Menu
EUR

Case IH CS 78 tractor parts & technical data

More than 400 parts make this page a solid starting point for the Case IH CS 78. Lighting, trailer couplings and electrics for the CS series come first.

440 parts found for Case IH CS 78
Show:
GRANIT Bush axle housing 105 x 115 x 44 mm Case IH
€55,48 €45,85 €52,70 €43,55
You save 5%
Carraro Bronze bearing Ø 38,3 x 34,9 x 34,5 mm Case IH
Carraro
Outer Ø: 38,3 mm. Inner Ø: 34,9 mm. Length: 34,5 mm. More
Outer Ø: 38,3 mm. Inner Ø: 34,9 mm. Length: 34,5 mm.
€6,80 €5,62
Wabco Compressor 159 cm³, 10 bar, Ø 75 mm Case IH CS 68 - CS 100
Wabco
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Thread:... More
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3...
€2.144,12 €1.772,00 €2.036,90 €1.683,39
You save 5%
GRANIT Radiator Case IH CS 78 - CS 100, Steyr M 9000
GRANIT
To fit as:
Case IH CS 78 (1/99–1/04), CS 80 (1/06–), CS 86 (1/99–1/04), CS 90 (1/06–), CS 94 (1/99–1/04), CS 100 (1/06–)
Steyr 9080 M, 9...
More
...
€1.790,16 €1.479,47 €1.700,65 €1.405,50
You save 5%
GRANIT Tension spring engine brake Case IH, Steyr
GRANIT
Description: For engine brake. More
Description: For engine brake.
€8,30 €6,86
Main bearing standard Ø 70 mm Fendt, Case IH, Renault, Steyr
€33,70 €27,85 €32,00 €26,45
You save 5%
GRANIT Bowden cable 2de steering valve 1040 mm Case IH, Steyr
€283,20 €234,05 €269,00 €222,31
You save 5%
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
Steering valve ew/dw with float position 220 bar, 70 l/min, system SB23OC
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 70 l/min, Tightening torque: 30 Nm, Connections: M22 x 1.5, Dimensions: 275 ... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€577,47 €477,25 €548,55 €453,35
You save 5%
GRAMMER Tractor seat Maximo Professional Case IH, Steyr, New Holland
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.503,30 €2.068,84
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
GRANIT
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper, - Application nozzle, - Cleaner, - Cleaning sponge, - Instructions (... More
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - ...
€55,61 €45,96 €52,80 €43,64
You save 5%
Scharmüller Automatic hitch rail width 330 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,2 kN. Colour: Black. Descrip... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.192,59 €985,61 €1.004,51 €830,17
You save 16%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€889,04 €734,74 €748,81 €618,85
You save 16%
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€704,78 €582,46 €623,25 €515,08
You save 12%
Scharmüller Drawbar frame 325/25/26, 2000 kg, black Case IH, Steyr
Scharmüller
To fit as: Case IH Serie CS, CS Pro; Steyr Serie 8000, 9000, 9000M, 9000MT, M9000; More
To fit as: Case IH Serie CS, CS Pro; Steyr Serie 8000, 9000, 9000M, 90...
€1.079,93 €892,50 €909,61 €751,74
You save 16%
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€37,00 €30,58
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
Sensor driving speed 71 mm rear axle housing Case IH, Steyr
Version: 71 mm long (rear axle housing) More
Version: 71 mm long (rear axle housing)
€456,24 €377,06 €433,40 €358,18
You save 5%
GRANIT Double clutch DuT 310/330, 45 x 50 mm, 24 splines, chain pitch 82 mm
GRANIT
Additional information: Made in Germany | Menke no.: 57889 | Dimensions (mm): 45 x 50, 24 grooves | web (mm): 82 More
Additional information: Made in Germany | Menke no.: 57889 | Dimension...
€693,63 €573,25 €658,90 €544,55
You save 5%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, W-connection
MAHLE
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm): 56,0 | Additional information: Dust-tight, with fan, with W connection | Nomi... More
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm...
€525,90 €434,63 €313,00 €258,68
You save 40%
Showing 97 - 120 of 440

Case IH CS 78 parts for electrics, hitching and engine

The Case IH CS 78 is well covered here, with more than 400 parts from GRANIT, Scharmüller, HELLA, ROCKINGER and MAHLE. With that many items it helps to know which part of the tractor you are working on, so here is a quick guide by system.

Charging, switches and lighting

If the battery is no longer charging, an alternator is the obvious place to start. In the cab there are rocker switches, for instance for the powershift, and push button switches for the linkage. Work lamps, partly from HELLA, and indicator position lights complete the lighting.

Before you blame the alternator, check the V-belt tension and the earth strap between engine and chassis. A slipping belt or a poor earth produces the same warning light as a failed alternator. Disconnect the battery before you fit the new one.

Drawbars, automatic hitches and adapter plates

For towing there are drawbars and automatic hitches from Scharmüller and ROCKINGER, among others. Height adjustable adapter plates let you set the hitch at the right height for your trailer. Check the pin and jaw of an automatic hitch for wear now and then. A worn pin lets the trailer eye knock when pulling away and braking, and a little grease on the mechanism keeps it locking reliably.

Engine, cooling and cab

For the engine you will find feed pump O-rings, gaskets, injector sealing rings and seal kits. On the cooling side there are radiator hoses and a water pump gasket. Fit fresh clamps with every new hose. Gas struts hold the roof hatch open. Fit them rod down so the seal stays lubricated and the strut keeps its force longer. Thrust bearings are available for the clutch, and one belongs in every clutch job even if the old bearing still runs quietly.

Confirming your model and other CS tractors

The type plate confirms if you have a CS 78. For alternators and switches, compare the reference number on the old part with the numbers shown with the item, since plugs and brackets can vary.

Within the Case IH CS series every model has a page of its own. If you also work on one of these tractors alongside your CS 78, you will find the parts for that type there:

Every other tractor from the brand can be found under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart