Menu
EUR

Case IH CVX 175 tractor parts & technical data

More than 300 parts for the Case IH CVX 175 are listed here, with steering and front axle, trailer couplings and electrics among the groups for this CVX model.

322 parts found for Case IH CVX 175
Show:
Carraro Seal front axle 180 x 150 x 14,5/16 mm John Deere, Case IH
€65,64 €54,25 €62,35 €51,53
You save 5%
Carraro Sealing ring 45 x 60 x 5/6,5 mm Carraro front axle
Carraro
Inner Ø: 45 mm. Outer Ø: 60 mm. Thickness: 5/6,5 mm. More
Inner Ø: 45 mm. Outer Ø: 60 mm. Thickness: 5/6,5 mm.
€8,70 €7,19
Carraro Pivot bush 105 x 115 x 44 mm Carraro front axle
Carraro
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm. More
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm.
€59,71 €49,35 €56,70 €46,86
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width: 240 mm. Thickness: 60 mm. Number of heart pins: 2. Heart pin Ø: 32 m... More
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 ...
€2.220,60 €1.835,21
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting. More
Connection: Ø 40 mm press fitting.
€427,72 €353,49 €406,30 €335,79
You save 5%
GRANIT Valve seat outlet valve engine Sisu 320, 420, 620
€72,75 €60,12 €69,10 €57,11
You save 5%
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm. More
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€99,24 €82,02 €94,25 €77,89
You save 5%
GRANIT Cylinder head gasket engine Sisu
€79,42 €65,64 €75,40 €62,31
You save 5%
GRANIT Gas strut rear window 200 N, 445 mm, stroke 180,5 mm
GRANIT
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm. D: 8 mm. d1: 8 mm. d2: 18 mm. Stroke: 180,5 mm. Connection 1: Angle joint with... More
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm...
€44,16 €36,50 €41,95 €34,67
You save 5%
GRANIT Gas strut door 500 N, 205 mm, stroke 58 mm Case IH, Steyr, New Holland
GRANIT
Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Stroke: 58 mm. d1: 8 mm. d2: 19 mm. To fit: Door. Form: 6. More
Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Stroke: 58 mm. d...
€33,53 €27,71 €31,85 €26,32
You save 5%
GRANIT Bearing windshield frame shock absorber Case IH C 42, CVX 1195
€46,22 €38,20 €43,90 €36,28
You save 5%
GRANIT Handle right and left Case IH, Steyr
GRANIT
Installation location: rechts und links. More
Installation location: rechts und links.
€167,81 €138,69 €159,40 €131,74
You save 5%
Gas strut door 500 N, 205 mm Case IH, Steyr, New Holland
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Form: 6. To fit: door. More
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 ...
€36,16 €29,88 €32,70 €27,02
You save 10%
GRANIT Spring right / left fender Case IH, New Holland, Steyr
€44,04 €36,40 €41,80 €34,55
You save 5%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
GRANIT Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
GRANIT
Length min./max.: 500 - 800 mm. Installation location: left. More
Length min./max.: 500 - 800 mm. Installation location: left.
€260,83 €215,56 €235,95 €195,00
You save 10%
Showing 121 - 144 of 322

Case IH CVX 175 parts for engine, linkage and controls

The Case IH CVX 175 is a tractor that clocks up hours, and the wear is spread across the whole machine. This page brings together more than 300 parts for the type, from GRANIT and from Scharmüller, HELLA, Carraro and GRAMMER.

On a tractor that works this many hours, replacing parts before they fail is often wiser than waiting for a breakdown. An alternator that occasionally stops charging, a switch that sometimes sticks or a bush with the first signs of play are all signals to act before you are stuck in the middle of the season. When you replace an alternator, renew the drive belt too if its flanks are glazed or cracked.

Controls in the cab

The cab has push buttons, such as a green one for lowering the front linkage, and rocker switches in the dashboard for the front work lights. Work lamps are available separately. For the driver there are tractor seats, among them an air suspended Maximo Dynamic and a PROBOSS seat, plus gas struts for doors and windows.

Engine and charging

Engine parts include alternators, gaskets such as the one for the water pump, and O-rings for the oil filler cap. When you replace a water pump gasket, clean work is half the job. Scrape every trace of the old gasket off both faces and avoid sealant unless the gasket is meant to be used with it, because loose bits can end up in the cooling system.

Linkage and lubrication

Around the lift arm shaft there are bushes, for example one for the lower link shaft, along with sealing rings and pins, including an upper pin. Seals for the lubrication lines keep the grease system tight. A lift arm with sideways play usually means worn bushes. Replace them on both sides at once, or the new bush will soon wear at an angle. At the rear, drawbars with a K80 ball and adapter plates complete the hitch side.

Getting it right first time

The type plate tells you whether the tractor is a CVX 175. After that the reference number on the old part settles it. The CVX 175 belongs to the Case IH CVX range, and other types from it have their own pages: Case IH CVX 130, Case IH CVX 140, Case IH CVX 150, Case IH CVX 160, Case IH CVX 170 and Case IH CVX 195. The remaining tractors of the make are under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart