Menu
EUR

Case IH CVX 150 tractor parts & technical data

With more than 400 matching items, this range covers the Case IH CVX 150 well. Product groups include lighting, electrics and trailer couplings, among others.

428 parts found for Case IH CVX 150
Show:
Wabco Reservoir for antifreeze pump
€106,94 €88,38 €101,55 €83,93
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width: 240 mm. Thickness: 60 mm. Number of heart pins: 2. Heart pin Ø: 32 m... More
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 ...
€2.220,60 €1.835,21
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting. More
Connection: Ø 40 mm press fitting.
€427,72 €353,49 €406,30 €335,79
You save 5%
GRANIT Connection cable 2,5 m
GRANIT
Length: 2.5 m. Reference no.: 1762625. More
Length: 2.5 m. Reference no.: 1762625.
€79,73 €65,89 €75,70 €62,56
You save 5%
GRANIT Valve seat outlet valve engine Sisu 320, 420, 620
€72,75 €60,12 €69,10 €57,11
You save 5%
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm. More
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€99,24 €82,02 €94,25 €77,89
You save 5%
GRANIT Cylinder head gasket engine Sisu
€79,42 €65,64 €75,40 €62,31
You save 5%
GRANIT Gas strut rear window 200 N, 445 mm, stroke 180,5 mm
GRANIT
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm. D: 8 mm. d1: 8 mm. d2: 18 mm. Stroke: 180,5 mm. Connection 1: Angle joint with... More
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm...
€44,16 €36,50 €41,95 €34,67
You save 5%
GRANIT Gas strut roof window 100 N, 205 mm, stroke 60 mm Case IH, Steyr
GRANIT
suitable for: Dachluke. Newtons: 100. A: 205 mm. B: 124 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 60 mm. To fit: Roof hatch. More
suitable for: Dachluke. Newtons: 100. A: 205 mm. B: 124 mm. C: 8 mm. D...
€46,04 €38,05 €43,70 €36,12
You save 5%
GRANIT Gas strut door 500 N, 205 mm, stroke 58 mm Case IH, Steyr, New Holland
GRANIT
Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Stroke: 58 mm. d1: 8 mm. d2: 19 mm. To fit: Door. Form: 6. More
Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Stroke: 58 mm. d...
€33,53 €27,71 €31,85 €26,32
You save 5%
GRANIT Bearing windshield frame shock absorber Case IH C 42, CVX 1195
€46,22 €38,20 €43,90 €36,28
You save 5%
GRANIT Handle right and left Case IH, Steyr
GRANIT
Installation location: rechts und links. More
Installation location: rechts und links.
€167,81 €138,69 €159,40 €131,74
You save 5%
Gas strut door 500 N, 205 mm Case IH, Steyr, New Holland
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Form: 6. To fit: door. More
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 ...
€36,16 €29,88 €32,70 €27,02
You save 10%
Gas strut for roof hatch 100 N, 275 mm
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof hatch. Form: 6. More
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof h...
€46,65 €38,55 €44,30 €36,61
You save 5%
GRANIT Spring right / left fender Case IH, New Holland, Steyr
€44,04 €36,40 €41,80 €34,55
You save 5%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
GRANIT Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
GRANIT
Length min./max.: 500 - 800 mm. Installation location: left. More
Length min./max.: 500 - 800 mm. Installation location: left.
€260,83 €215,56 €235,95 €195,00
You save 10%
Showing 169 - 192 of 428

Case IH CVX 150 parts from front linkage to drawbar

Walk round a Case IH CVX 150 from the nose to the rear and there is something at every corner that will need replacing sooner or later. This page holds more than 400 parts for this tractor, from GRANIT and from makers such as HELLA, Scharmüller, ROCKINGER and Carraro.

Front end and engine bay

The front linkage is operated with push button switches, such as the green button for lowering. The bonnet is held up by gas struts, and when it drops on its own in the wind or on a slope, they have had their day. Under the bonnet you will find alternators, V-belts, water pump gaskets, O-rings for the feed pump and sealing rings.

Before you condemn an alternator, check the tension and condition of the V-belt and make sure the battery terminals and earth strap are clean and tight. A slipping belt or a poor earth produces exactly the same symptoms as a failed alternator. If it does have to come off, fit a new belt at the same time. A stretched old belt rarely runs true on a fresh pulley.

In and around the cab

Inside there are rocker switches and push buttons for the controls, and tractor seats for long working days. Work lamps come in many shapes, including LED flood beams that light up a wide area around the tractor. On the outside of the cab, combined indicator and position lights complete the picture.

Rear linkage and hitching

At the back it is all about hitching and lifting. There are automatic drawbars, adapter plates to mount a hitch at the right height and bushes for the lower link shaft. A seal for a lubrication line belongs here too.

Which part fits your CVX 150

The CVX 150 belongs to the Case IH CVX range. With so many models and versions in that range, the type plate is your starting point, since it gives the exact model and serial number. The old part usually carries a reference number of its own. On an alternator it is on the unit's own plate, on a gasket it is sometimes pressed into the edge. Compare it with the product description before ordering. For a drawbar or adapter plate, also measure the rail width and hole pattern of what is fitted now.

Other CVX models with their own page:

The CVX 1155 and CVX 1170 are part of the same range. Every other model from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart