Menu
EUR

Case IH JX 1080U tractor parts & technical data

This page groups more than 200 parts for the Case IH JX 1080U from the JXU series, so trailer couplings, electrics and lighting are easy to find.

214 parts found for Case IH JX 1080U
Show:
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
€123,54 €102,10 €117,35 €96,98
You save 5%
GRANIT Idler pulley engine cooling Ø 65 mm Case IH, Steyr, New Holland
€208,57 €172,37 €198,10 €163,72
You save 5%
GRANIT Hinge for for- and rear window
GRANIT Bowden cable rear operation 2410 mm Case IH
GRANIT
Length: 2410 mm. More
Length: 2410 mm.
€40,54 €33,50 €36,65 €30,29
You save 10%
GRANIT Rocker switch EHR built-in rear on the fender
GRANIT
Version: Mounting: on the rear mudguard. More
Version: Mounting: on the rear mudguard.
€108,89 €89,99 €98,50 €81,41
You save 10%
Cobo Work lamp H3, 12 V, 55 W, angular, 158 x 96 x 85 mm, hanging
Cobo
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Nominal voltage: 12 V. Power consumption: 55 W. Mounting size: 117 mm. Bulbs incl... More
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. N...
€94,68 €78,25 €89,90 €74,30
You save 5%
GRANIT Flasher unit 12 V, 16 blade connections, with holder
GRANIT
Version: 12 V, with bracket, Control unit for indicator and hazard warning lights, 16 blade terminals. More
Version: 12 V, with bracket, Control unit for indicator and hazard war...
€242,98 €200,81 €230,80 €190,74
You save 5%
Radiator cap reservoir Ø 57 mm, height 25 mm
To fit as: John Deere 7600, 7700, 7800, 7610, 7710, 7810, 7720, 7820, 7920, 7630, 7730, 7830, 7930, 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T... More
To fit as: John Deere 7600, 7700, 7800, 7610, 7710, 7810, 7720, 7820, ...
€15,30 €12,64
GRANIT Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
GRANIT
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional information: Unheated | Installation location: Right/left | To fit: Case... More
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Add...
€482,81 €399,02 €458,65 €379,05
You save 5%
Clutch plate 310, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Additional information: Made in...
€87,75 €72,52 €83,35 €68,88
You save 5%
Eaton Drive pinion transmission 2,65 kg
Eaton
Reference no.: 5172047 More
Reference no.: 5172047
€401,48 €331,80 €381,40 €315,21
You save 5%
GRANIT Connecting rod bolt M10 x 1,25 x 52 mm Case IH, New Holland
GRANIT
Dimensions: M10 x 1.25 x 52. More
Dimensions: M10 x 1.25 x 52.
€7,70 €6,36
GRANIT Copper double ring inner-Ø 6 mm, outer-Ø 10 mm, height 7,3 mm
GRANIT
Dimensions: Inner Ø: 6, Outer Ø: 10, Thickness: 1 mm. Thickness: 1 mm. Outer Ø: 10 mm. Height: 7,3 mm. Inner Ø: 6 mm. More
Dimensions: Inner Ø: 6, Outer Ø: 10, Thickness: 1 mm. Thickness: 1 m...
€5,25 €4,34
Crankshaft seal for Case IH, Steyr, New Holland
€34,58 €28,58 €32,85 €27,15
You save 5%
GRANIT Spring right fender Case IH, Steyr, New Holland
€52,56 €43,44 €47,55 €39,30
You save 10%
GRANIT Cylinder head gasket 1,25 mm engine F4C, 450
€84,62 €69,93 €80,35 €66,41
You save 5%
V-belt air conditioning Case IH, Massey Ferguson, Steyr, New Holland
€6,43 €5,31 €4,86 €4,02
You save 24%
Showing 193 - 214 of 214

Case IH JX 1080U parts for the cab, lighting and clutch

On a JX 1080U you spend whole days in the cab, so a sagging seat or a roof window that will not stay open quickly becomes a nuisance. This page lists more than 200 parts for the type, from GRANIT, LUK, Eaton, ROCKINGER and GRAMMER.

Seat, windows and switches

For the cab there are GRAMMER Compacto seats, gas struts for the roof window, seals for the front and rear screen hinges and rocker switches for the dashboard. Outside, you will find rear lights for the left and right side.

A tip on gas struts: fit them with the piston rod pointing down. That keeps the internal seal wetted by the oil inside the strut, so it lasts longer. Always replace the struts on a window or door as a pair, too, otherwise the new one carries all the weight on its own and soon ends up as weak as the old one.

Belts and air conditioning

For the belt drive there are air conditioning V-belts and multi-rib powerbands. A powerband is always replaced as a whole, there are no single ribs. The air conditioning compressor itself is on this page as well. When fitting a new band, make sure every pulley groove is clean, because dirt or rust in a groove eats into a rib quickly.

Clutch and transmission

In the driveline it comes down to clutch plates, single clutch pressure plates, thrust bearings for the driving clutch, sealing rings and transmission gear wheels. At the rear sits the ROCKINGER drawbar with its rail system, alongside Piton Fix parts.

When fitting a new clutch plate, centre it with an alignment tool before tightening the pressure plate. Tighten the bolts in a cross pattern and in several passes so the cover pulls down evenly and does not sit crooked. The thrust bearing goes in new at the same time. On the drawbar, make sure the lock drops into the rail without hesitation. Clean the rail and grease it lightly, and the hitch will slide easily when you adjust it.

Type plate and the JXU range

Find the type plate and check that it reads JX 1080U. After that, the reference number on the old part is your best guide when ordering. The JX 1080U belongs to the Case IH JXU range, where several more models have a page with their own parts: the Case IH JX 1090U, JXU 95, JXU 85, JXU 105, JX 1100U and JX 100U. The JX 80U and JXU 115 are part of the family as well. For any other model from the brand, head to Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart