Menu
EUR

Case IH CVX 170 tractor parts & technical data

Looking for steering and front axle parts, lighting or a trailer coupling? The Case IH CVX 170 page lists more than 300 matching parts from the CVX series.

347 parts found for Case IH CVX 170
Show:
GRANIT Brake disc Ø 241 mm, thickness 5 mm, 28 teeth
5%
GRANIT
Brake disc Ø 241 mm, thickness 5 mm, 28 teeth
€49,15 €40,62 €46,65 €38,55
 
O-ring Ø 305 x 4 mm Case IH, Steyr
5%
O-ring Ø 305 x 4 mm Case IH, Steyr
€55,96 €46,25 €53,15 €43,93
 
GRANIT Hand brake cable 980 mm Case IH CVX, New Holland TVT, Steyr CVT
5%
GRANIT
Hand brake cable 980 mm Case IH CVX, New Holland TVT, Steyr CVT
Length: 980 mm. Dimensions: Length = 980 mm.
€129,89 €107,35 €123,35 €101,94
 
GRANIT Seal PTO shaft end piece 94 x 118 x 12 mm
5%
GRANIT
Seal PTO shaft end piece 94 x 118 x 12 mm
Version: 94 x 118 x 12 mm.
€100,99 €83,46 €95,90 €79,26
 
Dayco V-belt air brake system 13 mm, 1450 mm
Dayco
V-belt air brake system 13 mm, 1450 mm
Width: 13 mm. Length: 1450 mm.
€26,20 €21,65
 
Gasket manifold for turbocharger 162000110800, 47107834
5%
Gasket manifold for turbocharger 162000110800, 47107834
€31,81 €26,29 €30,20 €24,96
 
GRANIT V-belt for fan Case IH, Landini, New Holland, Steyr, JCB
GRANIT
V-belt for fan Case IH, Landini, New Holland, Steyr, JCB
Version: For fan. Description: For fan.
€29,50 €24,38
 
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm.
€14,60 €12,07
 
Hinge for cab door Case IH, New Holland
5%
Hinge for cab door Case IH, New Holland
€93,97 €77,66 €89,25 €73,76
 
Hinge half for- and rear window lens side Case IH, New Holland
5%
Hinge half for- and rear window lens side Case IH, New Holland
€47,26 €39,06 €44,85 €37,07
 
GRANIT Verbindingsblok for rear screen Case IH, New Holland
5%
GRANIT
Verbindingsblok for rear screen Case IH, New Holland
€38,33 €31,68 €36,40 €30,08
 
GRANIT Gas strut rear window 200 N, 490 mm, ball socket 8 mm
5%
GRANIT
Gas strut rear window 200 N, 490 mm, ball socket 8 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear screen. Form:...
€31,77 €26,26 €30,15 €24,92
 
Pressure sensor 50 bar, thread M12 x 1,5, transmission hydraulic plate
5%
Pressure sensor 50 bar, thread M12 x 1,5, transmission hydraulic plate
Version: Function: gear insertion - hydraulic plate, Thread: M12 x 1.5, Pressure...
€922,92 €762,74 €876,75 €724,59
 
HELLA Socket cigarette lighter 12 V, 10 A
HELLA
Socket cigarette lighter 12 V, 10 A
Version: • Nominal voltage: 12V, • Power rating at 12V: 10A. Nominal voltage: 12...
€41,10 €33,97
 
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
10%
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions...
€55,49 €45,86 €50,20 €41,49
 
Cobo Indicator/position light left / right 120 x 80 x 56 mm, P21W, R5W
Cobo
Indicator/position light left / right 120 x 80 x 56 mm, P21W, R5W
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90 F/S, Agro...
€35,65 €29,46
 
Lever switch for control panel - control unit, with connector
5%
Lever switch for control panel - control unit, with connector
Version: For control panel - control units Connection cable with plug
€699,10 €577,77 €664,10 €548,84
 
GRANIT Pressure switch 1 bar transmission filter Case IH, New Holland, Steyr
GRANIT
Pressure switch 1 bar transmission filter Case IH, New Holland, Steyr
Version: 1 bar, transmission filter contamination indicator
€218,25 €180,37
 
GRANIT Push button switch PTO shaft off, extern circuit, 45 g Case IH, Steyr
5%
GRANIT
Push button switch PTO shaft off, extern circuit, 45 g Case IH, Steyr
Version: PTO shaft off, External switch (on mudguard)
€33,66 €27,82 €31,95 €26,41
 
Showing 313 - 336 of 347

Case IH CVX 170 parts, from the engine bay to the hitch

A squealing belt, a bonnet that drops on your head, play in the lower link shaft. The Case IH CVX 170 has more than 300 parts on this page for exactly those repairs, from brands such as GRANIT, HELLA, GRAMMER, MAHLE and Scharmüller.

Engine bay

Around the engine there is a water pump gasket, O-rings for the feed pump, sealing rings and a seal for a lubrication line. The alternator and V-belts cover the auxiliary drive, and gas struts are available for the bonnet.

Linkage and hitching

At the rear you will find bushes for the lower link shaft, drawbars on a rail, an automatic hitch, top drawbars and adapter plates. That covers both the wear items in the linkage and the complete coupling point for trailers.

Cab and work lights

For the operator there are tractor seats and dashboard rocker switches, such as the one for the front work lights. The work lights themselves are here too, as an H3 spotlight and as a flush-mounted unit.

Gas strut tip

When the bonnet will no longer stay up, replace both gas struts together. A new strut next to a tired one ends up carrying the full load and fades faster. Fit them with the piston rod pointing down so the seal stays in oil, and prop the bonnet securely while you swap them.

Linkage bushes wear quietly. Lift an implement slightly and push it sideways, and if you feel play at the lower link shaft it is time. Replace bushes in pairs on the shaft and grease them after fitting, or a new bush on a dry shaft wears out as quickly as the old one.

Picking the right version

The type plate on the tractor gives the model and serial number, which is what you need to pick the correct part within the CVX range. The reference number on the old part is the next check. On a V-belt the length and profile are often printed on the back, and an alternator carries its own small rating plate.

Other models in the CVX range each have a page with the parts recorded for them:

The CVX 1155 and CVX 1170 also belong to this range. The whole make is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart