Menu
EUR

Case IH CVX 1155 tractor parts & technical data

Lighting, trailer couplings and electrics top the list for the Case IH CVX 1155. In total you will find more than 350 parts for this CVX series model.

349 parts found for Case IH CVX 1155
Show:
Electric feed pump without filter 230 l/hour, 0,55 bar
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005. More
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005...
€109,94 €90,86 €104,40 €86,28
You save 5%
Main bearing standard Ø 85 mm
€48,38 €39,98 €45,95 €37,98
You save 5%
Air hose to the intercooler Case IH, New Holland, Steyr
€192,15 €158,80 €182,50 €150,83
You save 5%
Gas strut hood 1900 N, 435 mm, stroke 150 mm
€80,61 €66,62 €76,55 €63,26
You save 5%
Adjustment pin stabilizer Case IH, Steyr
€90,01 €74,39 €85,50 €70,66
You save 5%
Pin stabilizer Case IH, Steyr
€61,95 €51,20 €58,85 €48,64
You save 5%
GRANIT Bush for lower link shaft 66 x 70 x 45 mm Case IH, Steyr
GRANIT
Dimensions: 66 x 70 x 45 mm. More
Dimensions: 66 x 70 x 45 mm.
€115,43 €95,40 €109,65 €90,62
You save 5%
Sealing ring 82 x 6 mm Case IH, Steyr
Dimensions: 82 x 6 mm. More
Dimensions: 82 x 6 mm.
€10,65 €8,80
GRANIT Potentiometer receivers vierwielaangedreven as Carraro
GRANIT
Version: Receiver - four-wheel drive axle (Carraro). More
Version: Receiver - four-wheel drive axle (Carraro).
€259,31 €214,31 €234,60 €193,88
You save 10%
Cobo Work lamp H3, 55 / 70 W, 12 / 24 V, 158 x 96 x 85 mm
Cobo
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Installation location: Right. Nominal voltage: 12 / 24 V. Power consumption: 55 /... More
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. I...
€106,36 €87,90 €101,00 €83,47
You save 5%
Relays changeover contact 12 V, 10 - 20 A, without bracket, 5-pin
Version: 12 V / 10 - 20 A, Without holder, 5-pin, Connection: 3 x 4.8 mm, 2 x 6.3 mm, With parallel resistor to suppress inductive interference voltag... More
Version: 12 V / 10 - 20 A, Without holder, 5-pin, Connection: 3 x 4.8 ...
€18,00 €14,88
Maintenance switch air filter Case IH, New Holland, Steyr
Version: Function: maintenance switch Connection cable with plug connection More
Version: Function: maintenance switch Connection cable with plug conne...
€101,00 €83,47 €95,95 €79,30
You save 5%
GRANIT Direction switch forwards - idle - forwards, 98 g
GRANIT
Version: Forwards - neutral - reverse More
Version: Forwards - neutral - reverse
€466,30 €385,37 €442,95 €366,07
You save 5%
Potentiometer speed control achteruitrijinrichting
Version: For speed control - reversing system More
Version: For speed control - reversing system
€524,75 €433,68
GRANIT Push button switch lift, extern circuit Case IH, New Holland, Steyr
GRANIT
Version: Raise control hydraulics, External switch (on mudguard) More
Version: Raise control hydraulics, External switch (on mudguard)
€42,81 €35,38 €40,65 €33,60
You save 5%
Symbol linkage green Case IH CS 80 - 100, CVX 120 - 1195
Version: Green, lifting unit More
Version: Green, lifting unit
€4,33 €3,58 €4,11 €3,40
You save 5%
GRANIT Rocker switch dashboard front work light
GRANIT
Version: Dashboard Control panel Front headlights More
Version: Dashboard Control panel Front headlights
€93,63 €77,38 €88,90 €73,47
You save 5%
HELLA Alternator 14 V / 95 A, pulley Ø 86 mm, 2 grooves, Case IH, Ford
HELLA
Nominal values (V / A): 14 / 95 | No. of grooves: 2 | Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: With double pulley ... More
Nominal values (V / A): 14 / 95 | No. of grooves: 2 | Charging current...
€476,33 €393,66 €382,95 €316,49
You save 20%
Wabco Cover antifreeze pump Fendt, Massey Ferguson, Case IH
€62,07 €51,30 €58,95 €48,72
You save 5%
Showing 289 - 312 of 349

Case IH CVX 1155 parts for cab, linkage and engine

Long days in a Case IH CVX 1155 show up small faults quickly. A seat that no longer absorbs bumps, a sticky switch, a work lamp that cuts out after dark. This page covers more than 350 replacement parts for the CVX 1155, from GRANIT, Scharmüller, HELLA, Carraro and GRAMMER.

Cab and work lights

For the driving position there is a tractor seat, together with rocker switches and push button switches for the dashboard, among them the switch for the front work lamps. The lamps themselves come as square spotlights for flush mounting. If a lamp flickers, check the plug and the earth connection first, because that is where the fault usually sits.

Gas struts hold the bonnet and the rear window open. When the bonnet starts to drop on its own, new struts are due.

Linkage, engine and hitching

The bush for the lower link shaft is a typical wear item on any tractor that carries heavy mounted implements. Too much play lets the implement sway and wears the shaft and housing as well. Grease the bearing points regularly and renew the bushes as soon as you can feel clear movement.

Around the engine there are water pump gaskets, sealing rings, O-rings, seals and an alternator. A V-belt that squeals or has glazed flanks is better replaced before it snaps in the field.

For coupling up there are drawbars, adapter plates and an automatic hitch.

One more tip on the tractor seat: set the suspension to your own weight and check after the first few working days that the mounting bolts are still tight. A seat set too soft bottoms out over bumps, while one set too hard passes every jolt straight to your back.

Checking the type and the part

The type plate confirms that the tractor is a CVX 1155. After that, the reference number on the old part is a dependable check. For an alternator, compare the flange and pulley too, and for a V-belt read the markings on the old belt.

The other CVX types each have a page listing their own parts. If you run more than one of them, these links take you straight to the right list:

Brand-wide items are collected under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart