm, Thread M8 x 1. More
Length: 415 mm. Thread: M8 x 1. Dimensions: Length = 415 mm, Thread M8...
€37,44 €30,94
Sealing ring Case IH
Brake plate outer Ø 259,1 mm, inner Ø 206,2 mm, 7 mm thick, 3 teeth
Thickness: 7 mm. Number of teeth: 3. Outer Ø: 259,1 mm. Inner Ø: 206,2 mm. More
Thickness: 7 mm. Number of teeth: 3. Outer Ø: 259,1 mm. Inner Ø: 206...
€89,77 €74,19 €82,59 €68,25
You save 8%
Push rod 182 mm Case IH
Length: 182 mm. More
Length: 182 mm.
€52,71 €43,56
Ring front crankshaft seal Case IH 884, Series 32-4240, E 353-2706
Bush for crankshaft seal, front Case IH 884, Series 32-4240
€161,53 €133,50 €148,61 €122,82
You save 8%
Tank cap new version thread Ø 61 / 69 mm, tank collar Ø 68 mm
Thread Ø mm: 61 / 69. Filler neck Ø: 68 mm. More
Thread Ø mm: 61 / 69. Filler neck Ø: 68 mm.
€36,30 €30,00 €33,40 €27,60
You save 8%
Showing 193 - 240 of 277

Case IH 585 parts for the tractor many still call the IHC 585

Depending on its age, the badge on the bonnet says Case IH 585 or IHC 585. Either way you are dealing with the same tractor, and plenty of them are still earning their keep in the yard and in the field. Keeping one running comes down to cooling, fuel and hydraulics. This page lists more than 250 parts that fit the 585, from GRANIT and from brands including HELLA, LUK, VICTOR REINZ and ZF.

Engine and cooling

When the temperature gauge creeps up, start with the radiator hoses and the by-pass hose. A hose that feels soft or has swollen at the clamp is due for replacement even if it is not leaking yet. You will also find a water pump repair set, a thermostat gasket, a cylinder head gasket set and a crankshaft seal for when the engine comes apart.

When you fit a new thermostat, always renew the gasket and clean both faces properly. Reusing the old gasket is a reliable way to end up with a weeping thermostat housing.

Fuel system and driveline

The fuel side is covered by filter glasses, sealing rings for the fuel filter and an O-ring for the feed pump. After replacing a filter glass or a sealing ring, bleed the system before you start, otherwise the engine will stall or refuse to fire. For the driveline there are clutch plates and universal joints, and the hydraulics are served by a hydraulic pump seal and a complete lifting spindle.

Cab, steering and electrics

If the door no longer stays open, the gas strut has had its day. Play in the steering often comes from worn ball joints, available here in several versions. For the lighting circuit there is a flasher unit.

Unsure which version your tractor needs? Compare the number on the old part with the numbers shown on the product, and check the type plate if you are still in doubt.

Fitting a new clutch plate means splitting the tractor. While it is apart, check the release bearing and the crankshaft seal at the back of the engine. If that seal is damp, oil will reach the new plate and the clutch will soon slip again. The crankshaft seal on this page lets you deal with both in a single job.

Related models in the 85 series

The 585 is one of several models in the 85 series. Each of the others has a page of its own with the parts that fit:

The full brand overview is on the Case IH parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart