Menu
EUR

Case IH CS 78 tractor parts & technical data

More than 400 parts make this page a solid starting point for the Case IH CS 78. Lighting, trailer couplings and electrics for the CS series come first.

440 parts found for Case IH CS 78
Show:
O-ring Case IH CS 68-150
Radiator hose for oil cooler Ø 18 mm Case IH C 64-70, CS 68-94
€36,68 €30,31 €34,80 €28,76
You save 5%
GRANIT Radiator hose, bottom Ø 38 mm, length 500 mm Steyr, Case IH
GRANIT
Inner Ø: 38 mm. Length: 500 mm. More
Inner Ø: 38 mm. Length: 500 mm.
€102,15 €84,42 €97,00 €80,17
You save 5%
GRANIT Glow plug 11 V, Ø 20 x 1,5 mm, SW 26 mm Case IH, Steyr
GRANIT
Version: Ø 20 x 1.5, AF 26 mm, 11V. More
Version: Ø 20 x 1.5, AF 26 mm, 11V.
€107,08 €88,50 €101,70 €84,05
You save 5%
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 52 mm. Menke no.: 209000. More
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spa...
€42,99 €35,53 €40,80 €33,72
You save 5%
Injection nozzle Case IH C 64, 70, CS 68-94
Type formula: DLLA151S972, 0433271790. Bosch no.: 2580433271790. More
Type formula: DLLA151S972, 0433271790. Bosch no.: 2580433271790.
€38,78 €32,05 €36,80 €30,41
You save 5%
GRANIT Valve seat outlet valve engine Sisu 320, 420, 620
€72,75 €60,12 €69,10 €57,11
You save 5%
Seal kit ZKD 1,75 mm thick Case IH, Renault, Steyr, Fendt
€140,43 €116,06 €133,40 €110,25
You save 5%
Crankshaft seal for Ø 78 x 100 x 13 mm MVQ MVQ
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Material: MVQ (silicone rubber). More
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Material: MVQ (silico...
€30,20 €24,96
GRANIT Hand throttle cable A 3400 mm, B 3115 mm Case IH, Steyr
GRANIT
A: 3400 mm. B: 3115 mm. More
A: 3400 mm. B: 3115 mm.
€91,27 €75,43 €86,70 €71,65
You save 5%
GRANIT Intake manifold gasket Case IH, Steyr engine Valmet Sisu 420D
€147,28 €121,72 €139,90 €115,62
You save 5%
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€27,90 €23,06
GRANIT Gas strut hood 800 N, 205 mm, stroke 60 mm Case IH, Steyr
€49,08 €40,56 €46,60 €38,51
You save 5%
GRANIT Gas strut door 500 N, 205 mm, stroke 58 mm Case IH, Steyr, New Holland
GRANIT
Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Stroke: 58 mm. d1: 8 mm. d2: 19 mm. To fit: Door. Form: 6. More
Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Stroke: 58 mm. d...
€33,53 €27,71 €31,85 €26,32
You save 5%
GRANIT Windshield frame shock absorber 150 N, 585 mm, stroke 252,5 mm
GRANIT
suitable for: Frontscheibe. Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. d1: 8 mm. d2: 18 mm. Stroke: 252,5 mm. Connection 1: Angle joint w... More
suitable for: Frontscheibe. Newtons: 150. A: 585 mm. B: 290 mm. C: 10 ...
€41,02 €33,90 €38,95 €32,19
You save 5%
Door lock, right Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
Showing 217 - 240 of 440

Case IH CS 78 parts for electrics, hitching and engine

The Case IH CS 78 is well covered here, with more than 400 parts from GRANIT, Scharmüller, HELLA, ROCKINGER and MAHLE. With that many items it helps to know which part of the tractor you are working on, so here is a quick guide by system.

Charging, switches and lighting

If the battery is no longer charging, an alternator is the obvious place to start. In the cab there are rocker switches, for instance for the powershift, and push button switches for the linkage. Work lamps, partly from HELLA, and indicator position lights complete the lighting.

Before you blame the alternator, check the V-belt tension and the earth strap between engine and chassis. A slipping belt or a poor earth produces the same warning light as a failed alternator. Disconnect the battery before you fit the new one.

Drawbars, automatic hitches and adapter plates

For towing there are drawbars and automatic hitches from Scharmüller and ROCKINGER, among others. Height adjustable adapter plates let you set the hitch at the right height for your trailer. Check the pin and jaw of an automatic hitch for wear now and then. A worn pin lets the trailer eye knock when pulling away and braking, and a little grease on the mechanism keeps it locking reliably.

Engine, cooling and cab

For the engine you will find feed pump O-rings, gaskets, injector sealing rings and seal kits. On the cooling side there are radiator hoses and a water pump gasket. Fit fresh clamps with every new hose. Gas struts hold the roof hatch open. Fit them rod down so the seal stays lubricated and the strut keeps its force longer. Thrust bearings are available for the clutch, and one belongs in every clutch job even if the old bearing still runs quietly.

Confirming your model and other CS tractors

The type plate confirms if you have a CS 78. For alternators and switches, compare the reference number on the old part with the numbers shown with the item, since plugs and brackets can vary.

Within the Case IH CS series every model has a page of its own. If you also work on one of these tractors alongside your CS 78, you will find the parts for that type there:

Every other tractor from the brand can be found under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart