Menu
EUR

Case IH CS 94 tractor parts & technical data

The Case IH CS 94 from the CS Series has more than 450 matching parts on this page. Lighting, trailer couplings and electrics are best represented.

462 parts found for Case IH CS 94
Show:
Steering column switch indicator, horn, dipped beam, main beam
5%
Steering column switch indicator, horn, dipped beam, main beam
Version: Functions: indicators, horn, changeover: dipped beam/full beam Connecti...
€436,07 €360,39 €414,25 €342,36
 
GRANIT Rocker switch dashboard PTO shaft, motoruitschakeling
5%
GRANIT
Rocker switch dashboard PTO shaft, motoruitschakeling
Version: Dashboard Control panel PTO shaft Engine shut-off
€87,12 €72,00 €82,75 €68,39
 
Contact switch brake light, 4 WD, start safety switch
Contact switch brake light, 4 WD, start safety switch
Version: For brake light, four-wheel drive (4 WD), start safety switch
€43,45 €35,91
 
Rocker switch control panel differential catch, airco
5%
Rocker switch control panel differential catch, airco
Version: Control panel Differential lock Speed range, heater, ventilation and ai...
€154,76 €127,90 €147,00 €121,49
 
GRANIT Starter switch 12 / 24 V, 6 blade terminals, M26 x 1,5, 2 keys
5%
GRANIT
Starter switch 12 / 24 V, 6 blade terminals, M26 x 1,5, 2 keys
Version: Operating voltage: 12 V / 24 V With 6 blade terminals (6.3 x 0.8 / 9.5 ...
€70,02 €57,87 €66,50 €54,96
 
SACHS Thrust bearing 106 x 140 x 25 mm
5%
SACHS
Thrust bearing 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€196,98 €162,79 €187,10 €154,63
 
SACHS Thrust bearing 65 x 96 x 23 mm
5%
SACHS
Thrust bearing 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23
€134,70 €111,32 €127,95 €105,74
 
LUK Thrust bearing PTO clutch 106 x 140 x 25 mm
5%
LUK
Thrust bearing PTO clutch 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€216,71 €179,10 €205,85 €170,12
 
GRANIT Clutch plate 330 sintered 28 x 32 mm, 17 splines IHC, Steyr
5%
GRANIT
Clutch plate 330 sintered 28 x 32 mm, 17 splines IHC, Steyr
Menke no.: 57896 | Additional information: Made in Germany | Dimensions (mm): 28...
€241,52 €199,60 €229,40 €189,59
 
GRANIT Thrust bearing driving clutch closed version 65 x 97 x 23 mm
5%
GRANIT
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
Dimensions (mm): 65 x 97 x 23
€79,10 €65,37 €75,10 €62,07
 
Thrust bearing closed version 106 x 140 x 25 mm
5%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€129,08 €106,68 €122,60 €101,32
 
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
5%
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8...
€201,03 €166,14 €190,95 €157,81
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€19,40 €16,03
 
FEBI Fuel filter Ø 84 mm, inner-Ø 19 mm
55%
FEBI
Fuel filter Ø 84 mm, inner-Ø 19 mm
€14,06 €11,62 €6,38 €5,27
 
FEBI Alternator 14 V / 95 A, form B, flange 50,8 mm
65%
FEBI
Alternator 14 V / 95 A, form B, flange 50,8 mm
To fit as: Case IH, McCormick, Steyr
€399,30 €330,00 €141,74 €117,14
 
GRANIT Sealing ring 150 x 180 x 14,5/16 mm Carraro front axle 644662
5%
GRANIT
Sealing ring 150 x 180 x 14,5/16 mm Carraro front axle 644662
€52,43 €43,33 €49,80 €41,16
 
ZF Shim brake Ø 248 mm, thickness 3 mm, inner-Ø 156 mm
5%
ZF
Shim brake Ø 248 mm, thickness 3 mm, inner-Ø 156 mm
€86,39 €71,40 €82,00 €67,77
 
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
 
Showing 241 - 264 of 462

Case IH CS 94 parts and spares

The CS 94 works hard at both ends. At the back, implements are hitched and unhitched every day, and inside the cab the switches, seat and door struts see constant use. This page lists more than 450 replacement parts that fit the Case IH CS 94, made by GRANIT and by suppliers such as Scharmüller, HELLA, ROCKINGER and GRAMMER.

Inside the cab

For the dashboard there are rocker switches, including the powershift switch, and push button switches for raising and lowering the linkage. Gas struts hold the roof hatch, door and rear window open. The seating includes air suspended tractor seats such as the Maximo Professional as well as separate seat cushions, and for night work there are work lamps, including recessed spotlights.

When fitting a new gas strut, mount it with the rod pointing down. That keeps the internal seal bathed in oil, and the strut lasts noticeably longer. If a hatch or door has a strut on each side, always replace them as a pair, otherwise the stronger one twists the frame.

Hitching and the engine bay

At the rear you will find automatic drawbars and height adjustable adapter plates that set the drawbar at the right height in the rail. Before ordering an adapter plate, measure the hole pattern of the plate currently on the tractor.

Under the bonnet there are alternators, radiator hoses, gaskets for the exhaust and inlet manifolds, O-rings for the feed pump, sealing rings and seal kits. For the driveline there are clutch thrust bearings. Radiator hoses are easy to overlook. Squeeze each one with the engine cold. A hose that feels hard and crunchy or soft and spongy is due for replacement, even if it is not leaking yet. Fit new hose clamps at the same time, since old clamps lose their grip.

Getting the right part

Check the type plate first to confirm the tractor is a CS 94 and not another model from the CS series. With switches, compare the symbol and the shape of the button. If the old part carries a reference number, hold it against the product details before you order.

Other CS models each have a page of their own, which is useful if you run more than one: Case IH CS 75, Case IH CS 78, Case IH CS 110 and Case IH CS 120. For every other model from the brand, start at Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart