Menu
EUR

Case IH JX 1090U tractor parts & technical data

Browse more than 200 parts for the Case IH JX 1090U from the JXU series, including electrics, lighting and trailer couplings, all matched to this tractor.

235 parts found for Case IH JX 1090U
Show:
GRANIT Idler pulley engine cooling Ø 65 mm Case IH, Steyr, New Holland
5%
GRANIT
Idler pulley engine cooling Ø 65 mm Case IH, Steyr, New Holland
Ø: 65 mm.
€208,57 €172,37 €198,10 €163,72
 
GRANIT Hinge for for- and rear window
GRANIT
Hinge for for- and rear window
€27,50 €22,73
 
GRANIT Bowden cable rear operation 2410 mm Case IH
10%
GRANIT
Bowden cable rear operation 2410 mm Case IH
Length: 2410 mm.
€40,54 €33,50 €36,65 €30,29
 
GRANIT Rocker switch EHR built-in rear on the fender
10%
GRANIT
Rocker switch EHR built-in rear on the fender
Version: Mounting: on the rear mudguard.
€108,89 €89,99 €98,50 €81,41
 
Cobo Work lamp H3, 12 V, 55 W, angular, 158 x 96 x 85 mm, hanging
5%
Cobo
Work lamp H3, 12 V, 55 W, angular, 158 x 96 x 85 mm, hanging
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Nominal vol...
€94,68 €78,25 €89,90 €74,30
 
GRANIT Flasher unit 12 V, 16 blade connections, with holder
5%
GRANIT
Flasher unit 12 V, 16 blade connections, with holder
Version: 12 V, with bracket, Control unit for indicator and hazard warning light...
€242,98 €200,81 €230,80 €190,74
 
Radiator cap reservoir Ø 57 mm, height 25 mm
Radiator cap reservoir Ø 57 mm, height 25 mm
To fit as: John Deere 7600, 7700, 7800, 7610, 7710, 7810, 7720, 7820, 7920, 7630...
€15,30 €12,64
 
GRANIT Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
5%
GRANIT
Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional inf...
€482,81 €399,02 €458,65 €379,05
 
Clutch plate 310, 22 x 25 mm, 10 splines
5%
Clutch plate 310, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Additional information: Made in Germany
€87,75 €72,52 €83,35 €68,88
 
Eaton Drive pinion transmission 2,65 kg
5%
Eaton
Drive pinion transmission 2,65 kg
Reference no.: 5172047
€401,48 €331,80 €381,40 €315,21
 
BOSCH Seal injection nozzle Ø 7 x 15 x 1,5 mm
BOSCH
Seal injection nozzle Ø 7 x 15 x 1,5 mm
€2,48 €2,05
 
GRANIT Connecting rod bolt M10 x 1,25 x 52 mm Case IH, New Holland
GRANIT
Connecting rod bolt M10 x 1,25 x 52 mm Case IH, New Holland
Dimensions: M10 x 1.25 x 52.
€7,70 €6,36
 
GRANIT Copper double ring inner-Ø 6 mm, outer-Ø 10 mm, height 7,3 mm
GRANIT
Copper double ring inner-Ø 6 mm, outer-Ø 10 mm, height 7,3 mm
Dimensions: Inner Ø: 6, Outer Ø: 10, Thickness: 1 mm. Thickness: 1 mm. Outer Ø: ...
€5,25 €4,34
 
Crankshaft seal for Case IH, Steyr, New Holland
5%
Crankshaft seal for Case IH, Steyr, New Holland
€34,58 €28,58 €32,85 €27,15
 
GRANIT Plug 30 mm for for- and rear window lock
GRANIT
Plug 30 mm for for- and rear window lock
€6,50 €5,37
 
GRANIT Cylinder head gasket 1,25 mm engine F4C, 450
5%
GRANIT
Cylinder head gasket 1,25 mm engine F4C, 450
€84,62 €69,93 €80,35 €66,41
 
V-belt air conditioning Case IH, Massey Ferguson, Steyr, New Holland
24%
V-belt air conditioning Case IH, Massey Ferguson, Steyr, New Holland
To fit as: Fendt
€6,43 €5,31 €4,86 €4,02
 
Showing 217 - 235 of 235

Case IH JX 1090U parts

On a JX 1090U the jobs that come up are rarely dramatic, but they come up often enough. A roof window that will not stay open, a rear light lens cracked by a branch, an air conditioning belt squealing on a hot day. This page brings together more than 200 replacement parts for this tractor, made by GRANIT and by suppliers such as LUK, Eaton, ROCKINGER and Cobo.

Cab, electrics and air conditioning

For the cab there are gas struts for the roof window, seals for the hinges of the front and rear screens and seats from the Compacto line. The electrical side covers contact switches, including the one at the gear lever, rocker switches, relays, rear lights and alternators. Air conditioning compressors are listed too, together with the V-belts that drive them and Powerband multi-rib belts.

A tip for the compressor belt: when you fit a new V-belt or Powerband, run a finger along the pulley grooves first. A polished, worn groove will glaze a new belt quickly. Set the tension, then check it again after the first few hours of work, because a new belt settles in and loses some tension early on.

Clutch and hitch

If the tractor is split for a clutch job, thrust bearings for the driving clutch are available here, and it makes sense to renew the bearing every time the clutch comes out. At the rear you will find drawbars and Piton Fix rails, so the coupling point can be renewed or set up for a different trailer. Sealing rings such as the piston seal used in the hydraulics complete the list.

Identifying your JX 1090U correctly

The JX 1090U belongs to the Case IH JXU range, which uses two naming styles, JX followed by a number and the letter U, and JXU followed by a number. Check the type plate before ordering so you know which name applies to your machine. The reference number on the old part is the next step, for example on the alternator housing, on the side of a relay or on the base of a switch.

Each tractor in the range has its own page, which helps when the yard holds more than one of them:

The JX 80U and the JXU 115 are part of the same range. Parts for every other model of the brand are collected under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart