Menu
EUR

Case IH CVX 1170 tractor parts & technical data

Working with a Case IH CVX 1170? You will find more than 350 parts for this model here, covering steering and front axle, lighting and trailer couplings.

360 parts found for Case IH CVX 1170
Show:
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.871,87 €1.547,00 €1.544,25 €1.276,24
You save 18%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€39,10 €32,31
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
GRANIT
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€78,15 €64,59 €70,70 €58,43
You save 10%
HELLA Xenon bulb D1S 85 V, 35 W, base Pk32d-2
HELLA
Bulb: D1S / 35W. Power: 35 watts. Socket: Pk32d-2. Voltage: 85 V. More
Bulb: D1S / 35W. Power: 35 watts. Socket: Pk32d-2. Voltage: 85 V.
€109,30 €90,33
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
GRAMMER
Side horizontal suspension: Yes | Upholstery type: Fabric / new design | Armrest: Yes | Included in delivery: Seat supplied with seat contact switch a... More
Side horizontal suspension: Yes | Upholstery type: Fabric / new design...
€5.136,45 €4.245,00 €4.879,60 €4.032,73
You save 5%
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.043,02 €862,00 €838,55 €693,02
You save 20%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€1.024,14 €846,40 €905,70 €748,51
You save 12%
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 148 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€907,50 €750,00 €802,55 €663,26
You save 12%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.441,35 €1.191,20 €1.158,80 €957,69
You save 20%
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.175,21 €971,25 €923,35 €763,10
You save 21%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
ROCKINGER Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
ROCKINGER
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, Lamborghini, Hürlimann. More
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, L...
€1.387,39 €1.146,60 €1.062,30 €877,93
You save 23%
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft. More
Version: Function: position sensor for lifting arm shaft.
€462,84 €382,51 €439,65 €363,35
You save 5%
GRANIT Speed sensor engine- and power take-off speed (for) M18 x 1,5 mm
GRANIT
Version: Function: engine and PTO shaft speed (front), M18 x 1.5 mm, Connection cable with plug connection. More
Version: Function: engine and PTO shaft speed (front), M18 x 1.5 mm, C...
€353,30 €291,98
HELLA Work lamp spotlight H3, 12 / 24 V, square, 182 x 102 x 95 mm, built-in
HELLA
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing: 160 mm. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 182 x 1... More
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing...
€80,85 €66,82
SACHS Damper cab suspension S26X100, 235 mm, eye Ø 12 mm, rear
SACHS
Design: Oil pressure | To fit: CNH, SDF, STEYR, VALMET | Installation location: hinten beidseitig | Length (mm): 235 | Shock absorber mounting type: T... More
Design: Oil pressure | To fit: CNH, SDF, STEYR, VALMET | Installation ...
€166,42 €137,54 €158,00 €130,58
You save 5%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
SANDEN
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP - 15 | No. of grooves: 2 | Reference no.: SD7H15-4478, 86993462, 1999755C2, 19997... More
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP -...
€595,38 €492,05 €565,60 €467,44
You save 5%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
GRANIT Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
€77,66 €64,18 €73,75 €60,95
You save 5%
Bush bridge body Ø 135 x 125 mm, length 42 mm
€72,03 €59,53 €68,40 €56,53
You save 5%
Showing 25 - 48 of 360

Case IH CVX 1170 parts for hitching, engine and cab

A CVX 1170 spends much of its working life pulling heavy trailers and implements, so this page starts at the back of the tractor. It holds more than 350 replacement parts for the Case IH CVX 1170 from makers such as Scharmüller, ROCKINGER, GRANIT, HELLA and Carraro.

Drawbar, Piton Fix and adapter plate

For the hitch rail there are drawbars, a Piton Fix for low hitching and adapter plates that let you mount a different coupling system on the existing rail. Pins and catch hooks wear oval over time. Check the play whenever the tractor is in the yard, because a worn pin sends a jolt through the whole driveline every time you pull away or brake with a loaded trailer.

Steering ball joints are part of the same picture. A joint with play shows up as vague steering and knocking over rough ground.

Engine, linkage and cab

Around the engine you will find water pump gaskets, sealing rings, O-rings such as the one on the oil filler cap, other seals and an alternator. Bushes for the lower link shaft keep the three-point linkage tight. Gas struts for the bonnet or rear window lose force gradually. Where two struts are fitted, replace both, otherwise the panel twists and the new strut ends up carrying the whole load.

In the cab there are rocker switches, including one for the front work lamps, push button switches and a tractor seat. Work lamps come as square spotlights for flush mounting.

A practical point on the alternator: when the charge warning light comes on, check the belt, the battery terminals and the earth strap between engine and frame first. Only when those are in order and the charging voltage is still low is the alternator itself to blame. Disconnect the battery before fitting a new unit.

Getting the right part first time

Confirm on the type plate that the tractor really is a CVX 1170 and compare the reference number on the old part with the new one. With seals and O-rings the fitting position matters as much as the number, so note where the old part came from before throwing it away.

The CVX series includes further types, each with a page of its own. Useful for contractors and farms running several CVX tractors:

Parts that apply across the brand are collected under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart