Menu
EUR

Case IH CVX 120 tractor parts & technical data

Maintain your Case IH CVX 120 with parts selected for this type. This page lists more than 300 of them, including lighting, trailer couplings and electrics.

323 parts found for Case IH CVX 120
Show:
Valve cover gasket engine Sisu 320D
Valve cover gasket engine Sisu 320D
€23,40 €19,34
 
Return line Case IH, Steyr
5%
Return line Case IH, Steyr
€531,07 €438,90 €504,50 €416,94
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
16%
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.364,41 €1.127,61 €1.149,20 €949,75
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
16%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€889,04 €734,74 €748,81 €618,85
 
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
12%
Scharmüller
Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 ...
€704,78 €582,46 €623,25 €515,08
 
Scharmüller Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
12%
Scharmüller
Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecting pin: 38 ...
€1.195,30 €987,85 €1.057,10 €873,64
 
GRANIT Temperature sensor engine cooling, thermostat housing
10%
GRANIT
Temperature sensor engine cooling, thermostat housing
Version: Cooling system, Thermostat housing.
€263,40 €217,69 €238,30 €196,94
 
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installa...
€78,40 €64,79
 
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensio...
€37,00 €30,58
 
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
5%
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
Version: Ø 189 mm, thickness: 3.2 mm, 46 splines
€89,03 €73,58 €84,55 €69,88
 
FEBI Feed pump 5 hole, 25/37 mm / 45 mm, flange 52 mm Valtra-Valmet
58%
FEBI
Feed pump 5 hole, 25/37 mm / 45 mm, flange 52 mm Valtra-Valmet
To fit as: Valtra - Valmet 6200, 6300, 6400, 6600, 6800, 8000, 8050, 8150, 8450,...
€164,27 €135,76 €69,09 €57,10
 
Thrust washer Case IH, Renault, Steyr
5%
Thrust washer Case IH, Renault, Steyr
€66,79 €55,20 €63,45 €52,44
 
Bush 115 x 125 x 44 mm John Deere, Ford, Case IH, New Holland
5%
Bush 115 x 125 x 44 mm John Deere, Ford, Case IH, New Holland
€42,65 €35,25 €40,50 €33,47
 
GRANIT Bush axle housing 105 x 115 x 44 mm Case IH
5%
GRANIT
Bush axle housing 105 x 115 x 44 mm Case IH
€55,48 €45,85 €52,70 €43,55
 
GRANIT Potentiometer Carraro front axle 145109
5%
GRANIT
Potentiometer Carraro front axle 145109
€246,96 €204,10 €234,60 €193,88
 
GRANIT Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
5%
GRANIT
Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 209 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm.
€92,00 €76,03 €87,40 €72,23
 
Carraro Bush Ø 44 x 38,5 mm, length 8,9 mm Case IH, New Holland
Carraro
Bush Ø 44 x 38,5 mm, length 8,9 mm Case IH, New Holland
Outer Ø: 44 mm. Inner Ø: 38,5 mm. Length: 8,9 mm.
€16,00 €13,22
 
GRAMMER Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
GRAMMER
Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery typ...
€3.081,10 €2.546,36
 
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Support plates ball 80, 1142 x 240 mm, 4000 kg
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width:...
€2.220,60 €1.835,21
 
Heating element
5%
Heating element
€233,98 €193,37 €222,25 €183,68
 
Engine preheater, complete connection Ø 40 mm, press
5%
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting.
€427,72 €353,49 €406,30 €335,79
 
Showing 73 - 96 of 323

Case IH CVX 120 parts, sorted by where they sit on the tractor

A CVX 120 rarely stops because of one big failure. More often it is a weeping O-ring on the feed pump, a worn bush on the lower link shaft or a bonnet that will not stay up. This page lists more than 300 parts that fit the Case IH CVX 120, from manufacturers such as GRANIT, Scharmüller, HELLA, Carraro and ROCKINGER. Under the bonnet, at the rear linkage and inside the cab, this is what you can get.

Engine and charging

For the engine bay there are O-rings, sealing rings and seals, among them a seal for a lubrication line and a water pump gasket. If the battery light comes on and stays on, you will find alternators here too, together with V-belts for the auxiliary drives. A belt that squeals on start-up or shows cracks across the ribs is worth replacing before it throws itself off in the field.

Linkage and hitching

The rear of the tractor takes a beating. Bushes for the lift arm shaft wear oval over time, which you notice as play in the lower links. For towing there are drawbars, automatic hitches, adapter plates and Piton Fix hooks.

Cab, switches and lighting

Inside and around the cab you will find gas struts for the bonnet, doors and windows, rocker switches for the dashboard such as the one for the front work lights, tractor seats, and a choice of work lamps.

A word on gas struts from the workshop. They lose pressure slowly, and the first sign is usually a bonnet that sags on a cold morning. Where the bonnet uses two struts, replace both together, otherwise the new one carries the full load and the bonnet twists. Fit the strut with the rod pointing down so the seal stays wetted with oil, and prop the bonnet while you work on the mounts.

Getting the right part first time

Start with the type plate on the tractor. It carries the Typ number, and together with the CVX series name that pins down exactly which machine you have. If the old part is already off, look for a reference number stamped or cast into it. On alternators, struts and gaskets that is often the quickest way to compare old and new.

Running more than one CVX? Each of these tractors has its own page showing only the parts that fit it:

The CVX 175 and CVX 1170 are part of the same series. Everything else from the make is collected under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart