Menu
EUR

Case IH 695 tractor parts & technical data

For the Case IH 695, also known as the IHC 695, this page lists more than 200 fitting parts, such as steering and front axle parts, lighting and electrics.

222 parts found for Case IH 695
Show:
HELLA Rocker switch on/off 12/24 V, 16 A, 2 blade connections
HELLA
Rocker switch on/off 12/24 V, 16 A, 2 blade connections
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at 24 V, 2 bl...
€21,31 €17,61
 
Flasher unit electronic 12 V, 6 connections, with holder
8%
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, ...
€50,77 €41,96 €46,71 €38,60
 
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Bulb R10W 12 V, 10 W, BA15s - 10 pieces
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watt...
€18,94 €15,65
 
LUK Clutch kit Case IH 248 - 3434
8%
LUK
Clutch kit Case IH 248 - 3434
Contents: Pressure plate 458128005511, clutch plate 458328017542
€684,66 €565,83 €629,89 €520,57
 
SACHS Thrust bearing 60 x 102 x 20,5 mm Case IH 238 - 4240
8%
SACHS
Thrust bearing 60 x 102 x 20,5 mm Case IH 238 - 4240
Dimensions (mm): 60 x 102 x 20.5
€99,18 €81,97 €91,25 €75,41
 
Elring Cylinder head gasket set with valve stem seal engine D-206, D-239, D-268
8%
Elring
Cylinder head gasket set with valve stem seal engine D-206, D-239, D-268
Additional information: With valve stem seal
€202,15 €167,07 €185,98 €153,70
 
Axial joint 176 mm, M20 x 1,5, M18 x 1,5 L, Ø 52 mm, Ø 35 mm, 25 °
8%
Axial joint 176 mm, M20 x 1,5, M18 x 1,5 L, Ø 52 mm, Ø 35 mm, 25 °
A: 176 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °. Ø B: 52 mm. Ø E: 35 mm.
€76,07 €62,87 €69,98 €57,84
 
Ball joint 255 mm, taper 20 - 22,2 mm, M18 x 1,5, M22 x 1,5
8%
Ball joint 255 mm, taper 20 - 22,2 mm, M18 x 1,5, M22 x 1,5
A: 255 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 2...
€83,90 €69,34 €77,19 €63,79
 
Carraro Pivot bush 115 x 125 x 42 mm Carraro front axle John Deere, Case IH
8%
Carraro
Pivot bush 115 x 125 x 42 mm Carraro front axle John Deere, Case IH
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm.
€75,38 €62,30 €69,35 €57,31
 
O-ring oil pump Case IH
O-ring oil pump Case IH
€2,03 €1,67
 
Bush for nozzle holder brass, injection nozzle Ø 10 mm Case IH
8%
Bush for nozzle holder brass, injection nozzle Ø 10 mm Case IH
Menke no.: 68402.
€48,95 €40,45 €45,03 €37,22
 
Piston set complete Ø 98,43 mm, combustion chamber 56 mm Case IH
8%
Piston set complete Ø 98,43 mm, combustion chamber 56 mm Case IH
Dimensions: 3 rings, Ø 98.43 mm, gudgeon pin Ø 36 x 82 mm, combustion chamber Ø ...
€128,76 €106,41 €118,46 €97,90
 
HELLA Symbol hazard lights red
HELLA
Symbol hazard lights red
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalter Serien 4...
€3,00 €2,48
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
External plate Hi-Lo 1,5 mm, inner 98 mm, outer 125 mm Case IH
External plate Hi-Lo 1,5 mm, inner 98 mm, outer 125 mm Case IH
Version: thickness = 1,5 mm inner = 98 mm outer = 125 mm
€38,48 €31,80
 
External plate PTO shaft 1,6 mm, inner 98,4 mm, outer 139,7 mm, 12 teeth
External plate PTO shaft 1,6 mm, inner 98,4 mm, outer 139,7 mm, 12 teeth
Version: Thickness: 1.6 mm Inner: 98.4 mm Outer: 139.7 mm 12 teeth
€16,58 €13,70
 
External plate PTO clutch 2 mm, inner 98,4 mm, outer 139,7 mm
External plate PTO clutch 2 mm, inner 98,4 mm, outer 139,7 mm
Version: thickness = 2 mm inner = 98,4 mm outer 139,7 mm
€24,78 €20,48
 
HELLA Starter motor 12 V, 1,1 kW, 9 teeth, Ø 74 mm, clockwise
4%
HELLA
Starter motor 12 V, 1,1 kW, 9 teeth, Ø 74 mm, clockwise
€334,60 €276,53 €322,25 €266,33
 
Axial joint 175 mm, M20 x 1,5, M18 x 1,5, 32 °
8%
Axial joint 175 mm, M20 x 1,5, M18 x 1,5, 32 °
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€37,68 €31,14 €34,67 €28,65
 
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
8%
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper: 15,6 - 17...
€62,98 €52,05 €57,94 €47,89
 
VICTOR REINZ Gasket set complete engine D-206 - D-268 Case IH
8%
VICTOR REINZ
Gasket set complete engine D-206 - D-268 Case IH
€420,84 €347,80 €387,17 €319,98
 
Button thread M5 Case IH 784-884, Series 32-4240, D 440
8%
Button thread M5 Case IH 784-884, Series 32-4240, D 440
€35,10 €29,01 €32,29 €26,69
 
Nozzle cap Case IH
8%
Nozzle cap Case IH
€70,08 €57,92 €64,47 €53,28
 
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
 
Connecting rod bearing standard, width 32 mm Case IH
Connecting rod bearing standard, width 32 mm Case IH
Dimensions: Width 32 mm.
€29,81 €24,64
 
HELLA Rocker switch combination switch locks in place, 5 connections 6,3 mm
HELLA
Rocker switch combination switch locks in place, 5 connections 6,3 mm
Version: Without light, 5 blade terminal connections 6.3 mm, 3 switch positions ...
€25,25 €20,87
 
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
Version: For mounting above the number plate, or to the left and right of the nu...
€37,38 €30,89
 
Support right
8%
Support right
€114,60 €94,71 €105,43 €87,13
 
Support left
8%
Support left
€114,60 €94,71 €105,43 €87,13
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth clockwise, Ø 89 mm
40%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth clockwise, Ø 89 mm
€630,00 €520,66 €377,34 €311,85
 
ZF Bush 46 x 50 x 30 mm ZF front axle 4472058002
8%
ZF
Bush 46 x 50 x 30 mm ZF front axle 4472058002
€41,88 €34,61 €38,53 €31,84
 
Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
8%
Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
€81,04 €66,98 €74,56 €61,62
 
Ball joint with axial joint 315 mm, M18 x 1,5, taper 19,9 - 22,25 mm
8%
Ball joint with axial joint 315 mm, M18 x 1,5, taper 19,9 - 22,25 mm
€126,20 €104,30 €116,10 €95,95
 
ZF Differential bevel gear 11 teeth, Ø 50,7 x 20 mm ZF front axle 4475006011
8%
ZF
Differential bevel gear 11 teeth, Ø 50,7 x 20 mm ZF front axle 4475006011
€174,55 €144,26 €160,59 €132,72
 
Center bearing drive shaft 32 x 62 x 37 mm Case IH
8%
Center bearing drive shaft 32 x 62 x 37 mm Case IH
€91,54 €75,65 €84,22 €69,60
 
Axial joint 190 mm, M20 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
8%
Axial joint 190 mm, M20 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 190 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€76,93 €63,58 €70,78 €58,49
 
Carraro Pivot bush 105 x 115 x 44 mm Carraro front axle
8%
Carraro
Pivot bush 105 x 115 x 44 mm Carraro front axle
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm.
€62,31 €51,50 €57,33 €47,38
 
Reservoir Case IH Maxxum 5120-5250, CX 50-100, MX 80C-135
8%
Reservoir Case IH Maxxum 5120-5250, CX 50-100, MX 80C-135
€83,84 €69,29 €77,13 €63,75
 
Showing 49 - 96 of 222

Case IH 695 parts for the axle, engine and PTO

Plenty of these tractors still carry the IHC 695 name on the hood, and it is the same model as the Case IH 695. More than 200 new parts are listed for it here, from GRANIT, ZF, HELLA, Carraro and LUK among others.

Front axle and steering

Axle bearings, axial joints and ball joints cover the front axle and the steering. Play in the steering usually comes from a worn ball joint or axial joint. With the engine running, have someone rock the steering wheel while you watch the joints. If the ball moves in its housing before the wheel responds, it needs replacing.

Engine

  • pistons and piston ring sets for a rebuild
  • crankshaft seal sets
  • O-rings and sealing rings, for example on the feed pump
  • thermostat gaskets
  • brass bushes for the nozzle holders
  • radiator hoses

PTO clutch and electrics

For the PTO clutch there are internal and external plates. Replace them as a full set, and when you strip the pack look for blued or warped plates, which tell you the clutch has been slipping. On the electrical side you will find flasher units and rocker switches.

Matching parts to your 695

The serial plate shows if you have a 695 or a 695 XL, and that difference matters. After that, the old part settles it. Gaskets, plates and joints often have a number on them that you can compare with the product details.

Indicators and switches

If the indicators suddenly flash twice as fast, it is usually a blown bulb rather than a faulty flasher unit. Check every bulb and the earth on the rear lights first. If the fault stays, then the flasher unit is due. When converting to LED lighting, bear in mind that a standard flasher unit does not always cope with it. Rocker switches on the dash wear inside at the contacts. A switch that runs warm or needs flicking several times before the lamp comes on should be replaced. At this age, check the radiator hoses every season for fine cracks at the ends, where they fail first.

When working on the front axle, replace the axle bearings on each side together with the seal next to them. A new bearing behind an old, leaking seal will not last, because dirt and water find their way straight in.

Close relatives

The Case IH 695 XL and the Case IH 895 XL come from the same series and each have a page with the parts for that model, so there is no need to guess which version a part was meant for. The rest of the brand is on Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart