Menu
EUR

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

377 parts found for Case IH CS 75
Show:
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
Rear light, brake light, indicator 95 x 85 x 55 mm, 12 V, left
Dimensions W x H x D: 95 x 85 x 55 mm. Light function: Indicator light, rear light, brake light. Bulb: 12V10WK / R10W, 12V21WK / P21W. Bulbs included:... More
Dimensions W x H x D: 95 x 85 x 55 mm. Light function: Indicator light...
€52,79 €43,63 €50,15 €41,45
You save 5%
HELLA Indicator/position light left 95 x 85 x 54 mm, 12V21WK / R21W Claas
HELLA
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Attachment: Front. Connection: Blade terminal. Width: 95 mm. Form: Rectangular, two s... More
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Attac...
€57,60 €47,60
GRANIT Ball joint taper 24 - 26 mm, 110 mm, M22 x 1,5
GRANIT
Taper (mm): 24 - 26. Length (mm): 110. Screw-in thread (mm): M22 x 1.5. More
Taper (mm): 24 - 26. Length (mm): 110. Screw-in thread (mm): M22 x 1.5...
€96,20 €79,50 €87,00 €71,90
You save 10%
GRANIT Clutch plate 295 28 x 32 mm, 17 splines, MCC lining
GRANIT
Material specifications: MCC clutch lining | Additional information: Made in Germany | Dimensions (mm): 28 x 32 17 grooves More
Material specifications: MCC clutch lining | Additional information: M...
€774,36 €639,97 €735,60 €607,93
You save 5%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, W-connection
MAHLE
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm): 56,0 | Additional information: Dust-tight, with fan, with W connection | Nomi... More
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm...
€525,90 €434,63 €313,00 €258,68
You save 40%
DANA Spicer Synchroniser unit, complete 3de / 4de gear reverse gear
€1.211,72 €1.001,42 €1.151,10 €951,32
You save 5%
Rocker switch dashboard nozzle
Version: Dashboard Control panel Windscreen washer system More
Version: Dashboard Control panel Windscreen washer system
€76,57 €63,28 €72,70 €60,08
You save 5%
MAHLE Air conditioning compressor 12 V, R 134a, pulley-Ø 152 mm, 2 grooves, Rotolock
MAHLE
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Fixing: EM | Oil quantity (ccm): 285 | Pulley Ø (mm): 152 | No. of grooves: 2 | Connection: Rotolock... More
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Fixing: EM | Oil quan...
€653,40 €540,00 €408,35 €337,48
You save 38%
PROBOSS Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
PROBOSS
- Air suspension with 12V compressor - Fore/aft isolator - Continuous height adjustment - Longitudinal adjustment - Backrest tilt adjustment - Mechani... More
- Air suspension with 12V compressor - Fore/aft isolator - Continuous ...
€1.742,40 €1.440,00
King pin lower Carraro front axle 145281
€41,71 €34,47 €39,60 €32,73
You save 5%
Carraro Pivot bush 115 x 125 x 42 mm Carraro front axle John Deere, Case IH
Carraro
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm. More
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm.
€72,24 €59,70 €68,60 €56,69
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
VICTOR REINZ Valve stem seal set Ø 9 x 1,5 mm
€37,35 €30,87
Solenoid switch Case IH, Steyr
€361,06 €298,40 €343,00 €283,47
You save 5%
GRANIT Flame glow plug 12 V, 12,5 A, thread 7/8" - 3/8" UNF Steyr, Case IH
GRANIT
Version: 12 V, 12.5 A, thread 7/8" - 3/8" UNF. More
Version: 12 V, 12.5 A, thread 7/8" - 3/8" UNF.
€33,26 €27,49 €31,55 €26,07
You save 5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Radiator hose, top Ø 50 / 37 mm Steyr, Case IH
Inner Ø: 50 / 37 mm. More
Inner Ø: 50 / 37 mm.
€88,73 €73,33 €84,25 €69,63
You save 5%
Exhaust valve guide Case IH, Steyr, Renault, Fendt
€33,11 €27,36 €31,45 €25,99
You save 5%
GRANIT Piston ring set 3 rings Ø 105 mm, 3 mm trapezoidal ring / 2 mm / 4 mm
GRANIT
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm. More
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm.
€47,65 €39,38 €45,25 €37,40
You save 5%
Showing 121 - 144 of 377

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart