Menu
EUR

Case IH CX 80 tractor parts & technical data

From electrics to trailer couplings and lighting: more than 250 parts are listed here for the Case IH CX 80. Useful when you want to search by model.

257 parts found for Case IH CX 80
Show:
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm. More
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm.
€22,70 €18,76
GRANIT Feed pump including gasket 4 bores, hole spacing 25 x 44 mm
GRANIT
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 44 mm, Flange to lever end: 34 mm. More
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacin...
€38,50 €31,82 €36,55 €30,21
You save 5%
GRANIT Hinge cab door bottom left Case IH CX 50, SPX3320
€153,51 €126,87 €145,80 €120,50
You save 5%
Hinge for cab door, right lower Case IH CX 50, MX 90C
€80,36 €66,41 €76,30 €63,06
You save 5%
Handle rear window lock Case IH, New Holland
€69,67 €57,58 €66,15 €54,67
You save 5%
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Ri...
€16,10 €13,31
Gas strut side-, for- or rear window 200 N, 490 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: Side window, windscreen or rear screen. Form: 6. More
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: Side w...
€34,59 €28,59 €32,85 €27,15
You save 5%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod Ø: 10 - 22 mm. More
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unhe...
€46,86 €38,73 €44,50 €36,78
You save 5%
HD-telescopic arm right Case IH CX 50, MXM 180
€269,09 €222,39 €255,60 €211,24
You save 5%
Pressure switch air conditioning line with union nut, connection cable and plug
Version: Connection with union nut, Connection cable and plug. More
Version: Connection with union nut, Connection cable and plug.
€130,07 €107,50 €123,55 €102,11
You save 5%
GRANIT Potentiometer receivers vierwielaangedreven as Carraro
GRANIT
Version: Receiver - four-wheel drive axle (Carraro). More
Version: Receiver - four-wheel drive axle (Carraro).
€259,31 €214,31 €234,60 €193,88
You save 10%
GRANIT Symbol PTO shaft green
GRANIT
Version: Green, front PTO. More
Version: Green, front PTO.
€4,01 €3,31
GRANIT Rocker switch EHR rear operation built-in rear on fender
GRANIT
Version: Mounting: on the rear mudguard. More
Version: Mounting: on the rear mudguard.
€171,82 €142,00 €163,20 €134,88
You save 5%
GRANIT Knob black for light switch
GRANIT
Version: For light switch. More
Version: For light switch.
€11,25 €9,30
Knob black for light switch
Version: For light switch. More
Version: For light switch.
€32,60 €26,94
Cobo Relays N/O-contact 12 V / 70 A, 4-pin, 6,3 mm blade terminal
Cobo
Version: 12 V / 70 A, with bracket, 4-pin, 2x 6.3 mm / 2x 9.5 mm. More
Version: 12 V / 70 A, with bracket, 4-pin, 2x 6.3 mm / 2x 9.5 mm.
€42,56 €35,17 €38,50 €31,82
You save 10%
GRANIT Electric cooling fan Case IH C 80-90, CX 80-100
€261,66 €216,25 €236,70 €195,62
You save 10%
LUK Clutch kit without release bearing Case IH, McCormick
LUK
Contents: Pressure plate 458131025410, clutch plate 458331023510 | Supplementary set: Without release bearing More
Contents: Pressure plate 458131025410, clutch plate 458331023510 | Sup...
€832,49 €688,01 €753,20 €622,48
You save 10%
Showing 193 - 216 of 257

Case IH CX 80 parts: cab, switches and steering

A cab door that will not stay open, a front PTO switch that needs two presses, steering that has grown vague. On an older CX 80 the jobs are often small but they wear on you. This page lists more than 250 parts for the Case IH CX 80, with makes including GRANIT, HELLA, MAHLE, ROCKINGER and Walterscheid.

Cab hardware

  • Gas struts for the door, roof hatch and rear window.
  • Cab door hinges, such as the upper right one.
  • HD telescopic mirror arms.
  • Tractor seats for a tired cab.

Electrical

On the dashboard there are rocker switches, for example for the front PTO, along with rotary switches and symbol inserts such as the hazard light symbol. Behind the panels, relays and potentiometers are available, and a replacement starter motor is there for when the engine will not turn over.

Steering, engine and linkage

Ball joints and axial joints take the slack out of the steering. Engine side, you will find sealing rings including the front crankshaft seal, and O-rings. Three point linkage pins complete the list.

An axial joint sits further in than a regular ball joint and is harder to check. Grip the track rod near the joint and push it lengthways. If you feel a clunk, the axial joint is worn. Renew a split boot at the same time and have the toe in reset afterwards. If a dashboard function drops out, swap its relay for an identical one from the same fuse box first. If that cures it, a new relay is the answer.

Finding the matching part

Take the type and serial number from the type plate first. For switches and relays, the reference number on the housing and the plug shape tell you most. For a ball joint, length is only part of the story, the thread and the taper matter just as much. Measure the old joint once it is out and check those figures against the product details.

Gas strut tip: where a door or window has two struts, replace both together or it will pull crooked. Fit each strut with the rod pointing down so the internal seal stays lubricated and the strut lasts longer.

Other CX models

The Case IH CX 70, Case IH CX 90 and Case IH CX 100 each have a dedicated page with the parts listed for that tractor. To see the whole make, go to Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart