Menu
EUR

Case IH CVX 120 tractor parts & technical data

Maintain your Case IH CVX 120 with parts selected for this type. This page lists more than 300 of them, including lighting, trailer couplings and electrics.

323 parts found for Case IH CVX 120
Show:
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
GRANIT
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€78,15 €64,59 €70,70 €58,43
You save 10%
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
GRAMMER
Side horizontal suspension: Yes | Upholstery type: Fabric / new design | Armrest: Yes | Included in delivery: Seat supplied with seat contact switch a... More
Side horizontal suspension: Yes | Upholstery type: Fabric / new design...
€5.136,45 €4.245,00 €4.879,60 €4.032,73
You save 5%
Bearing pin front axle Ø 50 mm, Ø 35 mm, 63,5 mm, hole spacing 65 mm
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.043,02 €862,00 €838,55 €693,02
You save 20%
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 148 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€907,50 €750,00 €802,55 €663,26
You save 12%
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.175,21 €971,25 €923,35 €763,10
You save 21%
ROCKINGER Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
ROCKINGER
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, Lamborghini, Hürlimann. More
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, L...
€1.387,39 €1.146,60 €1.062,30 €877,93
You save 23%
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft. More
Version: Function: position sensor for lifting arm shaft.
€462,84 €382,51 €439,65 €363,35
You save 5%
GRANIT Speed sensor engine- and power take-off speed (for) M18 x 1,5 mm
GRANIT
Version: Function: engine and PTO shaft speed (front), M18 x 1.5 mm, Connection cable with plug connection. More
Version: Function: engine and PTO shaft speed (front), M18 x 1.5 mm, C...
€353,30 €291,98
HELLA Work lamp spotlight H3, 12 / 24 V, square, 182 x 102 x 95 mm, built-in
HELLA
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing: 160 mm. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 182 x 1... More
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing...
€80,85 €66,82
SACHS Damper cab suspension S26X100, 235 mm, eye Ø 12 mm, rear
SACHS
Design: Oil pressure | To fit: CNH, SDF, STEYR, VALMET | Installation location: hinten beidseitig | Length (mm): 235 | Shock absorber mounting type: T... More
Design: Oil pressure | To fit: CNH, SDF, STEYR, VALMET | Installation ...
€166,42 €137,54 €158,00 €130,58
You save 5%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
SANDEN
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP - 15 | No. of grooves: 2 | Reference no.: SD7H15-4478, 86993462, 1999755C2, 19997... More
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP -...
€595,38 €492,05 €565,60 €467,44
You save 5%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
GRANIT Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
€77,66 €64,18 €73,75 €60,95
You save 5%
Bush bridge body Ø 135 x 125 mm, length 42 mm
€72,03 €59,53 €68,40 €56,53
You save 5%
GRANIT Universal joint 30,2 x 82 mm, maintenance-free
GRANIT
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Main...
€117,59 €97,18 €111,70 €92,31
You save 5%
Gasket exhaust Case IH, Steyr
€43,10 €35,62 €40,90 €33,80
You save 5%
Tank sender fuel gauge CVX 120-195, 1135-1195
Version: Fuel gauge. More
Version: Fuel gauge.
€311,28 €257,26 €281,60 €232,73
You save 10%
Showing 25 - 48 of 323

Case IH CVX 120 parts, sorted by where they sit on the tractor

A CVX 120 rarely stops because of one big failure. More often it is a weeping O-ring on the feed pump, a worn bush on the lower link shaft or a bonnet that will not stay up. This page lists more than 300 parts that fit the Case IH CVX 120, from manufacturers such as GRANIT, Scharmüller, HELLA, Carraro and ROCKINGER. Under the bonnet, at the rear linkage and inside the cab, this is what you can get.

Engine and charging

For the engine bay there are O-rings, sealing rings and seals, among them a seal for a lubrication line and a water pump gasket. If the battery light comes on and stays on, you will find alternators here too, together with V-belts for the auxiliary drives. A belt that squeals on start-up or shows cracks across the ribs is worth replacing before it throws itself off in the field.

Linkage and hitching

The rear of the tractor takes a beating. Bushes for the lift arm shaft wear oval over time, which you notice as play in the lower links. For towing there are drawbars, automatic hitches, adapter plates and Piton Fix hooks.

Cab, switches and lighting

Inside and around the cab you will find gas struts for the bonnet, doors and windows, rocker switches for the dashboard such as the one for the front work lights, tractor seats, and a choice of work lamps.

A word on gas struts from the workshop. They lose pressure slowly, and the first sign is usually a bonnet that sags on a cold morning. Where the bonnet uses two struts, replace both together, otherwise the new one carries the full load and the bonnet twists. Fit the strut with the rod pointing down so the seal stays wetted with oil, and prop the bonnet while you work on the mounts.

Getting the right part first time

Start with the type plate on the tractor. It carries the Typ number, and together with the CVX series name that pins down exactly which machine you have. If the old part is already off, look for a reference number stamped or cast into it. On alternators, struts and gaskets that is often the quickest way to compare old and new.

Running more than one CVX? Each of these tractors has its own page showing only the parts that fit it:

The CVX 175 and CVX 1170 are part of the same series. Everything else from the make is collected under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart