Menu
EUR

Case IH CVX 170 tractor parts & technical data

Looking for steering and front axle parts, lighting or a trailer coupling? The Case IH CVX 170 page lists more than 300 matching parts from the CVX series.

347 parts found for Case IH CVX 170
Show:
GRANIT Ball joint 265 mm, taper 23,5 - 26,5 mm, M20 x 1,5, M24 x 1,5
GRANIT
A: 265 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 265 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€91,29 €75,45 €86,70 €71,65
You save 5%
GRANIT Ball joint 430 mm, M22 x 1,5, M22 x 1,5, taper 23 - 25 mm
GRANIT
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper: 23 - 25 mm. More
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper...
€163,50 €135,12 €155,30 €128,35
You save 5%
ZF Shim brake Ø 248 mm, thickness 3 mm, inner-Ø 156 mm
€86,39 €71,40 €82,00 €67,77
You save 5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
Front cover gasket Case IH, New Holland, Steyr
€109,05 €90,12 €103,55 €85,58
You save 5%
Clamp New Holland, Steyr, Case IH
€55,91 €46,21 €53,10 €43,88
You save 5%
GRANIT Tank cap thread 45 mm, for expansion tank
GRANIT
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,00 €13,22
V-belt set Case IH
€19,65 €16,24
Thermostat Ø 54 mm, 79 °C
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€18,95 €15,66
Optibelt V-belt John Deere, New Holland, Case IH
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 52 mm. Menke no.: 209000. More
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spa...
€42,99 €35,53 €40,80 €33,72
You save 5%
GRANIT Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
GRANIT
Dimensions: 85 mm long. More
Dimensions: 85 mm long.
€40,74 €33,67 €38,70 €31,98
You save 5%
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm. More
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm.
€46,69 €38,59 €44,35 €36,65
You save 5%
Intake manifold gasket Massey Ferguson, Case IH, Steyr, New Holland
GRANIT Windshield frame shock absorber 150 N, 585 mm, stroke 252,5 mm
GRANIT
suitable for: Frontscheibe. Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. d1: 8 mm. d2: 18 mm. Stroke: 252,5 mm. Connection 1: Angle joint w... More
suitable for: Frontscheibe. Newtons: 150. A: 585 mm. B: 290 mm. C: 10 ...
€41,02 €33,90 €38,95 €32,19
You save 5%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€32,43 €26,80 €30,80 €25,45
You save 5%
Showing 193 - 216 of 347

Case IH CVX 170 parts, from the engine bay to the hitch

A squealing belt, a bonnet that drops on your head, play in the lower link shaft. The Case IH CVX 170 has more than 300 parts on this page for exactly those repairs, from brands such as GRANIT, HELLA, GRAMMER, MAHLE and Scharmüller.

Engine bay

Around the engine there is a water pump gasket, O-rings for the feed pump, sealing rings and a seal for a lubrication line. The alternator and V-belts cover the auxiliary drive, and gas struts are available for the bonnet.

Linkage and hitching

At the rear you will find bushes for the lower link shaft, drawbars on a rail, an automatic hitch, top drawbars and adapter plates. That covers both the wear items in the linkage and the complete coupling point for trailers.

Cab and work lights

For the operator there are tractor seats and dashboard rocker switches, such as the one for the front work lights. The work lights themselves are here too, as an H3 spotlight and as a flush-mounted unit.

Gas strut tip

When the bonnet will no longer stay up, replace both gas struts together. A new strut next to a tired one ends up carrying the full load and fades faster. Fit them with the piston rod pointing down so the seal stays in oil, and prop the bonnet securely while you swap them.

Linkage bushes wear quietly. Lift an implement slightly and push it sideways, and if you feel play at the lower link shaft it is time. Replace bushes in pairs on the shaft and grease them after fitting, or a new bush on a dry shaft wears out as quickly as the old one.

Picking the right version

The type plate on the tractor gives the model and serial number, which is what you need to pick the correct part within the CVX range. The reference number on the old part is the next check. On a V-belt the length and profile are often printed on the back, and an alternator carries its own small rating plate.

Other models in the CVX range each have a page with the parts recorded for them:

The CVX 1155 and CVX 1170 also belong to this range. The whole make is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart