Menu
EUR

Case IH CX 80 tractor parts & technical data

From electrics to trailer couplings and lighting: more than 250 parts are listed here for the Case IH CX 80. Useful when you want to search by model.

257 parts found for Case IH CX 80
Show:
Axial joint 180 mm, M20 x 1,5, M18 x 1,5 L, 25 °
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °.
€66,39 €54,87 €61,08 €50,48
You save 8%
Brake disc Ø 258 mm, 15 teeth, thickness 7,8 mm Case IH
€123,61 €102,16 €113,72 €93,98
You save 8%
Perkins Sealing ring crankshaft front Ø 62,5 x 79 x 9 mm
€42,17 €34,85 €37,89 €31,31
You save 10%
Radiator cap Ø 58 mm, height 25,5 mm
Neck Ø: 58 mm. Height: 25,5 mm. More
Neck Ø: 58 mm. Height: 25,5 mm.
€16,00 €13,22
Water pump with gasket Case IH, McCormick
€129,36 €106,91 €119,01 €98,36
You save 8%
Door lock, right Case IH CX 50, MX 90C, Deutz-Fahr D 4507C, Intrac 2004
Pin three-point parts IHC 3210-4240, C 50-90, CX 50-100
€39,71 €32,82 €36,53 €30,19
You save 8%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod Ø: 10 - 22 mm. More
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unhe...
€48,90 €40,41 €44,99 €37,18
You save 8%
Walterscheid Piton Fix rail width 309 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.723,50 €1.424,38 €1.362,61 €1.126,13
You save 21%
HD-telescopic arm left Case IH CX 50, MXM 180
€280,82 €232,08 €258,35 €213,52
You save 8%
Temperature sensor 12 V, 1/2" NPT, C 50-90, CX 50-100
Version: 12 V | 1/2" NPT. Thread: 1/2" NPT. More
Version: 12 V | 1/2" NPT. Thread: 1/2" NPT.
€67,92 €56,13 €62,49 €51,64
You save 8%
Potentiometer instelpunt powerlift with connection cable
Version: For power lift set point, Connection cable with plug connection. More
Version: For power lift set point, Connection cable with plug connecti...
€539,45 €445,83
Maintenance switch air filter, differential pressure switch
Version: Differential pressure switch, 2 blade terminals. More
Version: Differential pressure switch, 2 blade terminals.
€72,56 €59,97 €66,76 €55,17
You save 8%
Symbol PTO shaft green
Version: Green, front PTO. More
Version: Green, front PTO.
€4,19 €3,46
HELLA Bulb holder 12 V with built-in bulb
HELLA
Nominal voltage: 12 V. Additional information: • With built-in 12 V bulb • Bulb cannot be changed. More
Nominal voltage: 12 V. Additional information: • With built-in 12 V ...
€5,06 €4,18
Knob black for light switch
Version: For light switch. More
Version: For light switch.
€34,03 €28,12
Switch built-in dashboard
Version: dashboard. More
Version: dashboard.
€26,68 €22,05
Rocker switch front PTO, built-in dashboard
Version: Mounting: dashboard. More
Version: Mounting: dashboard.
€92,27 €76,26 €84,89 €70,16
You save 8%
Cobo Relays N/O-contact 12 V / 70 A, 4-pin, 6,3 mm blade terminal
Cobo
Version: 12 V / 70 A, with bracket, 4-pin, 2x 6.3 mm / 2x 9.5 mm. More
Version: 12 V / 70 A, with bracket, 4-pin, 2x 6.3 mm / 2x 9.5 mm.
€39,76 €32,86
Ball joint left for track rod 170 mm, C M18 x 1,5 L, D M18 x 1,5 L
A: 170 mm. C: M18 x 1,5 L mm. D: M18 x 1,5 L mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 170 mm. C: M18 x 1,5 L mm. D: M18 x 1,5 L mm. E: 20 mm. F: 22 mm. T...
€85,92 €71,01 €79,05 €65,33
You save 8%
Carraro Bearing bush front axle 30 x 34 x 30 mm John Deere, Massey Ferguson, Case IH
Carraro
Outer Ø: 34 mm. Inner Ø: 30 mm. Length: 30 mm. More
Outer Ø: 34 mm. Inner Ø: 30 mm. Length: 30 mm.
€9,55 €7,89
Carraro Bronze bearing Ø 38,3 x 34,9 x 34,5 mm Case IH
Carraro
Outer Ø: 38,3 mm. Inner Ø: 34,9 mm. Length: 34,5 mm. More
Outer Ø: 38,3 mm. Inner Ø: 34,9 mm. Length: 34,5 mm.
€7,10 €5,87
Sealing ring Case IH
Brake plate outer Ø 259,1 mm, inner Ø 206,2 mm, 7 mm thick, 3 teeth
Thickness: 7 mm. Number of teeth: 3. Outer Ø: 259,1 mm. Inner Ø: 206,2 mm. More
Thickness: 7 mm. Number of teeth: 3. Outer Ø: 259,1 mm. Inner Ø: 206...
€89,77 €74,19 €82,59 €68,25
You save 8%
VICTOR REINZ Crankshaft seal rear Ø 133,3 x 158,7 x 12,7 mm
Borg Warner Fan clutch M24 x 1,5 L, Ø 82,55 mm Case IH, McCormick
Borg Warner
Thread: M24 x 1.5 L. PCD: 82,55 mm. More
Thread: M24 x 1.5 L. PCD: 82,55 mm.
€562,25 €464,67 €472,97 €390,89
You save 16%
Radiator Case IH C 90, CX 70 - CX 100, McCormick MC 80 - MC 100
To fit as: Case IH Serie Compact (C 90), Serie CX (CX 70, 80, 90, 100), Serie MX (MX 80C, 90C), McCormick Serie MC (MC 80, 90, 100). More
To fit as: Case IH Serie Compact (C 90), Serie CX (CX 70, 80, 90, 100)...
€718,65 €593,93 €661,16 €546,41
You save 8%
Fan clutch M24 x 1,5 L, hole spacing-Ø 82 mm Case IH
Weight: 3000 g. Thread: M24 x 1.5 L. PCD: 82 mm. Equipment: 560 Drive. Menke no.: 95210. More
Weight: 3000 g. Thread: M24 x 1.5 L. PCD: 82 mm. Equipment: 560 Drive....
€260,04 €214,91 €239,24 €197,72
You save 8%
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm. More
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm.
€23,70 €19,59
Hinge cab door right upper Case IH CX 50-100, MX 80C-90C
€35,35 €29,21 €32,52 €26,88
You save 8%
Showing 193 - 240 of 257

Case IH CX 80 parts: cab, switches and steering

A cab door that will not stay open, a front PTO switch that needs two presses, steering that has grown vague. On an older CX 80 the jobs are often small but they wear on you. This page lists more than 250 parts for the Case IH CX 80, with makes including GRANIT, HELLA, MAHLE, ROCKINGER and Walterscheid.

Cab hardware

  • Gas struts for the door, roof hatch and rear window.
  • Cab door hinges, such as the upper right one.
  • HD telescopic mirror arms.
  • Tractor seats for a tired cab.

Electrical

On the dashboard there are rocker switches, for example for the front PTO, along with rotary switches and symbol inserts such as the hazard light symbol. Behind the panels, relays and potentiometers are available, and a replacement starter motor is there for when the engine will not turn over.

Steering, engine and linkage

Ball joints and axial joints take the slack out of the steering. Engine side, you will find sealing rings including the front crankshaft seal, and O-rings. Three point linkage pins complete the list.

An axial joint sits further in than a regular ball joint and is harder to check. Grip the track rod near the joint and push it lengthways. If you feel a clunk, the axial joint is worn. Renew a split boot at the same time and have the toe in reset afterwards. If a dashboard function drops out, swap its relay for an identical one from the same fuse box first. If that cures it, a new relay is the answer.

Finding the matching part

Take the type and serial number from the type plate first. For switches and relays, the reference number on the housing and the plug shape tell you most. For a ball joint, length is only part of the story, the thread and the taper matter just as much. Measure the old joint once it is out and check those figures against the product details.

Gas strut tip: where a door or window has two struts, replace both together or it will pull crooked. Fit each strut with the rod pointing down so the internal seal stays lubricated and the strut lasts longer.

Other CX models

The Case IH CX 70, Case IH CX 90 and Case IH CX 100 each have a dedicated page with the parts listed for that tractor. To see the whole make, go to Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart