Menu
EUR

Case IH CVX 1170 tractor parts & technical data

Working with a Case IH CVX 1170? You will find more than 350 parts for this model here, covering steering and front axle, lighting and trailer couplings.

360 parts found for Case IH CVX 1170
Show:
Bosch/Rexroth Hydraulic pump 63 cm³/rpm. clockwise Case IH CVX 140 - 1195
10%
Bosch/Rexroth
Hydraulic pump 63 cm³/rpm. clockwise Case IH CVX 140 - 1195
Output volume (cc/rev): 63 | Direction of rotation: Right
€5.805,05 €4.797,56 €5.252,15 €4.340,62
 
BOSCH Micro relays 12 V / 30 - 20 A, 5-pin, 6,3 mm blade connection
BOSCH
Micro relays 12 V / 30 - 20 A, 5-pin, 6,3 mm blade connection
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 mm
€10,70 €8,84
 
GRANIT Ball head with female thread 263 mm, taper 23,5 - 26,5 mm
5%
GRANIT
Ball head with female thread 263 mm, taper 23,5 - 26,5 mm
A (mm): 263 | D (mm): M24 x 1,5 | Taper (mm): 23,5 - 26,5 | F (mm): 26,5 | E (mm...
€61,58 €50,89 €58,50 €48,35
 
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
66%
FEBI
Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
 
GRANIT Pin lower arm Carraro front axle 145706 Case IH, Renault, Steyr
5%
GRANIT
Pin lower arm Carraro front axle 145706 Case IH, Renault, Steyr
€535,84 €442,84 €509,00 €420,66
 
Elbow lower arm Carraro front axle 145
5%
Elbow lower arm Carraro front axle 145
€178,23 €147,30 €169,30 €139,92
 
Bush 115 x 125 x 44 mm John Deere, Ford, Case IH, New Holland
5%
Bush 115 x 125 x 44 mm John Deere, Ford, Case IH, New Holland
€42,65 €35,25 €40,50 €33,47
 
GRANIT Bush rotary housing and steering cylinder Case IH, Renault, Steyr
5%
GRANIT
Bush rotary housing and steering cylinder Case IH, Renault, Steyr
€67,52 €55,80 €64,10 €52,98
 
GRANIT Bush axle housing 105 x 115 x 44 mm Case IH
5%
GRANIT
Bush axle housing 105 x 115 x 44 mm Case IH
€55,48 €45,85 €52,70 €43,55
 
GRANIT Potentiometer Carraro front axle 145109
5%
GRANIT
Potentiometer Carraro front axle 145109
€246,96 €204,10 €234,60 €193,88
 
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Support plates ball 80, 1142 x 240 mm, 4000 kg
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width:...
€2.220,60 €1.835,21
 
Heating element
5%
Heating element
€233,98 €193,37 €222,25 €183,68
 
Engine preheater, complete connection Ø 40 mm, press
5%
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting.
€427,72 €353,49 €406,30 €335,79
 
GRANIT Tank cap thread 45 mm, for expansion tank
GRANIT
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank.
€16,00 €13,22
 
GRANIT Tension spring engine brake Case IH, Steyr
GRANIT
Tension spring engine brake Case IH, Steyr
Description: For engine brake.
€8,30 €6,86
 
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
5%
GRAMMER
Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: ...
€6.800,20 €5.620,00 €6.460,15 €5.338,97
 
Button Fendt, Case IH
5%
Button Fendt, Case IH
€37,41 €30,92 €35,50 €29,34
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€561,80 €464,30
 
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
12%
Scharmüller
Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
16%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€889,04 €734,74 €748,81 €618,85
 
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
21%
Walterscheid
Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
18%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
 
Scharmüller Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
12%
Scharmüller
Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecting pin: 38 ...
€1.195,30 €987,85 €1.057,10 €873,64
 
Showing 97 - 120 of 360

Case IH CVX 1170 parts for hitching, engine and cab

A CVX 1170 spends much of its working life pulling heavy trailers and implements, so this page starts at the back of the tractor. It holds more than 350 replacement parts for the Case IH CVX 1170 from makers such as Scharmüller, ROCKINGER, GRANIT, HELLA and Carraro.

Drawbar, Piton Fix and adapter plate

For the hitch rail there are drawbars, a Piton Fix for low hitching and adapter plates that let you mount a different coupling system on the existing rail. Pins and catch hooks wear oval over time. Check the play whenever the tractor is in the yard, because a worn pin sends a jolt through the whole driveline every time you pull away or brake with a loaded trailer.

Steering ball joints are part of the same picture. A joint with play shows up as vague steering and knocking over rough ground.

Engine, linkage and cab

Around the engine you will find water pump gaskets, sealing rings, O-rings such as the one on the oil filler cap, other seals and an alternator. Bushes for the lower link shaft keep the three-point linkage tight. Gas struts for the bonnet or rear window lose force gradually. Where two struts are fitted, replace both, otherwise the panel twists and the new strut ends up carrying the whole load.

In the cab there are rocker switches, including one for the front work lamps, push button switches and a tractor seat. Work lamps come as square spotlights for flush mounting.

A practical point on the alternator: when the charge warning light comes on, check the belt, the battery terminals and the earth strap between engine and frame first. Only when those are in order and the charging voltage is still low is the alternator itself to blame. Disconnect the battery before fitting a new unit.

Getting the right part first time

Confirm on the type plate that the tractor really is a CVX 1170 and compare the reference number on the old part with the new one. With seals and O-rings the fitting position matters as much as the number, so note where the old part came from before throwing it away.

The CVX series includes further types, each with a page of its own. Useful for contractors and farms running several CVX tractors:

Parts that apply across the brand are collected under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart