Menu
EUR

Case IH CVX 195 tractor parts & technical data

Steering and front axle parts top the list for the Case IH CVX 195, joined by trailer couplings and electrics for a total of more than 300 matching items.

326 parts found for Case IH CVX 195
Show:
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
5%
GRAMMER
Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
Side horizontal suspension: Yes | Upholstery type: Fabric / new design | Armrest...
€5.136,45 €4.245,00 €4.879,60 €4.032,73
 
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
20%
ROCKINGER
Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.043,02 €862,00 €838,55 €693,02
 
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
12%
Scharmüller
Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 k...
€1.024,14 €846,40 €905,70 €748,51
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
PROBOSS Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
PROBOSS
Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€1.333,40 €1.101,98
 
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
12%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€907,50 €750,00 €802,55 €663,26
 
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
21%
Walterscheid
Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.175,21 €971,25 €923,35 €763,10
 
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
ROCKINGER Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
23%
ROCKINGER
Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, Lamborghini...
€1.387,39 €1.146,60 €1.062,30 €877,93
 
Position sensor linkage for lower link shaft
5%
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft.
€462,84 €382,51 €439,65 €363,35
 
GRANIT Speed sensor engine- and power take-off speed (for) M18 x 1,5 mm
GRANIT
Speed sensor engine- and power take-off speed (for) M18 x 1,5 mm
Version: Function: engine and PTO shaft speed (front), M18 x 1.5 mm, Connection ...
€353,30 €291,98
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
5%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP - 15 | No. o...
€595,38 €492,05 €565,60 €467,44
 
GRANIT Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
5%
GRANIT
Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
€77,66 €64,18 €73,75 €60,95
 
Bush bridge body Ø 135 x 125 mm, length 42 mm
5%
Bush bridge body Ø 135 x 125 mm, length 42 mm
€72,03 €59,53 €68,40 €56,53
 
Gasket exhaust Case IH, Steyr
5%
Gasket exhaust Case IH, Steyr
€43,10 €35,62 €40,90 €33,80
 
Scharmüller Automatic hitch rail width 330 mm, coupling pin 38 mm
16%
Scharmüller
Automatic hitch rail width 330 mm, coupling pin 38 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.192,59 €985,61 €1.004,51 €830,17
 
Tank sender fuel gauge CVX 120-195, 1135-1195
10%
Tank sender fuel gauge CVX 120-195, 1135-1195
Version: Fuel gauge.
€311,28 €257,26 €281,60 €232,73
 
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
10%
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€90,28 €74,61 €81,65 €67,48
 
MANN-FILTER Hydraulics- / getriebeöl filters WH980/3, HF6553
41%
MANN-FILTER
Hydraulics- / getriebeöl filters WH980/3, HF6553
€67,02 €55,39 €39,85 €32,93
 
Universal joint 30,2 x 83 / 88 mm, maintenance-free
5%
Universal joint 30,2 x 83 / 88 mm, maintenance-free
€166,62 €137,70 €158,25 €130,79
 
Showing 25 - 48 of 326

Case IH CVX 195 parts by area of the tractor

More than 300 replacement parts on this page fit the Case IH CVX 195. They come from GRANIT and from makers such as Scharmüller, HELLA, Carraro and GRAMMER, and they are easiest to understand by the part of the tractor they belong to.

Rear linkage and hitch

For hitching there are drawbars that fit the rail, adapter plates to set the drawbar at the correct height, and pins for the linkage. The lower link shaft runs in bushes, and after years of lifting these wear oval. You notice it as an implement that sways from side to side or hangs crooked on the linkage. Press out the old bushes, clean the bore thoroughly and give the new bush a light coat of grease before pressing it in. Keep it greased afterwards and the linkage will stay tight for a long time.

Front linkage and cab

For the front linkage there are push button switches, including the button for quick lowering. The dashboard uses rocker switches, for example for the front work lights, and there are work lamps for the lights themselves. Gas struts for doors and windows and tractor seats for the operator complete this area.

Engine bay

Engine parts include alternators, multi-rib belts and the water pump gasket, along with sealing rings, O-rings such as the one for the oil filler cap, and seals for the lubrication line. To check a multi-rib belt, twist a section over and look at the ribs. A few fine cross cracks are a warning, missing chunks of rubber mean it has to come off now. While the belt is off, spin the tensioner pulley by hand. If it feels rough or has play, replace it too, because a dragging pulley wears out a new belt quickly.

Use the type plate to confirm the tractor is a CVX 195. If the old part shows a reference number, compare it with the product details. For bushes, measure the inner and outer diameter and the width, and for switches, match the symbol on the button.

Other models from the CVX series have their own pages, which helps if you run more than one: Case IH CVX 130, Case IH CVX 140, Case IH CVX 150, Case IH CVX 160, Case IH CVX 170 and Case IH CVX 175. Everything else from the brand starts at Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart