Menu
EUR

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

377 parts found for Case IH CS 75
Show:
GRANIT Connecting rod bearing standard, Ø 63 mm
5%
GRANIT
Connecting rod bearing standard, Ø 63 mm
Dimensions: Ø 63 mm.
€35,34 €29,21 €33,55 €27,73
 
Inlet valve engine MWM TD 226 Case IH, Steyr, Renault
5%
Inlet valve engine MWM TD 226 Case IH, Steyr, Renault
€63,80 €52,73 €60,60 €50,08
 
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
5%
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€99,24 €82,02 €94,25 €77,89
 
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
5%
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€100,84 €83,34 €95,75 €79,13
 
GRANIT Cover gasket crankshaft rear engine MWM D 226, TD 226 Case IH, Steyr
5%
GRANIT
Cover gasket crankshaft rear engine MWM D 226, TD 226 Case IH, Steyr
€59,50 €49,17 €56,50 €46,69
 
Steering valve ew/dw with float position 220 bar, 70 l/min, system SB23OC
5%
Steering valve ew/dw with float position 220 bar, 70 l/min, system SB23OC
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 70 l/m...
€577,47 €477,25 €548,55 €453,35
 
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
16%
Scharmüller
Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.294,08 €1.069,49 €1.089,95 €900,79
 
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
12%
Scharmüller
Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€1.076,56 €889,72 €952,10 €786,86
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
16%
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.221,12 €1.009,19 €1.028,50 €850,00
 
Pressure switch air conditioning with female thread, 2 blade connections
10%
Pressure switch air conditioning with female thread, 2 blade connections
Version: With female thread, 2 blade terminals.
€252,59 €208,75 €228,50 €188,84
 
GRANIT Hand brake switch mechanical M12, 12 V / 24 V, blade connection
GRANIT
Hand brake switch mechanical M12, 12 V / 24 V, blade connection
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal connection.
€19,90 €16,45
 
Alternator 14 V / 95 A, form B, flange 50,8 mm
10%
Alternator 14 V / 95 A, form B, flange 50,8 mm
To fit as: Case IH, McCormick, Steyr
€520,04 €429,79 €470,50 €388,84
 
GRANIT Internal plate differential catch 2,8 mm, 44 - 71,7 mm, 22 teeth
GRANIT
Internal plate differential catch 2,8 mm, 44 - 71,7 mm, 22 teeth
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€15,35 €12,69
 
GRANIT Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
GRANIT
Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€14,20 €11,74
 
GRANIT External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
GRANIT
External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth
€7,80 €6,45
 
GRANIT Shaft seal hydraulic pump Case IH, Steyr
GRANIT
Shaft seal hydraulic pump Case IH, Steyr
€34,60 €28,60
 
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø...
€1.052,10 €869,50
 
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
38%
MAHLE
Alternator 14 V / 120 A, flange 56 mm, form B, fan
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation...
€448,64 €370,78 €280,40 €231,74
 
GRANIT Push button switch linkage lower 12/24 V, Ø 30 mm, green button
5%
GRANIT
Push button switch linkage lower 12/24 V, Ø 30 mm, green button
Version: 12/24 V Green button, external switch on mudguard, Ø 30 mm, 4 blade ter...
€32,06 €26,50 €30,45 €25,17
 
Rocker switch dashboard sprung front axle, PTO shaft
5%
Rocker switch dashboard sprung front axle, PTO shaft
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage Sprung fr...
€92,65 €76,57 €88,00 €72,73
 
LUK Clutch plate 290TDCA 28 x 32 mm, 17 splines, Case IH, Steyr
5%
LUK
Clutch plate 290TDCA 28 x 32 mm, 17 splines, Case IH, Steyr
Dimensions (mm): 28 x 32 17 grooves | Material specifications: Sintered clutch l...
€344,32 €284,56 €327,10 €270,33
 
GRANIT Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
5%
GRANIT
Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
Additional information: With W connection | Charging current (A): 65 | Belt widt...
€138,17 €114,19 €131,25 €108,47
 
Showing 145 - 168 of 377

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart