Menu
EUR

Case IH JX 80 tractor parts & technical data

Servicing your Case IH JX 80? Choose from more than 180 parts for this JX series tractor, including brakes and transmission, electrics and trailer couplings.

188 parts found for Case IH JX 80
Show:
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin...
€627,55 €518,64
 
GRANIT Tank sender signal transmitter Case IH JX 60-95, New Holland TD5010-5050
5%
GRANIT
Tank sender signal transmitter Case IH JX 60-95, New Holland TD5010-5050
Version: Signal transmitter
€281,30 €232,48 €267,20 €220,83
 
SACHS Clutch plate 280 22 x 25 mm, 10 splines
5%
SACHS
Clutch plate 280 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves
€135,53 €112,01 €128,75 €106,41
 
Danfoss Orbitrol OSPC 100 ON Case IH, Fiat, New Holland
5%
Danfoss
Orbitrol OSPC 100 ON Case IH, Fiat, New Holland
Type: OSPC 100 ON / 150-1151
€1.048,56 €866,58 €996,10 €823,22
 
Bosch/Rexroth Double pump 19 + 11 cm³, B 17 x 14, 9 splines, right
5%
Bosch/Rexroth
Double pump 19 + 11 cm³, B 17 x 14, 9 splines, right
Direction of rotation: Clockwise | Output volume (cc/rev): 19 + 11 | Drive shaft...
€1.300,75 €1.075,00 €1.235,70 €1.021,24
 
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
5%
Eaton
PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Reference no.: 5185602
€188,76 €156,00 €179,30 €148,18
 
Eaton Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
5%
Eaton
Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
Reference no.: 5131169
€253,62 €209,60 €240,90 €199,09
 
Eaton Gear wheel transmission 1,57 kg Case IH, Fiat, Ford, New Holland
5%
Eaton
Gear wheel transmission 1,57 kg Case IH, Fiat, Ford, New Holland
Reference no.: 5125013
€312,66 €258,40 €297,00 €245,45
 
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
5%
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2...
€68,70 €56,78 €65,25 €53,93
 
GRANIT Ball joint 80 mm, 5/8" x 18, M20 x 1, taper 18 - 20,2 mm
GRANIT
Ball joint 80 mm, 5/8" x 18, M20 x 1, taper 18 - 20,2 mm
A: 80 mm. C: 5/8" x 18 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2...
€38,75 €32,02
 
Borg Warner Fan clutch Case IH, Steyr, New Holland
Borg Warner
Fan clutch Case IH, Steyr, New Holland
€185,70 €153,47
 
Exhaust pipe Case IH, New Holland
5%
Exhaust pipe Case IH, New Holland
€200,94 €166,07 €190,85 €157,73
 
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
5%
GRAMMER
Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€1.486,67 €1.228,65 €1.412,30 €1.167,19
 
GRANIT Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
5%
GRANIT
Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
Dimensions: Ø: 25 mm.
€48,32 €39,93 €45,90 €37,93
 
Hydraulic top link cat. 2, 580 - 798 mm, stroke 218 mm, Ø 70 mm
10%
Hydraulic top link cat. 2, 580 - 798 mm, stroke 218 mm, Ø 70 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 580 / 798 mm. Piston rod Ø D: 35 mm. Cyli...
€593,83 €490,77 €537,25 €444,01
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
23%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.498,36 €1.238,31 €1.147,30 €948,18
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
18%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.058,75 €875,00 €873,45 €721,86
 
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
23%
ROCKINGER
Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
 
GRANIT External plate 4 WD 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
5%
GRANIT
External plate 4 WD 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
Version: Thickness: 1.5 mm Inner: 100 mm Outer: 152 mm 6 teeth
€8,58 €7,09 €8,15 €6,74
 
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
5%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length ...
€56,19 €46,44 €53,35 €44,09
 
SANDEN Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, PV4, 190 ccm oil
5%
SANDEN
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, PV4, 190 ccm oil
Fixing: DM | Reference no.: 8279 | Pulley Ø (mm): 112 | Refrigerant: R 134a | No...
€646,14 €534,00 €613,80 €507,27
 
LUK Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
5%
LUK
Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintered clutch l...
€156,20 €129,09 €148,35 €122,60
 
LUK Clutch plate 280UKF 22 x 25 mm, 10 splines
5%
LUK
Clutch plate 280UKF 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25 10 grooves
€133,57 €110,39 €126,85 €104,83
 
GRANIT Clutch plate 280 22 x 25 mm, 10 splines organic
5%
GRANIT
Clutch plate 280 22 x 25 mm, 10 splines organic
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Organic clutch l...
€87,00 €71,90 €82,65 €68,31
 
Showing 49 - 72 of 188

Case IH JX 80 parts

A Case IH JX 80 that spends its days on loader work and yard jobs puts its clutch through more than any field work would. Constant pulling away, stopping and turning takes its toll on the plate, the pressure assembly and the thrust bearing. More than 180 parts for this tractor are listed on this page, from GRANIT and from manufacturers such as ROCKINGER, LUK, Eaton and GRAMMER.

Clutch work on the JX 80

The driveline section covers clutch plates, double clutch pressure assemblies, complete clutch kits for the twin plate clutch and thrust bearings for the driving clutch. The kits come without a thrust bearing, so pick that one separately.

Once the tractor is split, the thrust bearing should always be renewed. Check the flywheel face too. Heat cracks or deep scoring will wear a new plate quickly. A clutch that judders when pulling away often has oil on the lining, and then the leaking seal belongs in the repair as well. Any worn gear wheel found while the halves are apart is worth replacing at the same time.

Steering

For the front end there are ball joints, track rods and steering cylinders. Play in the steering usually shows on the road first, when you keep correcting to hold a straight line. Have someone rock the steering wheel while you watch each joint at the wheels to spot the one that moves. A steering cylinder weeping oil along its rod should not wait long either, because dirt sticking to the wet rod works its way into the seal.

Hitch, cab and cooling

  • Automatic drawbars and Piton Fix rails.
  • Compacto seats and gas struts for the rear window.
  • Radiator caps, sealing rings and seals.

A radiator cap with a hardened or cracked seal no longer holds pressure, so the engine boils sooner than it should. Only open it with the engine cold.

Identifying the correct part

The JX 80 is part of the Case IH JX series. Check the model on the type plate and take the reference number from the old part. For clutch plates, count the hub splines as well, and for ball joints note the side and the thread.

Other tractors in the JX series each have their own page:

Every other model of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart