Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH CX 70 tractor parts & technical data

Find more than 250 parts for the Case IH CX 70 in one place. Electrics, trailer couplings and lighting are sorted by group, which saves you cross-checking.

248 parts found for Case IH CX 70
Show:
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper: 15,6 - 17,9 mm. More
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper:...
€62,98 €52,05 €57,94 €47,89
You save 8%
Thermostat Ø 54 mm, 83 °C Case IH
Ø: 54 mm. Temperature: 83 °C. More
Ø: 54 mm. Temperature: 83 °C.
€29,73 €24,57
Oil sump gasket 210 x 600 x 2 mm engine Perkins 4.212
Dimensions: 210 x 600 x 2 mm. More
Dimensions: 210 x 600 x 2 mm.
€8,35 €6,90
Feed pump including gasket 4 bores, hole spacing 25 x 44 mm
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 44 mm, Flange to lever end: 34 mm. More
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacin...
€40,18 €33,21 €36,97 €30,55
You save 8%
Gas strut roof window 160 N, 225 mm, stroke 65 mm John Deere, Case IH
suitable for: Dachluke. Newtons: 160. A: 225 mm. B: 125 mm. C: 6 mm. D: 6 mm. d1: 6 mm. d2: 15 mm. Stroke: 65 mm. Connection 1: AUGE metal. Connection... More
suitable for: Dachluke. Newtons: 160. A: 225 mm. B: 125 mm. C: 6 mm. D...
€33,61 €27,78
Handle rear window lock Case IH, New Holland
€72,70 €60,08 €66,88 €55,28
You save 8%
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
You save 8%
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 102 kN. Load capacity: 4 t. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.431,83 €1.183,33 €1.103,20 €911,74
You save 23%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.820,72 €1.504,73 €1.439,48 €1.189,65
You save 21%
HD-telescopic mirror bracket left Ø 19 mm, 420 - 665 mm Case IH
Ø: 19 mm. Length: 420 mm. Length max.: 665 mm. Installation location: Left. More
Ø: 19 mm. Length: 420 mm. Length max.: 665 mm. Installation location:...
€143,36 €118,48 €131,89 €109,00
You save 8%
Oil pressure switch engine M10 x 1, blade connection
Version: Thread: M10 x 1, Blade terminal. More
Version: Thread: M10 x 1, Blade terminal.
€35,44 €29,29
HELLA Rocker switch on/off 12/24 V, 16 A, 2 blade connections
HELLA
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at 24 V, 2 blade terminals. To operate: Kippbetätigung. Switching function: ohne K... More
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at ...
€21,31 €17,61
Cobo Indicator/position light 120 x 80 x 56 mm, P21W, R5W right
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Side. Width: 120 mm. Form: Rectangular. Height: 80 mm. Dimensions W x H x D: 12... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment:...
€46,69 €38,59 €42,95 €35,50
You save 8%
HELLA Relays relays make contact 12 V / 50 A, 4-pin, with holder
HELLA
Version: • With resistor for suppressing inductive interference voltage peaks. Colour: Black. Power rating max. 12 V: 50. Protection class: 54. Swit... More
Version: • With resistor for suppressing inductive interference volt...
€20,91 €17,28
Maintenance switch koelvloeistofpeil Case IH CX 50 - MX 170 Maxxum
Version: For coolant level Connection cable with plug More
Version: For coolant level Connection cable with plug
€204,29 €168,83 €187,95 €155,33
You save 8%
Clutch plate single clutch 35 x 41 mm, 10 splines Case IH
Additional information: Made in Germany | Dimensions (mm): 35 x 41 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 35 x 41 10 ...
€377,53 €312,01 €347,33 €287,05
You save 8%
MAHLE Alternator 14 V, 65 A, pulley-Ø 75 mm Case IH, McCormick
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Form: A | Belt width (mm) / type: (2x) 9,7 | Charging current (A): 65 | Mounting L / d / R (mm)... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Form: A | Belt ...
€395,61 €326,95 €236,95 €195,83
You save 40%
MAHLE Starter motor 12 V, 2,8 kW, 10 teeth, 253 mm, clockwise
€462,79 €382,47 €277,18 €229,08
You save 40%
Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
Potentiometer Carraro front axle 145109
€257,70 €212,98 €237,08 €195,94
You save 8%
Carraro Pivot bush 105 x 115 x 44 mm Carraro front axle
Carraro
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm. More
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm.
€62,31 €51,50 €57,33 €47,38
You save 8%
Reservoir Case IH Maxxum 5120-5250, CX 50-100, MX 80C-135
€83,84 €69,29 €77,13 €63,75
You save 8%
GRAMMER Seat Maximo Professional MSG95AL/731, 530 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.506,09 €2.071,15
Inlet/outlet gasket Case IH C 70-90, CX 70-100, MX 80C-90C
€51,88 €42,88 €47,73 €39,45
You save 8%
V-belt air conditioning Case IH, Steyr
Version: For air conditioning system. Description: For air conditioning system. More
Version: For air conditioning system. Description: For air conditionin...
€19,25 €15,91
V-belt set without idler pulley Case IH CX 70-100, MX 80C-90C
Version: Without idler pulley. More
Version: Without idler pulley.
€37,19 €30,73
Radiator cap grommet-Ø 57 mm, height 27 mm
Neck Ø: 57 mm. Height: 27 mm. More
Neck Ø: 57 mm. Height: 27 mm.
€12,54 €10,36
Needle bearing oil pump Ø 30 x 34 x 16 mm
Dimensions: Ø 30 x 34 x 16 mm. More
Dimensions: Ø 30 x 34 x 16 mm.
€14,78 €12,21
Hydraulic pump Case IH
€730,16 €603,44 €671,75 €555,16
You save 8%
GRAMMER Tractor seat Maximo Professional Case IH, Steyr, New Holland
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.553,31 €2.110,17
Gas strut hood 880 N, 585 mm, stroke 240 mm Case IH 6381MT, MX 90C
Newtons: 880. A: 585 mm. B: 293 mm. C: 10 mm. D: 10 mm. Stroke: 240 mm. d1: 10 mm. d2: 22 mm. To fit: Bonnet. Form: 6. More
Newtons: 880. A: 585 mm. B: 293 mm. C: 10 mm. D: 10 mm. Stroke: 240 mm...
€82,11 €67,86 €75,54 €62,43
You save 8%
Gas strut door 350 N, 250 mm, stroke 66 mm Case IH CX 50, MX 90C
suitable for: Tür. Newtons: 350. A: 250 mm. B: 125 mm. C: 13 mm. D: 13 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 66 mm. To fit: Door. More
suitable for: Tür. Newtons: 350. A: 250 mm. B: 125 mm. C: 13 mm. D: 1...
€51,70 €42,73 €47,56 €39,31
You save 8%
Gas strut door 350 N, 250 mm Case IH CX 50, MX 90C
Newtons: 350. A: 250 mm. B: 125 mm. C: 13 mm. D: 13 mm. To fit: door. Form: 6. More
Newtons: 350. A: 250 mm. B: 125 mm. C: 13 mm. D: 13 mm. To fit: door. ...
€45,69 €37,76 €42,03 €34,74
You save 8%
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.122,48 €927,67 €864,85 €714,76
You save 23%
HD-telescopic mirror bracket right Ø 19 mm, 400 - 660 mm Case IH
Ø: 19 mm. Length: 400 mm. Length max.: 660 mm. Installation location: Right. More
Ø: 19 mm. Length: 400 mm. Length max.: 660 mm. Installation location:...
€143,36 €118,48 €131,89 €109,00
You save 8%
Potentiometer rotary function linkage position and werkelijke value
Version: For power lift for position and actual value, Connection cable with plug connection. More
Version: For power lift for position and actual value, Connection cabl...
€239,17 €197,66 €220,04 €181,85
You save 8%
HELLA Lens with indicator light, brake light, reflector, rear light left / right
HELLA
Installation location: Right, left. Test mark: E12 3024, E12 6081, E12 7111, ECE. Light function: With indicator light, with brake light, with reflect... More
Installation location: Right, left. Test mark: E12 3024, E12 6081, E12...
€25,10 €20,74
Start safety relay 12 V, 70 A, 4-pin, blade terminal 6,3 mm
Version: 12 V / 70 A, With bracket, 4-pin, blade terminal 6.3 mm. More
Version: 12 V / 70 A, With bracket, 4-pin, blade terminal 6.3 mm.
€22,49 €18,58
Radiator cap Ø 58 mm, height 25,5 mm Ford, Case IH, New Holland
To fit as: Ford 2000, 5000, 2100, 5100, 7100, 2300, 2600, 3600, 4600, 5600, 7600, 5610, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8010, 82... More
To fit as: Ford 2000, 5000, 2100, 5100, 7100, 2300, 2600, 3600, 4600, ...
€16,00 €13,22
Showing 97 - 144 of 248

Case IH CX 70 parts

A front PTO switch that has stopped working, a cab door that drops or a track rod end with play. These are the jobs a Case IH CX 70 regularly brings into the workshop. This page lists more than 250 parts for this tractor, from GRANIT, HELLA, ROCKINGER, MAHLE and Walterscheid.

Cab doors, windows and mirrors

For the cab there are door hinges, gas struts for the side, front or rear window and heavy duty telescopic mirror brackets. A door that sags usually has a worn upper hinge, and that also stops the lock from closing properly. Fit a gas strut with the rod pointing down, so the seal stays lubricated and the strut lasts longer.

Switches, relays and four wheel drive

Plenty of functions on the CX 70 run through switches and relays. You will find rocker switches, such as the one for the front PTO, rotary switches, relays with holders and individual symbols like the hazard light insert. For the four wheel drive there is a potentiometer for the receiver on the Carraro axle.

When a function stops, test the relay before you replace the switch. Swap it with an identical relay from another circuit and see whether the fault moves. It saves time and an unnecessary order.

Steering, engine and three point linkage

At the front axle, ball joints and axial joints wear. Before removing the old track rod end, measure the length of the track rod and set the new one to the same length. Toe-in will then be close, and you can fine tune it afterwards. Always use a new split pin or locking nut.

Around the engine there are sealing rings, including the front crankshaft seal, as well as O-rings and starter motors. When fitting a new crankshaft seal, check whether the old one has worn a groove into the shaft. If so, press the new seal in slightly deeper or shallower so the lip runs on an undamaged surface. The rear end is covered by drawbars plus pins for the three point linkage.

Matching the part to your tractor

The type plate shows the model and serial number. Write them down before ordering. Some parts, such as a door hinge, are listed for several Case IH models, including the CX 50-100 and MX 80C-90C. If in doubt, compare the number on the old part with the reference number shown with the product.

The CX range also includes the Case IH CX 80, the Case IH CX 90 and the Case IH CX 100, each with its own parts list. For every other model from the brand, go to Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart